I have a 1972. And 1967 Arien’s snowthro Snowblowers. With a 6hp and 7hp. 24” wide. They are bulletproof. One I got at the dump 10 years ago. And sold a brand new 8hp Troy built snowblower and replacement it with the older Arien’s. Heavy duty. Built to last. Today things are made cheaply ,made to throw away. I have found many of these older Arien’s snowblowers no the side of the road fixed them up and sold them. That are a good money maker for me I would highly recommend getting one to anyone. Never had an issue with the techumch motors. I think I spelled it wrong. Great video.
Thanks for the positive feedback Marshall! These are great snowblowers! And if you can find one in the trash grab it their easy money! Thanks for watching!
Just watched this video about the 1971 Ariens snow thrower. When you showed the manual and the cost comparison to today’s equipment it reminded me of my 1972 Sears Craftsman 10” table saw. It was my Dad’s and he used it as he rebuilt our house in Niagara Falls 50 years ago. I have it now and it resides with me in Northern Vermont. Typical for a 50 year old machine, parts are scarce and mostly out of production. You can tell the Ariens is a solid built machine. Same for the Craftsman table saw. Today’s equipment is made of plastic, nylon, aluminum, and thinner steel. I’m sure you will preserve the integrity of the Ariens.
I plan on keeping this machine for a very long time! Plenty of fun to be had with it! And plenty of good maintenance to do on it too! Thanks for watching!
I loved the video. I have my father's 1964 Montgomery Wards 26" snow blower . It has a 7 HP Briggs&Stratton engine. The rings are shot so I top off the oil every time I use it, but, the "smoke" keeps the Mesquite's at bay (its the Minnesota state bird). There are 6 grease zerks so I keep the grease gun warm and every second time each zerks gets a squirt. The blower housing is 3/16 steel. A couple years ago I welded along the edge of the paddles to decrease the clearance from years of wear. With just a touch of grinding the blower runs smooth with no vibration. It never goes out for less than 8" of snow, its just to awkward. This year with a 12-14 inch snow fall I powered right through it throwing snow 20+ feet. It was kinda fun, and put a smile on my face, watching the neighbors with their plastic toys TRYING to even get an initial pass. 4 hours and 4 tanks of gas (topped off the oil between 2 and 3 refill) and I had most of the city block and alley done. I had a lot of happy neighbors. The 30 something's were amazed how well a 58 year old snow blower did. In 5 to 10 years when the snow battle is beyond my abilities I'll have to find it a good home. I'm sure it will still be working and it will go with the manual and the hand written sales receipt my father stapled inside the manual.
@@GarageGear If I do anything with the engine I'll start by pulling it apart. IF the cylinder is not scored I'll just put in over sized rings (if available). If an engine rebuild isn't practical then I'd do a new engine.
I have a 1965 Ariens Snow Throw. It (and I) are both 59 years old. She did get a new engine about 20 years ago. A Briggs 10hp Snow King. Other than that it's all original. I put rubber onto 2 of the 4 impellor blades to address the wet stuff. As you saw.. she's ridiculously heavy and unstoppable with the tire chains. Have fun with your old Ariens.
I had almost the exact same Ariens my Dad bought me brand new in 1968 when we got our first house a 32” 7 hp beast.was $425 new then and I made $500 in the first year that winter snow blowing in our neighborhood and paid him back.Sold it to a friend in 1996 and bought a Ariens Deluxe 8 hp 24” snowblower for $1400 and it wasn’t as durable as the 1968 Ariens and now my other friend has that snowblower.
I had a snapper snow blower that was given to me that did not run, put on a new carb and used it very successfully for 7 years and then the engine finally died. It was very similar to the Ariens. Very heavy metal and I called it Tank. It put impeller pads on it and it would go through anything but very heavy to move around. I did restore it with paint, new belts, skids and I put a light on it. The electric start gave out in the 3rd year I had it but it was relatively easy to start until the engine went away. I would love to find another one of these or the Ariens again. They just don't make them like that anymore unless your willing to mortgage your house for one. Love your channel.
I have a 72 that is fully functional. I changed the engine a number of years ago for easier starting by hand plus and additional HP. I am in the Lake Effect belt on the East end of Lake Ontario. I put it into like new condition and retired it with many fond memories. There is a personal story that goes with it. I replaced it with a Professional Ariens.. This 72 blower has moved a lot of heavy snow. The only things that wore out were the belts, the disk, the bushings, the shoes and the tires. The only thing that broke was the chute gear ring which needed a small weld. My neighbors burn out their box store junk in three to five years.
I have the same blower , found it in a garage sale in 1984 for $75. I have used it the last 38 years. This unit stays in the shed in sub freezing conditions and is one of the easiest engines to start. I just do the basic maintenance, change oil before the start of winter , check belt , shear pins , grease and thing of that nature. It’s like a timex , takes a licking but keeps ticking . I live in Hudson Valley in NY and some years we get dumped with more then 20 big storms, the driveway is about 200 feet long with an area 30x50 near the garage. So this unit gets a work out. And I am please it keeps working . I will probably die before it dies. Nice find , your unit is in much better condition then mine .
I've got a nice big scar on one knee from an incident with this same model machine back in the 80s, though it looks like yours is either slightly newer or was retrofitted with shear pins. That cool trick of letting it drive itself is fun on flat, level pavement with no ice, but is something to be wary of in actual use. With a well running engine a big chunk of plowed ice at the end of the driveway hit the augur in a way that caused the whole machine to kick back, knocking me over, and the lack of any kind of dead man switch meant it kept running and drove over me. I was lucky, it climbed the ice once I wasn't holding the bars to keep the front end down, so instead of losing the leg I just got 37 stitches and a tetanus shot. They're awesome machines, and I think it's a great thing that you're taking the time to restore this one. If you're planning on really using it I encourage you to figure out some way to add a deadman switch to kill the engine when released. Even something simple like the tethers used on snowmobiles and jetskis would go a long way improving the safety of the machine.
You can add a wire to ground the sparkplug and kill the engine and either put a switch on the "dash" or a plug in switch connected to a leash connected to you like some modern machines have, like personal watercraft. You may already have wires that can kill the engine by the throttle pivot or on really old stuff without a sparkplug boot a pivoting or rotating metal lever you move to ground the end of the plug in which case use wires and a swich like I first said. Still the old machines didn't have deadman controls and that carries some risk... Still if you had a cord you could have pulled or got pulled in a fall you would have had a chance to have the engine shut off... I put an electric kill switch on my old machines on the "dash" if they don't have deadman controls and even when they do I do it as its quicker than getting to a throttle on the engine...
I have the 6HP model around the same year. Paid $200 for it 25 years ago. Downstate from you. Catskill Mountains. Bought a new Ariens commercial model 4-5 years ago but kept the old one. Need to uncover it and bring it into the garage and go through the carb, tank, plug and get her running again. Used to start on the second pull EVERY time and it sat outside all winter with a tarp over it. Ariens is the only blower I'll buy. Great vid, brings back memories, been in this house on a lake for 37 years. Let it snow baby.
Those snow blowers are far better than anything they build today, they're built like tanks and can literally last forever and with a few modifications, they can throw snow as good as a modern one and dig far better. I had one I put a predator 212 on it and I had a taller chute and the thing was a little beast, no joke. It would devour anything in his path, it didn't matter how much snow it was or how heavy it was that thing went through everything. Only drawback is those things do not have safety's. Once you engage that thing it's on. So make sure you know how to use that thing well before you start using it other than that that thing is a beast.
Thanks for sharing all this info Mr Tecumseh! And thanks for all your help a few weeks ago with the predator questions. I appreciate it! Plenty more to come with this. Already got some taller chutes to pop on it and test drive! Thanks for being a cool fan! 👍
I know it's not the same subject but it is about the same company. I have an old lawn mower Made by them and I call it the tank. it was self propelled at 1 time And does not work now but I picked it up for $25 & a 15 minute ride probably 10 years ago now, this thing will go through anything do anything it's an absolute beast. I think the quality of their products are unmatched by today's standards.
Yea until it blows up mines sitting in a scrap pile with a hole in the block and the crank snapped off the head no smoke no knocking just boom clat clat and saw oil shoot out the side
HOLY CANOLI!! I have this same machine. I did have the engine replaced about 8 years ago and I have nick named this machine "the bear". Because it goes through anything, always starts, has minimal maintainence. I bought it used in the early 1980's from a friends father who was the original owner on Cape Cod. I have used it every year here in Connecticut and it has never failed me. Same chains, same controls as the one you have. I bought a new "professional" Ariens for a property in Maine I have and it can't hold a candle to this model for how it was built.
That is amazing. I love that machine. I can honestly say the new Toro PowerMax HD 1030 OHAE can throw the snow about over my shoulder as well. Proves useful when working the driveway and I don't want to throw the snow where I have already eliminated it. Already have had so much snow this year I had to change the oil and it was not bad at all.
Great memories! I had a 1969 Ariens I believe 7.5 HP, 24 in. pick-up on it. What a piece of work for that time. My Father-in-law gave it to me in1975 after he moved and didn't require a blower. I ran that machine up until 2009. Being an old farm boy when I went out to blow snow I didn't stop at just doing my driveway, I'd do at least 6 and sometimes up to 10 neighbours drives. Loved the outdoors and kicking ass of all these newer snowblowers and their plastics chutes. The only problem with that old blower I found was the size of the wheels and having to use chains on the tires. Your find is one incredible piece of work. Bet you're going to put rubber paddle extensions on the throwing chamber arms. Traded my old unit in on a 2010 Ariens 9hp with 28 in. cut. Once you go Ariens you always stay Ariens.
Fellow Buffalonian here. My Dad gave me his Ariens about 20 years ago, mine was probably a few years older the auger handle was a bit different and there was no electric start. I finally retired it a few years ago. I found your channel shopping for a new one, but after using one of these for 20 years I couldn't get myself to buy a new one yet as they just felt and looked so cheap compared to these. Still shopping, enjoy yours!
im buffalo too. my 70s toro was heavier built than my new ariens classic.ariens is doing ok 2yrs in, much bettet than a new cub cadet 3 stage i had. the cub (world) engine was ok but the chassie, frame, controls were not good. way to much plastic, cheap impeller bearings.
Hey Dnottis! Awesome that youre a local! Do you still have the old ariens? The new ariens are great even though they’re not built the same as they used to be. Thanks my friend! Go Bills!
@@GarageGear the old one was a toro 826, brother in law had the 824. both really robust machines. tim at hodgesons pools told me nothing is built now that is as durable. so he took my 4 yr old cub 3 stage for repair, auger bearing and belts etc (i was ill at the time) and shook his head and walked out with ariens ax306. i will follow your procedures. by the way i have your honda mower roo. your tiguan s review is spot on, i like it but find it hard to part with my toureg tdi !
@@geodot595 wow I haven’t been to hodgesons in a long time. He’s right though! They stopped building durable stuff a while ago. Awesome you have the same mower! You’ll get plenty of miles out of it! Sounds like you’ve watched a number of videos!
Just picked up one of these today. Literally the same one. Never owned a snowblower so I'm hoping it does me well. It cranked right up and sounds good. Louder than I imagined but seems like a beast. Looking forward to the first snow
I bought mine in 1969 6 hp for $296.00 Used for 45 years. Have original sales literature. Finally the engine gave out. Bought a new Ariens 24” blower. Traded in 4 old Ariens blowers. Still miss mine. Best snow blower ever!
I have a 1987 Ariens 24". I LOVE IT. I bought mine in 2021 for 100.00. it was well taken care of. I replaced the tires and the carb and put a high-end oil in it. Its a working machine and built much better than any current day blower. It has a very heavy grade steel, unlike the newer machines
I picked up a Ariens Sno Thro 1032 32" 10 HP Tecumseh Engine, about 6 years ago. I think it is about 35 years old. It is a much better machine made with better parts and requires much less maintenance than my 2014 Ariens SHO Platinum 30" model. Great videos, by the way, very useful!!! Keep up the great work!
The older stuff is far better than anything new nowadays! That’s a big snowblower too! I’m guessing you’ll probably have your driveway done in a matter of minutes! Thanks for being a cool fan Adkbuck!
@@GarageGear JB all good points. My driveway is 450 feet long in the Syracuse area snowbelt so she gets a good workout! Have a great vacation in the warmer climate!!!!😍
I got a ariens 24 inch compact I think it's from 2010ish and haven't done any maintenance to it haven't done anything besides add gas and works like it's brand new and it goes through some of the heaviest snow with ease.
Brings back memories of my 1968 Ariens that I bought used for $75 in 2000. I had it for nine years and the electric start burned up when I was starting it. I was not able to start it without the electric start due to a back problem. I gave it to a friend and he still has it. I always said it had one safety feature ... it held a held about a quart of gas and when that ran out it stopped. Otherwise you could chew up the neighbor's cat or dog, sticks, or, I once had feathers come out as there was a frozen bird under the snow. I hit a newspaper once and it cut it in half ... I changed the sheer pins after that experience. I replaced it with an Ariens 1130 ... it's a great machine, wider, more power but it has too many safety features for my liking. Thanks for the video and i will subscribe .
Great video as always, my dad had the exact same Ariens when I was little, I am 53 now and can remember him engaging those drive and auger handles. They definitely don't make them like they used to, everything is cables now that break instead of hard linkage. Good teaser on the repower, I watched a lot of snow blower repower videos on here using Predator engines and it seems to work out good. I will look forward to your future videos working on this Beast.
@@GarageGear Small Engines should be running ethanol-free gas ideally. There is an app called Pure Gas, it will tell you where the ethanol free stuff is in your area.
I have a 1966 like yours, mine has painted handlebars, it came with a 4 hp Tecumseh, I replaced with a 5 hp 30 years ago. I bought it from my neighbor Augie a bit before he passed on. I have the original receipt from when he bought it in 1966, he paid $252.35. It has served me well, tough as heck!
I have an even older unit I inherited from my father. Back when my brother and I were much younger we would set it up and throw pine cones and acorns at it and watch it launch then 2 back yards away. It’s a 1954! It originally had a 5 hp engine, I upgraded to a 10hp snow king. Looks very much like yours. I only pull it out on the really big storm but I also love this machine
A friend gave me one today i believe its a 1963 10ML60D i'm doing research on it and came across tour video which was very good and helpful. I got it really running nice now i have to fix the flat and do some restoration. Its in really good shape like yours . It will be a fun little project its actually 5 years older than me . I like the predators for the swap i may do that with the 212 . The blower was free so i can restore it complete for under $200 if i do the swap .
Awesome machine and what incredible condition it's in! The 1st Ariens snowblower I ever owned was that exact model. Bought it back in '96 with a blown connecting rod in the engine for $75. Repowered it with a brand new Tecumseh 8hp engine. Was into the machine for around $400 total. I used it for 6 years, made some money with it, and then sold it for $500. Wish I still had it 😭😂🤣. I'm very much looking forward to following the build, can't wait for the next episode!👍
Very cool history on your past machine Smallblock! I like the fact that these are solid metal! Plenty to do on this thing! Thanks for being a cool fan as always bud!
@@daviddave8266 good question David! I would have to say the older ariens would outlive the newer craftsman! I would lean toward the ariens! Thanks for watching!
50 yrs ago I was renting a room an 1/8th mile back off a country road. That was the year we got 200" of snow. The apartment owner bought an Ariens rear tine rototiller and an Ariens 10HP (Briggs) two stage snow blower. I swear that was the best snow blower was the best I ever used. Eventually she hired a farmer with an 4' x 8' twin fan snow blower hooked to the back of his tractor. But loved that snow blower.
Love the videos JB! Keep ‘‘em coming on this Sno Thro. Just picked up an identical 1970 7hp as well this past summer and it has performed amazingly for me all winter long. I am in love with these machines, as someone who was a big fan of the 70s in general. I am too thinking I will eventually do the predator 212 swap on it myself, as well as the obvious impeller mod. Love the in depth video! And very jealous of all of the original paperwork with the machine
The new engine is definitely the way to go! No fighting with it to start it. First pull and BANG! I have the impeller kit planned for the coming weeks. Stay tuned my friend! Plenty more fun to be had with this thing! My hopes are that these videos help some out there that like you are planning on swapping the engine!
I just picked up a 1973 model, almost like yours for $50 and I have the same plans as you. I am going to restore it. I'm just not sold on those mass produced MTD machines. I had several over the years and if I had one of these all my 40+ years of owning one, I'd still have it today! Thanks for the vid
You can tell it was well taken care of because the chrome on the handlebars looks great. The Turf Saver tires+chains work ok, but you'd enjoy using it more if it had a set of modern snowblower tires like Snow Hogs or X-Tracs.
I had one of that vintage with the 11hp and I believe it was 30" opening. I was snow-blowing my long paved driveway one night after work and on the way out lost a tire chain and didn't realize it. i found it on the way back. What a noise! Stopped it dead and bent something in there. I finished out the winter with the handlebars shaking like an old Harley. I sold it for parts in the spring. I wish I still had it.
I still have my 1975 Toro 8/32 that I bought brand new and it is in excellent original condition and my 2005 11/24 Ariens pro that I bought new. The older ones are definitely built out of heavier materials.
I had a slightly newer 724. It had a plastic gas tank. That single belt blower would walk circles around my current 80's dual belt 724. I had a customer who had a steep driveway with about a foot of heavy wet snow. As I started the machine was blowing. Then it bogged and clogged. I kept digging. It literally fired the plug like a cannon and kept on trucking. The guy next door unclogging his old Toro was amazed. He said to me "That's one hell of a machine!". I replied "Nothing beats an Ariens!" I miss that machine!
Hahahahaha one woman who walks by all the time, looked at me and said, “are you losing you’re mind?” I told her it was all for UA-cam lol! Another was like, “you’re doing it wrong…!” I get all kinds of looks on my corner lol! Thanks for being a cool fan Mark!
I have an 83 Noma Canadiana I picked up for free in the summer, it had a sign on it "needs a fuel pump" lol, there is no fuel pump so I assumed it was a blockage in the fuel cup or the fuel line needed replacing, and that's exactly what it was, a $4 fuel line and 2 new clamps. I put my White away that I paid $1100 for 8 yrs ago and is the back up now. The 27" 8hp Noma is a beast and weighs what feels like 200 lbs, only thing I don't like much is the auger doesn't lock with the drive so you have to 2 hand the controls which tires out your hand after 20 mins, vs my new one that locks, love that it has a throttle to slow it down or speed it up for wet heavy stuff. All metal chute and hasn't got any rust yet.
Those old tecumsehs can be quite finicky. But, they are good engines. However you hit the nail on the head, once they get to a certain age/wear point, they are beyond just regular maintenance and would need a complete overhaul. But being that it’s so old, I’d look for another tecumseh to put on that machine. Just to keep it true to the original build. Even if it’s a larger engine, just to keep it closer to original
I like that idea but I already popped a predator on there and it’s rocking! My friend wants that tecumseh. He’s got a real talent with them! Far better than me! Like your way of thinking tho!
Hey friend, I have a 1972 6hp model. Its a beast and always starts. Got it in 1998 from a old lady with the brochure ,parts manual and receipt for $600.00 . I paid $150 and I've always said i wont buy a new one for reasons you explained. Just this year I'm gonna have to do carb work. Mine was bogging this year as well in high snow but only for about the first 20 minutes. Never used to do that. Pretty sure that would be carb.
I have this exact machine in my garage. The only difference is, my electric start sits on top of the engine. To start mine, I turn on the choke, hit the primer 5-6 times, it almost always starts on the 2nd pull. Once running turn off the choke and go to work. I do have a new Ariens on the way. I plan to tune/clean this one up and sell it next fall.
🙂I've got a 1974 Ariens 824. Inherited it from my father around 1994 that he bought it new in 1974. The 8HP Tecumseh engine is nearly unstoppable. If there's room for the snow to go somewhere after it leaves the chute, the engine won't stall, even in wet slushy snow. It's all original except a carb rebuild I did around 2005. Yah, it's difficult to start with the recoil start unless the engine is warm. I love this thing. You're right, the new snow blowers are built pretty lightly compared to these. I'll die before this thing will. And I'm older than this blower.
I like the heavy old stuff... I rehabbed a free Noma snowblower of uncertain vintage but likely from the 70s. That thing is a beast compared to blowers half it's age or less that I've used. Those blowers carried MTD, Troy Built and Yard Machine branding... I treated it as a project to restore function and was less concerned with cosmetics. I gave it a valve job as the exhaust valve was sticking badly, new skids, NOS chute, shear pins, head gasket, belts, fuel line, a tire tube, and a sparkplug. The rest was my labor, some miscellaneous bolts, and lubricants. It was a fun project and I've got a comparative beast of a machine. I will probably only need it 1-2 hours, a half dozen or fewer times per year, so it could last for another 20+ years. 🤞
I own 6 Toro 20 Snow hounds from 1964 & 1965 I have re - ring them and they all run like a stripped ass ape a few years ago I was doing my side walk it hit a pop can and threw it 25ft or better into my neighbor window.. ran it for about hour on about a 1/8 of a tank of gas a monster.!!
I have a 1966 Ariens snowblower with original engine. I had it plus 20 years. Easy to fix for me been a mechanic all my life. Install a pedal kit on blower fan and new tires long time ago. Never need chains with the new tires. This blower works great. Small amount of rust but still in very good shape for being 57 years old. Parts are still available from dealers. I bought extra belts and bushings and springs and clutch to keep this blower going for many years to come. Starts first pull or electric start as soon as you hit the button. I also have the parts and owner manuals. If the engine ever gives up I will probably put a Honda engine on it. But until then I will just keep blowing winter away. On your machine you have probably swap the engine but the carburetor would have been easy to fix.
Nice find JB! Looking forward to seeing that rebuild your gonna do! I’ve had my 99 Troybuilt, right after they bought out Bowlens, and that think is a beast! It’s the 8/24 did my whole driveway when we had that 7 feet of snow a few years back. Still runs great! Cheers!
My son in law had a 1970 snow thro given to him in Toronto, he did not need it and gave it to me. The 5 hp Tecumseh motor runs great. I cleaned the carb, made an air filter for it, changed the oil and put fresh gas in it. Started 3rd pull. It will eat the whole auger full of snow with hardly a whimper and ask for more. Antiques are great, this machine has found a home for life.
That is BEAUTIFUL.. My lord it is in excellent shape. They sure don't make anything today like they use to. It's a shame, they use to build machines like tanks. Crazy thing is companies just send them out built like shit they don't care about customers like they use to.. Thank you so much for sharing this. Can't wait to see what you've got planned for it
@@GarageGear awesome!!! Glad I found your channel. It would be really cool if you were able to keep the whole unit stock. I understand tho I wouldn't be worth the time or trouble to rebuild the engine. I'm super stoked, can't wait!!!!
Wow !! I have one exactly like yours. I got it from Craigs List in 2009 or 2010. The only things I have done to it is rebuilt the carb., new rubber for the transmission, new plastic gas tank, and bought a used carb. box for in front of the carb.. Oh yeah, replaced the spark plug. It doesn't throw the snow as far as the newer ones do but it throws it far enough for me. I also don't have all the books on it like you do but I wish I did. I don't have an electric starter but it always starts on the first or second pull, even the first start of the season. I love this monster. I love your video's and watch them all.
Reminds about the Amf snowblower we had when I was growing up, that machine was a beast compares to nothing that is made today. Great video keep safe and keep them coming.
I have almost the exact same model that my Grandfather gave me when he passed away 2 years ago. I have a really small driveway and don't really need a snowblower, but I love having it especially when we get a huge dump of snow. I do have a small problem. When the snowblower is running you have to keep the choke on about 1/4 or the engine will stall. Does it need a new carb? Either than that, it runs great and always starts even at -30 C The model number on the motor is H70-130177A. Thanks!
Hey Robert! I imagine you may just need a carb cleaning and not a new carb but given it’s age anything could happen lol. Hold onto that thing! They don’t make them like they used to. Thanks for watching!
JB, what a great find. Can’t wait to see the upcoming videos on this. Btw, my 1994 Ariens 824 (that I still use today) points backwards but only when cranked to the left. I always felt like that mine was built like a tank. Definitely don’t make them like that now.
They don't make them like that anymore, surely for some sort of safety reason, but on the current Ariens Deluxe models with the auger style crank you can do an easy modification to allow it.
My father had 1 he bought brand new It's around 42 years old still runs and does not smoke at all. He still had the original paperwork and the snow chains they have never been used. It's never been off the pavement sense he bought it! The only time it's been out of the garage was while it was in use. He is anal about upkeep on any and everything he owns my grandfather was the same way. Now it's ours. The starter popped loose. 4 heliciols and some lock tight later. The beast lives again! Got a fuel leak to fix and she needs a breather.
Hey Dwayne and Tina! Sounds like that machine was very well taken care! And withe a few minor fixes here and there you’ll be good to go for winter. Thanks for sharing!
@@GarageGear gonna follow this. And agree the tecumseh has its limits. If there is heavy slush it can still clog the thrower. I run her either on 1 or 2. I never hit 3 due to the hill of the driveway I have. The throw over angle helps me tons
I have a 1962, 9000 series 24 inch Ariens still going strong today! Living in the mountains, we get dumps of snow that only my Ariens can handle. I am the 2nd owner and I have replaced the original 7 hp with a Powerfist 7 hp and nothing can touch it! Koodoos to you on your purchase, keep it forever!
Most likely, theres nothing wrong with the engine. Asimple tune up and carb clean and it will run great. You cannot expect a 7 horsepower machine to enjoy eating up a hege pile. My 10 horse has trouble with snow over 18 inches high. You just back off a bit or go somewhat slower. Also, check the gasket between the carb and block, it could be dried up.
I have the 824 Ariens of this era. What a tank! The thing is AWESOME and only paid $80 for it. The best way to start these old battle axes is to pump the primer until you see fuel drip from the carb, full choke and probably two pulls although mine usually starts on the first pull. I have buried it in snow deeper than it is tall, no problem. Snowplow windows of packed ice and snow that cover the front bumper of my Jeep Wrangler, no problem. Now I'm looking for the 1032 from the same era. I like my Ariens so much I named it Frosty.
I use PB Blaster Dry Teflon inside my chutes and impellers between rounds after I wash the crud out and dry them. I also coat my entire machines in it before I cover them for the summer. Then I just wipe them down in the fall.
Very cool. Definitely reenactment of that picture is in order. I remember those machines with the auger running at all times. Sounded like a tank or a violent death coming at you. If you listen carefully you can still hear the profanity from the past hanging in the air on those subzero February northern Chicago nights from guys attempting to start these machines. Great memories
Ahahahaha profanity in the air lol! That’s hilarious! With the new engine that won’t be happening lol! I remember my dad having a go at one of these a while back too lol! 😂
A few years ago my dad (now 83 years old) gave me his 1991 Simplicity with a Tecumseh engine because it would die after running for twenty minutes and he bought a new Ariens with electric start and a headlight. I fixed the Simplicity and I have been using it every winter and I do a full maintenance every spring. I keep thinking about buying a new snowblower but after watching your video I think that I will stick with my 32 year old hand-me-down Simplicity.
Awesome piece, I collect any I see, I only run 1 but grab parts machines. I have multiple 24” and 1 32” auger. Power upgrade is in the works. Best machine I’ve had, nothing I see today for sale matches it’s heavy materials. For safety how about a simple tether cord to the ignition cut out. At least if you go down it won’t drive over pets,children or circle back and get you! Bigger tires! I’ll miss those floppy chains though😔
Hey Jim! I like the cut off switch idea! I just put bigger tires on mine. My chains were worn down pretty good and the old tires didn’t hold air well. Thanks for sharing my friend!
I had one almost identical to that one and loved it. The fuel tank is plastic and held on with bracket and not straps. Still have the motor and some of the parts like the chute. It was built super tough and very simple to use. As you show no safety features at all. Would run you down and worse. Also always used the electric start. Great video enjoyed seeing it for sure.
I have a 71 Ariens with a Tecumseh HSK70 engine that runs great now. I originally bought 2 machines and put the best parts together. Replaced most of the bearings which were worn, found some old stock hubs to replace the ones with worn keyways, and just did alot of cleaning. Original paint is in really good condition especially for over 50yrs old, the only bad spots are inside the chute and bucket that looks worn away so I just sprayed those areas with chassis and roll bar paint for now to get me through winter then I'll paint with color match in spring. The Tecumseh engine runs so good I took off the electric starter it's not needed.
I'm the proud owner of an St1136. Been throwing norther Norwegian snow for 40 years. She's a beast . Original 11hp B&S starts every season after two pulls. Was considering a new machine this year, but if it ain't broke...don't fix it. Thanks for the fun upload.
In 1971 my father's snowblower was me and a shovel. Even in 1977 I was still shoveling. I think he bought his first Ariens in '78 when I started college.
My friends dad was the same way Charlie! Then we had to dig him during a 4’ snow storm with our blower. Then he went and bought one a week later lol. Thanks for watching bud!
I’ve got the john deere version of that snowblower. Mid 70s I think. Had to rebuild the auger gear box and I got the parts from john deere last year. Repowered it with a 11 hp honda and the thing is a beast.
I had several of those Ariens. My first one was a rusty mid to late 60's model that I got for free from a friend's shed clean out. The bucket was bad on that one, so I found a same cleaner Ariens for cheap which I swapped the motor from the old one on. The carb is getting tired after a rebuild over 10 plus years ago, so I bought a new 13 dollar replacement to install. I had a 1971 8hp Ariens with the controls on the bars which worked much better, but I still like the simplicity of the basic ones with the auger clutch on the side with just one belt. As far as auger gearbox strength I have experience with that since a tomato tower got wrapped up in my first one. It took me awhile to get it unwrapped from the auger shaft, but the gearbox was unscathed. Yes they are nimble which is nice, but that could also be annoying at times considering the lighter weight in front makes the machine roll over packed snow. Yes unsafe, but if you are not an idiot they can be safe. I always spray down my bucket with silicone spray, or rust penetrant to prevent the snow from sticking before each use
That is too cool....I got my 81 White Outdoor Products Snow Boss trac drive running....I got the machine for $50 bucks....put a new carb on the 8hp tecumseh and it fired right up.....But I have no throttle control....It's either beyond wide open (over rev) or off....I think I narrowed it down to the actual throttle lever....I opened up the old carb just for fun and it had a sand like substance and sludge in it and the float is seized....it's going in the trash.....when it warms up some I will tinker with it more.....I have been throwing around the idea of a predator engine swap as you are doing.....good to know I am not the only one obsessed with snow blowers....Old and new....I am looking forward to seeing what you do with your New (to you) Vintage Ariens....My original plan was to just fix and flip it....But I don't think I can part with it....Trac drive snow blowers are just too cool.
Thanks I love it. I have a 22 year old snow throw made by toro 6 hp. Runs it’s built like a tank. Needs some TLC. I’m doing my best in getting it to run. Got it going it ran two hours n next day wouldn’t start. Any tips.
Hey John sounds like a possible carburetor issue. Especially since it will start and then not start. Give it a cleaning and let me know if that straightens it out!
@@johnhouli3450 I usually have more luck on ereplacementparts.com for older models. You won’t find parts for machine that old locally unless you go to a repair shop.
My brother in law loves his old Ariens snowblower. It was his dad's from the 70s. My dad tuned it up for him a few years ago so it's going to last another 20 at least.
I garbage picked an early 60's Ariens 6 horse with a blown engine 20 years ago, replaced all the bushings and bearings, mounted a used 7 horse and ran it to death. Bought an 8 horse and now it throws snow as good as my new Ariens heavy duty machine
Love the old paperwork. Not a surprise that they saved that, when you look at how well taken care of the machine is. I don't know what the method was to make the old photographs so much easier to see. More recent manuals with black and white have so much darkness and indistinct details that make it hard to see the parts. Many old books and manuals from before 1960 have been worked on to a half photograph, half drawing look, which is much better to illustrate what we need to see.
Just ran across your vid and a neighbor was throwing out a late sixties toro snow hound single stage fifteen years ago. It is chain driven (no. 35) and has the same thickness auger and with no safety controls at all, so when its engaged for travel it goes. The engine is pull start only and will not start except with a prime or starting fluid and I live on a hill and if I fall it will pull me down the easily. No shear pins and when I hit a curb it just bent the master link and spit the chain out. One time we had a light snow fall about 4 inches and then it rained putting a crest on top of it. The snow hound cut right threw it while the neighbors machine was riding on top of the snow pack.hahahahahahaha
Man, I’m so actually relieved I found this.. A couple of months ago I bought a old 1960s yard man snowbird and it appears to have VERY similar controls to this one, and I really had no idea how to even attempt to fire it up. Now I have a better idea of what I’m doing
I had one / snowbird I bought with shoveling money when I was 14 in 1978 it was old then 8hp Briggs picture of a bird scooping snow in its mouth I think it was wearing a checkered hat .that thing kicked butt just as good as any ariens I've owned
Just inhereted one of these Model # 910962 and it needed a little work but it started and runs great. One thing left to fix is the gear linkage. It was backed into so the handle was bent and I am hoping that filing this will make the shifter work better again.
Really liked this video (and the others you've done on this project). Now you have me rethinking whether I want to get a new (or slightly used) Ariens or look for an older model like this one. Any tips on what to look for when purchasing an older used machine like this? Thanks.
Hey Bill! Ariens makes a great machine. Even ones that are just a few years old can be a great buy! Summer is a great time to get them cheap! Aside from cosmetics on an older machine a couple things to check include the augers to make sure their spinning as they should with no grinding noise from the gear box. Check the transmission to make sure it shifts okay. And make sure the engine is a single driveshaft and not a double. This way you can swap the engine easily. Keep me posted if you find anything good!
@@GarageGear One other question about finding Ann older Ariens. Just wondering what year I should look for. When did they start using thinner metal for the housing, augers, chite, etc.and using cables in place of solid rods. Thanks.
@@billbarr3644 I’m pretty sure the rods were on them through the 70’s and 80’s. Thinner metal started around late 90’s and early 2000’s I think but I could be wrong. Hope this helps. If you have any other questions give me a shout!
I had a '74 unit that my dad bought new, but only 4 hp. did not work well. I like the newer models, 8 hp, chute distance control from handle, big tires, auto turn, a light, electric start, 2 spd reverse, 14" impeller. Much more comfortable to operate. But even with all that, for some reason i can't junk the old one!
Mine might be 30-ish years old, but runs like a tank. Yup, there ARE major safety issues (natural selection?) with them, but it runs well & strong. Mine is way overdue for a tune up. Electric start to begin the day, but after it is warmed up. If it (or I) run out of gas, starts pretty easily. At 74 years of age, (me), it is a workout. But I can take breaks if I need to. Driveway, walk, (except for 2 steps that it can't make up without some wrestling & body slamming), plus a few paths around the house for the dogs, & one for the oil delivery from the road to the back of the house. Has done me well for the about 10 years that I've owned it. Oh, and when I shovel steps, I can the auger running & throw the snow into the beast. It eats & throws the snow away. AHHH! THE GOOD OL' DAYS!
Great video! I picked up a 1971 5 hp version of this snow throw a few years ago in similar amazing shape. It is a tank. However I don't have all the paperwork yours came with. Would it be possible to scan and make those manuals etc. available as a PDF? That would be great. Also, are you documenting the repower project? That would be fun to read about.
Thanks for the positive feedback. I don’t have a way to scan those papers at the moment. I did shoot several other videos on this snowblower repower project in the playlist this videos is in! Check them out! 👍👍
Love my Ariens. I actually have 2. Mine are even older then yours. Only one works since the gears in the gear box are stripped so the auger is useless. (any ideas on how to replace the gears and where to get them?) Also, I can't seem to find what oil to use in the gear box. My search has come up with so many different answers I am even more confused then before I started. Any help?
Hey Anthony not sure where to get the augers but I read that Ariens MP90 oil is the way to go for these older gear boxes. I’ll be doing a video on this in the future here! Stay tuned!
I have a 1973 John Deere 726 , very similar to this snowblower . It burns a little oil but I get the job done ! These were built in a time to last for decades not todays garbage .
Gosh ...Back and forth...I forgot to say...I have the exact same thrower in this Video, But it now has a 8hp. Snow King on it. I am gonna try the Impeller Kit, (This spring) ie. rubber swipers as/per other video you did... can,t wait!
My daughter bought me a wool sweater like that a few years ago and it really is warm and comfortable. A lifetime investment like the Ariens. I will be wearing it when they carry me out.
Autopilot snow blower? That’s next level engineering from that 70’s ariens. But this snow thrower is a testament that they don’t make things like they used to.
My 22 year old Ariens has been pretty good as well - only had to replace the electric start. Although, after watching your pieces on belts and friction disc, I realized mine are 22 years old! Time to look at them, I think....
Hi, JB. I know this post is old and you likely will not see this, but your passion made me subscribe and comment. Your Ariens does look great and is a powerhouse. However, do you advise whether an engine replace would be worth it, when the time comes? Your use of lubes and silicone are essential- I use my original 1978 Craftsman Eager, 5hp/21” blower still today. It still pull starts, as a plus, all original except for the plug.Nothing else replaced, but I did have to weld one of the auger blades together. Another plus, my model has no belts -and is all chain driven, plus tire chains. It has a similar blower chute 6” diameter, and throws snow 20’ rooster tail high in the air😄
Hey my friend! Does it have a dual belt pulley? Some of those smaller engines had them and would make a belt swap very tough to do! Single pulleys are no problem! Let me know why you have! Thanks for watching
@@GarageGear - Thanks. Pulleys and all drive axles and gears are with chains. Looks like a 6 hp Tecumseh. I bought new in 1978, after the blizzard. You do all the same lubes and surface prep I do since I have had mine. It can really throw the snow= but as I said, I have had to weld one of the auger blades, and wondered if it is time to switch. The engine sounds very healthy.
@@Nick-dh4gm if the engine is healthy I would keep it going. A predator with one pulley would most likely be a complicated switch. Sounds like your model is iron clad!
JB: When you see a blower like this and it has chrome plated handles and an auger gearbox the size of a Model T rear differential....you know you just landed a keeper. Great vid!
I bought a used 1972 one just like it (without the electric start ) and used it from 1993 until 2008 when I replaced it with a 2006 24" Ariens 11 hp Professional. What a sweet machine.
My 1969 4HP Ariens SnowThrower has been a true champ. It just works and, most importantly, reliably. It always starts on either the first or second pull on the cord. Best of all, it does not all the dubious "enhancements" that now clutter newer machines and make them less reliable.
Love it. It's great to see to fix it up and keep it out of landfill! My 1988 8‐HP MTD Tecumseh has held up well. The delicate plastic snow chute (relpaced once @ $106) is a disgrace! What do you plan to do with the augers?
Great video like all your videos! You are making me appreciate though my Ariens EFI 24 inch machine. It’s quite a beast. 2 years old! Would not want to deal with engine issues. No authorized service centers in So Cal mountain areas.
@@GarageGear the production values in your videos are quite high and enjoyable to watch. What a garage you have! Do you think the electronic fuel injection units are good? Runs and starts great. Saved up for 18 months before getting it.
Another great video Jb, My one Ariens Snowblower I bought has the 5hp Tecumseh Engine On it, my brother in law was saying I should get a Preditor 420 CC engine From Harbor Freight to put on it and throw the snow across the Street lol Then I have another Snow blower Thats a craftsman 9Hp 28 Clearance, Had to Order Points and condensor for the Ariens and Had to order a Friction Disc for the Craftsman
@@GarageGear Was also going to say If your garage is not heated I found A Pretty Darn good Space heater at Big Lots, Heats up to 1000 Square Feet and its only 49.99 Its what I'm using for my shed lol
@@DjDaveVoom thanks for the space heater tip but I actually have a propane heater that does a decent job. Perhaps some day I’ll fully hear that garage.
I have a 70s Bobcat Snow Blower that will blow wet heavy snow up to the power lines. Not very ergonomic though. And really deep stuff is a pain - It will "tunnel" into the snow. Bought a new Troy Built. It takes 60% more HP to do the same thing. My hands are warm though... Oh and it doesn't mind 2' snow. Still have the Bobcat...
New subscriber here! Thanks for this vid! Really makes me happy seeing someone who cares about the old iron as much as myself on here! I have a similar story to that with a 1980 Yardman Snowbird 11-33 B&S! All original and I done a complete tear down to nuts an bolts rebuild of every piece and rebuilt it over 2021 back to show room condition and put some really cool add ons on it as well that really makes it a treat!! It’s definitely a tank and I’m happy that’s it’s with me! Looking forward to your build here! And YES I vote the recreation of that Ariens pic with the Xmas sweater! 👍👍👍. Again thanks for this! I really enjoyed the video an the back story as well! A great back story makes any piece of equipment all the more valuable I feel :)). Cheers!
Hey Abew! Thanks for checking out the channel! I have a lot of respect for the old stuff! Got some more videos coming on this old gem! Still looking for that sweater too! Thanks for watching!
I have a 1972. And 1967 Arien’s snowthro Snowblowers. With a 6hp and 7hp. 24” wide. They are bulletproof. One I got at the dump 10 years ago. And sold a brand new 8hp Troy built snowblower and replacement it with the older Arien’s. Heavy duty. Built to last. Today things are made cheaply ,made to throw away. I have found many of these older Arien’s snowblowers no the side of the road fixed them up and sold them. That are a good money maker for me I would highly recommend getting one to anyone. Never had an issue with the techumch motors. I think I spelled it wrong. Great video.
Thanks for the positive feedback Marshall! These are great snowblowers! And if you can find one in the trash grab it their easy money! Thanks for watching!
The gearboxes are not bulletproof when the seals fail.
Just watched this video about the 1971 Ariens snow thrower. When you showed the manual and the cost comparison to today’s equipment it reminded me of my 1972 Sears Craftsman 10” table saw. It was my Dad’s and he used it as he rebuilt our house in Niagara Falls 50 years ago. I have it now and it resides with me in Northern Vermont. Typical for a 50 year old machine, parts are scarce and mostly out of production. You can tell the Ariens is a solid built machine. Same for the Craftsman table saw. Today’s equipment is made of plastic, nylon, aluminum, and thinner steel. I’m sure you will preserve the integrity of the Ariens.
I plan on keeping this machine for a very long time! Plenty of fun to be had with it! And plenty of good maintenance to do on it too! Thanks for watching!
I loved the video. I have my father's 1964 Montgomery Wards 26" snow blower . It has a 7 HP Briggs&Stratton engine. The rings are shot so I top off the oil every time I use it, but, the "smoke" keeps the Mesquite's at bay (its the Minnesota state bird). There are 6 grease zerks so I keep the grease gun warm and every second time each zerks gets a squirt. The blower housing is 3/16 steel. A couple years ago I welded along the edge of the paddles to decrease the clearance from years of wear. With just a touch of grinding the blower runs smooth with no vibration.
It never goes out for less than 8" of snow, its just to awkward. This year with a 12-14 inch snow fall I powered right through it throwing snow 20+ feet. It was kinda fun, and put a smile on my face, watching the neighbors with their plastic toys TRYING to even get an initial pass. 4 hours and 4 tanks of gas (topped off the oil between 2 and 3 refill) and I had most of the city block and alley done. I had a lot of happy neighbors. The 30 something's were amazed how well a 58 year old snow blower did.
In 5 to 10 years when the snow battle is beyond my abilities I'll have to find it a good home. I'm sure it will still be working and it will go with the manual and the hand written sales receipt my father stapled inside the manual.
Awesome my friend! Manuals and everything. Think it’s worth swapping for a new engine?
@@GarageGear
If I do anything with the engine I'll start by pulling it apart. IF the cylinder is not scored I'll just put in over sized rings (if available).
If an engine rebuild isn't practical then I'd do a new engine.
@@tomprivate3362 sounds like a good plan Tom! Keep me posted on this!
I have a 1965 Ariens Snow Throw. It (and I) are both 59 years old.
She did get a new engine about 20 years ago. A Briggs 10hp Snow King. Other than that it's all original.
I put rubber onto 2 of the 4 impellor blades to address the wet stuff.
As you saw.. she's ridiculously heavy and unstoppable with the tire chains. Have fun with your old Ariens.
@@BrianHoff04 awesome Brian! Thanks for sharing
I had almost the exact same Ariens my Dad bought me brand new in 1968 when we got our first house a 32” 7 hp beast.was $425 new then and I made $500 in the first year that winter snow blowing in our neighborhood and paid him back.Sold it to a friend in 1996 and bought a Ariens Deluxe 8 hp 24” snowblower for $1400 and it wasn’t as durable as the 1968 Ariens and now my other friend has that snowblower.
Interesting story on your snowblower! Always wonder who ends up with previously owned equipment. Insane durability! Thanks for sharing!
I had a snapper snow blower that was given to me that did not run, put on a new carb and used it very successfully for 7 years and then the engine finally died. It was very similar to the Ariens. Very heavy metal and I called it Tank. It put impeller pads on it and it would go through anything but very heavy to move around. I did restore it with paint, new belts, skids and I put a light on it. The electric start gave out in the 3rd year I had it but it was relatively easy to start until the engine went away. I would love to find another one of these or the Ariens again. They just don't make them like that anymore unless your willing to mortgage your house for one. Love your channel.
Hey Zud! Older machines rock! Just built better! Appreciate the positive feedback my friend! 👍
I have a 72 that is fully functional. I changed the engine a number of years ago for easier starting by hand plus and additional HP. I am in the Lake Effect belt on the East end of Lake Ontario. I put it into like new condition and retired it with many fond memories. There is a personal story that goes with it. I replaced it with a Professional Ariens.. This 72 blower has moved a lot of heavy snow. The only things that wore out were the belts, the disk, the bushings, the shoes and the tires. The only thing that broke was the chute gear ring which needed a small weld. My neighbors burn out their box store junk in three to five years.
yea the bearings and steel in the old machines are much better quality than the new junk
Thanks for sharing this Edwin! I agree new stuff doesn’t last.
Agreed!
I have the same blower , found it in a garage sale in 1984 for $75. I have used it the last 38 years. This unit stays in the shed in sub freezing conditions and is one of the easiest engines to start. I just do the basic maintenance, change oil before the start of winter , check belt , shear pins , grease and thing of that nature. It’s like a timex , takes a licking but keeps ticking . I live in Hudson Valley in NY and some years we get dumped with more then 20 big storms, the driveway is about 200 feet long with an area 30x50 near the garage. So this unit gets a work out. And I am please it keeps working . I will probably die before it dies. Nice find , your unit is in much better condition then mine .
Awesome Steve! These blowers are relentless! Thanks for sharing yours!
I've got a nice big scar on one knee from an incident with this same model machine back in the 80s, though it looks like yours is either slightly newer or was retrofitted with shear pins. That cool trick of letting it drive itself is fun on flat, level pavement with no ice, but is something to be wary of in actual use. With a well running engine a big chunk of plowed ice at the end of the driveway hit the augur in a way that caused the whole machine to kick back, knocking me over, and the lack of any kind of dead man switch meant it kept running and drove over me. I was lucky, it climbed the ice once I wasn't holding the bars to keep the front end down, so instead of losing the leg I just got 37 stitches and a tetanus shot.
They're awesome machines, and I think it's a great thing that you're taking the time to restore this one. If you're planning on really using it I encourage you to figure out some way to add a deadman switch to kill the engine when released. Even something simple like the tethers used on snowmobiles and jetskis would go a long way improving the safety of the machine.
This is a really good idea! I will look into this for sure! Thanks for sharing my friend! 👍
I had one for years and when I ran it in my mind I was telling myself " that thing won't stop until it hits the pelvis bone"
You can add a wire to ground the sparkplug and kill the engine and either put a switch on the "dash" or a plug in switch connected to a leash connected to you like some modern machines have, like personal watercraft.
You may already have wires that can kill the engine by the throttle pivot or on really old stuff without a sparkplug boot a pivoting or rotating metal lever you move to ground the end of the plug in which case use wires and a swich like I first said.
Still the old machines didn't have deadman controls and that carries some risk...
Still if you had a cord you could have pulled or got pulled in a fall you would have had a chance to have the engine shut off...
I put an electric kill switch on my old machines on the "dash" if they don't have deadman controls and even when they do I do it as its quicker than getting to a throttle on the engine...
I have the 6HP model around the same year. Paid $200 for it 25 years ago. Downstate from you. Catskill Mountains. Bought a new Ariens commercial model 4-5 years ago but kept the old one. Need to uncover it and bring it into the garage and go through the carb, tank, plug and get her running again. Used to start on the second pull EVERY time and it sat outside all winter with a tarp over it. Ariens is the only blower I'll buy. Great vid, brings back memories, been in this house on a lake for 37 years. Let it snow baby.
That’s awesome my friend. Thanks for sharing. Sounds like that snowblower will last forever! I’m ready for the snow too!
Those snow blowers are far better than anything they build today, they're built like tanks and can literally last forever and with a few modifications, they can throw snow as good as a modern one and dig far better. I had one I put a predator 212 on it and I had a taller chute and the thing was a little beast, no joke. It would devour anything in his path, it didn't matter how much snow it was or how heavy it was that thing went through everything. Only drawback is those things do not have safety's. Once you engage that thing it's on. So make sure you know how to use that thing well before you start using it other than that that thing is a beast.
Thanks for sharing all this info Mr Tecumseh! And thanks for all your help a few weeks ago with the predator questions. I appreciate it! Plenty more to come with this. Already got some taller chutes to pop on it and test drive! Thanks for being a cool fan! 👍
I know it's not the same subject but it is about the same company. I have an old lawn mower Made by them and I call it the tank. it was self propelled at 1 time And does not work now but I picked it up for $25 & a 15 minute ride probably 10 years ago now, this thing will go through anything do anything it's an absolute beast. I think the quality of their products are unmatched by today's standards.
@@lawnmanmartinfan7909 totally agree lawn man! Equipment was built better back then for sure!
Yea until it blows up mines sitting in a scrap pile with a hole in the block and the crank snapped off the head no smoke no knocking just boom clat clat and saw oil shoot out the side
HOLY CANOLI!! I have this same machine. I did have the engine replaced about 8 years ago and I have nick named this machine "the bear". Because it goes through anything, always starts, has minimal maintainence. I bought it used in the early 1980's from a friends father who was the original owner on Cape Cod. I have used it every year here in Connecticut and it has never failed me. Same chains, same controls as the one you have. I bought a new "professional" Ariens for a property in Maine I have and it can't hold a candle to this model for how it was built.
Awesome JLB! Those old ones were built so much better! What kind of engine did you put on?
@@GarageGear it is a snow king, only 7hp but that has been enough.
@@jlb3675 very cool my friend! Keep it ROCKIN!
That is amazing. I love that machine. I can honestly say the new Toro PowerMax HD 1030 OHAE can throw the snow about over my shoulder as well. Proves useful when working the driveway and I don't want to throw the snow where I have already eliminated it. Already have had so much snow this year I had to change the oil and it was not bad at all.
Thanks Sam! Pointing it back is a big plus! Thanks for watching bud!
Great memories! I had a 1969 Ariens I believe 7.5 HP, 24 in. pick-up on it. What a piece of work for that time. My Father-in-law gave it to me in1975 after he moved and didn't require a blower. I ran that machine up until 2009. Being an old farm boy when I went out to blow snow I didn't stop at just doing my driveway, I'd do at least 6 and sometimes up to 10 neighbours drives. Loved the outdoors and kicking ass of all these newer snowblowers and their plastics chutes. The only problem with that old blower I found was the size of the wheels and having to use chains on the tires. Your find is one incredible piece of work. Bet you're going to put rubber paddle extensions on the throwing chamber arms. Traded my old unit in on a 2010 Ariens 9hp with 28 in. cut. Once you go Ariens you always stay Ariens.
Hey brian! Thanks for sharing! You are spot on my friend! Once you go ariens you never go back! Thanks for watching
Fellow Buffalonian here. My Dad gave me his Ariens about 20 years ago, mine was probably a few years older the auger handle was a bit different and there was no electric start. I finally retired it a few years ago. I found your channel shopping for a new one, but after using one of these for 20 years I couldn't get myself to buy a new one yet as they just felt and looked so cheap compared to these. Still shopping, enjoy yours!
im buffalo too. my 70s toro was heavier built than my new ariens classic.ariens is doing ok 2yrs in, much bettet than a new cub cadet 3 stage i had. the cub (world) engine was ok but the chassie, frame, controls were not good. way to much plastic, cheap impeller bearings.
Hey Dnottis! Awesome that youre a local! Do you still have the old ariens? The new ariens are great even though they’re not built the same as they used to be. Thanks my friend! Go Bills!
@@geodot595 I agree Geo! MTD products have way too much plastic on them nowadays! Glad to see another local in here! Thanks for watching!
@@GarageGear the old one was a toro 826, brother in law had the 824. both really robust machines. tim at hodgesons pools told me nothing is built now that is as durable. so he took my 4 yr old cub 3 stage for repair, auger bearing and belts etc (i was ill at the time) and shook his head and walked out with ariens ax306. i will follow your procedures. by the way i have your honda mower roo. your tiguan s review is spot on, i like it but find it hard to part with my toureg tdi !
@@geodot595 wow I haven’t been to hodgesons in a long time. He’s right though! They stopped building durable stuff a while ago. Awesome you have the same mower! You’ll get plenty of miles out of it! Sounds like you’ve watched a number of videos!
Just picked up one of these today. Literally the same one. Never owned a snowblower so I'm hoping it does me well. It cranked right up and sounds good. Louder than I imagined but seems like a beast. Looking forward to the first snow
@@kiethj7 awesome my friend! Congrats on your purchase!
I bought mine in 1969 6 hp for $296.00 Used for 45 years. Have original sales literature. Finally the engine gave out. Bought a new Ariens 24” blower. Traded in 4 old Ariens blowers. Still miss mine. Best snow blower ever!
Crazy price back in the day! Thanks for sharing Dave!
I have a 1987 Ariens 24". I LOVE IT. I bought mine in 2021 for 100.00. it was well taken care of. I replaced the tires and the carb and put a high-end oil in it. Its a working machine and built much better than any current day blower. It has a very heavy grade steel, unlike the newer machines
Thanks for sharing! Glad it’s working well for you! Hope you many more seasons with it.
I picked up a Ariens Sno Thro 1032 32" 10 HP Tecumseh Engine, about 6 years ago. I think it is about 35 years old. It is a much better machine made with better parts and requires much less maintenance than my 2014 Ariens SHO Platinum 30" model. Great videos, by the way, very useful!!! Keep up the great work!
The older stuff is far better than anything new nowadays! That’s a big snowblower too! I’m guessing you’ll probably have your driveway done in a matter of minutes! Thanks for being a cool fan Adkbuck!
@@GarageGear JB all good points. My driveway is 450 feet long in the Syracuse area snowbelt so she gets a good workout! Have a great vacation in the warmer climate!!!!😍
@@adkbuck oh you definitely get the snow! Thanks my friend! It was a great trip! Much needed sunshine!
I got a ariens 24 inch compact I think it's from 2010ish and haven't done any maintenance to it haven't done anything besides add gas and works like it's brand new and it goes through some of the heaviest snow with ease.
Brings back memories of my 1968 Ariens that I bought used for $75 in 2000. I had it for nine years and the electric start burned up when I was starting it. I was not able to start it without the electric start due to a back problem. I gave it to a friend and he still has it. I always said it had one safety feature ... it held a held about a quart of gas and when that ran out it stopped. Otherwise you could chew up the neighbor's cat or dog, sticks, or, I once had feathers come out as there was a frozen bird under the snow. I hit a newspaper once and it cut it in half ... I changed the sheer pins after that experience. I replaced it with an Ariens 1130 ... it's a great machine, wider, more power but it has too many safety features for my liking. Thanks for the video and i will subscribe .
ROCK ON Irish! These old snowblowers can eat anything! Thanks for sharing!
Great video as always, my dad had the exact same Ariens when I was little, I am 53 now and can remember him engaging those drive and auger handles. They definitely don't make them like they used to, everything is cables now that break instead of hard linkage.
Good teaser on the repower, I watched a lot of snow blower repower videos on here using Predator engines and it seems to work out good. I will look forward to your future videos working on this Beast.
Put the new engine on and it eats it right up now! This is thing is an animal! Stay tuned my friend!
The only issue I've had with Predators is the fuel lines rotting out in no time, a simple cheap fix.
@@josephrobichaud5198 if that is the case and they do rot for one reason or another they are an easy fix! Thanks for sharing!
@@GarageGear Small Engines should be running ethanol-free gas ideally. There is an app called Pure Gas, it will tell you where the ethanol free stuff is in your area.
@@chrispixx thanks for sharing a that app Chris!
I have a 1966 like yours, mine has painted handlebars, it came with a 4 hp Tecumseh, I replaced with a 5 hp 30 years ago. I bought it from my neighbor Augie a bit before he passed on. I have the original receipt from when he bought it in 1966, he paid $252.35. It has served me well, tough as heck!
Can’t beat these machines! Thanks for watching Andy!
I have an even older unit I inherited from my father. Back when my brother and I were much younger we would set it up and throw pine cones and acorns at it and watch it launch then 2 back yards away. It’s a 1954! It originally had a 5 hp engine, I upgraded to a 10hp snow king. Looks very much like yours. I only pull it out on the really big storm but I also love this machine
If you like I’ll upload photos
Hey David! That’s a huge engine upgrade! Feel free to email me a pic when you have a moment! Thanks for sharing!
@@GarageGear what’s your email so I can send photos
@@davids9375 my email is garagegearjb@gmail.com
@@GarageGear I sent photos, just wondering if you seen them
A friend gave me one today i believe its a 1963 10ML60D i'm doing research on it and came across tour video which was very good and helpful. I got it really running nice now i have to fix the flat and do some restoration. Its in really good shape like yours . It will be a fun little project its actually 5 years older than me . I like the predators for the swap i may do that with the 212 . The blower was free so i can restore it complete for under $200 if i do the swap .
@@williamthurston5003 very cool William definitely check out the predator engine! 👍
Awesome machine and what incredible condition it's in! The 1st Ariens snowblower I ever owned was that exact model. Bought it back in '96 with a blown connecting rod in the engine for $75. Repowered it with a brand new Tecumseh 8hp engine. Was into the machine for around $400 total. I used it for 6 years, made some money with it, and then sold it for $500. Wish I still had it 😭😂🤣. I'm very much looking forward to following the build, can't wait for the next episode!👍
Very cool history on your past machine Smallblock! I like the fact that these are solid metal! Plenty to do on this thing! Thanks for being a cool fan as always bud!
@@GarageGear should I buy a ariens 504 24 "5 hp older model for 250 cash or a newer craftsman 24" 7hp for 400 cash?
@@daviddave8266 good question David! I would have to say the older ariens would outlive the newer craftsman! I would lean toward the ariens! Thanks for watching!
50 yrs ago I was renting a room an 1/8th mile back off a country road. That was the year we got 200" of snow. The apartment owner bought an Ariens rear tine rototiller and an Ariens 10HP (Briggs) two stage snow blower. I swear that was the best snow blower was the best I ever used. Eventually she hired a farmer with an 4' x 8' twin fan snow blower hooked to the back of his tractor. But loved that snow blower.
Great machine my friend! Can’t go wrong with an ariens! Thanks for watching another bud!
Love the videos JB! Keep ‘‘em coming on this Sno Thro. Just picked up an identical 1970 7hp as well this past summer and it has performed amazingly for me all winter long. I am in love with these machines, as someone who was a big fan of the 70s in general. I am too thinking I will eventually do the predator 212 swap on it myself, as well as the obvious impeller mod. Love the in depth video! And very jealous of all of the original paperwork with the machine
The new engine is definitely the way to go! No fighting with it to start it. First pull and BANG! I have the impeller kit planned for the coming weeks. Stay tuned my friend! Plenty more fun to be had with this thing! My hopes are that these videos help some out there that like you are planning on swapping the engine!
I just picked up a 1973 model, almost like yours for $50 and I have the same plans as you.
I am going to restore it.
I'm just not sold on those mass produced MTD machines.
I had several over the years and if I had one of these all my 40+ years of owning one, I'd still have it today!
Thanks for the vid
Awesome my friend! Your gonna have fun with that project! Congrats on your purchase! Thanks for watching!
You can tell it was well taken care of because the chrome on the handlebars looks great. The Turf Saver tires+chains work ok, but you'd enjoy using it more if it had a set of modern snowblower tires like Snow Hogs or X-Tracs.
I’m looking into x tracs on it! Those tires work out great and last a while! Thanks for watching db!
I had one of that vintage with the 11hp and I believe it was 30" opening. I was snow-blowing my long paved driveway one night after work and on the way out lost a tire chain and didn't realize it. i found it on the way back. What a noise! Stopped it dead and bent something in there. I finished out the winter with the handlebars shaking like an old Harley. I sold it for parts in the spring. I wish I still had it.
Oh wow bummer it wasn’t repairable! Thanks for sharing!
I still have my 1975 Toro 8/32 that I bought brand new and it is in excellent original condition and my 2005 11/24 Ariens pro that I bought new. The older ones are definitely built out of heavier materials.
Thanks for sharing Thomas! I have a feeling I’ll have this one around for a long time! 👍
I had a slightly newer 724. It had a plastic gas tank. That single belt blower would walk circles around my current 80's dual belt 724. I had a customer who had a steep driveway with about a foot of heavy wet snow. As I started the machine was blowing. Then it bogged and clogged. I kept digging. It literally fired the plug like a cannon and kept on trucking. The guy next door unclogging his old Toro was amazed. He said to me "That's one hell of a machine!". I replied "Nothing beats an Ariens!" I miss that machine!
Thanks for sharing M! I bet you could still find another if you searched around lol! Thanks for watching!
Love the vid. One comment:
I can only imagine what your neighbors think when they glance out and see you shoveling snow on to your driveway!
Hahahahaha one woman who walks by all the time, looked at me and said, “are you losing you’re mind?” I told her it was all for UA-cam lol! Another was like, “you’re doing it wrong…!” I get all kinds of looks on my corner lol! Thanks for being a cool fan Mark!
I have an 83 Noma Canadiana I picked up for free in the summer, it had a sign on it "needs a fuel pump" lol, there is no fuel pump so I assumed it was a blockage in the fuel cup or the fuel line needed replacing, and that's exactly what it was, a $4 fuel line and 2 new clamps. I put my White away that I paid $1100 for 8 yrs ago and is the back up now. The 27" 8hp Noma is a beast and weighs what feels like 200 lbs, only thing I don't like much is the auger doesn't lock with the drive so you have to 2 hand the controls which tires out your hand after 20 mins, vs my new one that locks, love that it has a throttle to slow it down or speed it up for wet heavy stuff. All metal chute and hasn't got any rust yet.
What a find!! Thanks for sharing!
Those old tecumsehs can be quite finicky. But, they are good engines. However you hit the nail on the head, once they get to a certain age/wear point, they are beyond just regular maintenance and would need a complete overhaul. But being that it’s so old, I’d look for another tecumseh to put on that machine. Just to keep it true to the original build. Even if it’s a larger engine, just to keep it closer to original
I like that idea but I already popped a predator on there and it’s rocking! My friend wants that tecumseh. He’s got a real talent with them! Far better than me! Like your way of thinking tho!
Hey friend, I have a 1972 6hp model. Its a beast and always starts. Got it in 1998 from a old lady with the brochure ,parts manual and receipt for $600.00 . I paid $150 and I've always said i wont buy a new one for reasons you explained. Just this year I'm gonna have to do carb work. Mine was bogging this year as well in high snow but only for about the first 20 minutes. Never used to do that. Pretty sure that would be carb.
Sounds like a carb clean is in your future! Should run good as new when you’re done. Thanks for watching!
I inherited a 45 year old 22" 5 HP Ariens that still works great. It has been used on snowfalls of up to 32".
Oh awesome that it can handle that much snow! Thanks again for sharing Ron!
I have this exact machine in my garage. The only difference is, my electric start sits on top of the engine. To start mine, I turn on the choke, hit the primer 5-6 times, it almost always starts on the 2nd pull. Once running turn off the choke and go to work. I do have a new Ariens on the way. I plan to tune/clean this one up and sell it next fall.
Thanks for sharing tim! 👍
I also own and reliably use the same machine since 2006. I'm the 3rd owner. It's a beast!
Awesome Tammy! These are awesome machines! 👍
🙂I've got a 1974 Ariens 824. Inherited it from my father around 1994 that he bought it new in 1974. The 8HP Tecumseh engine is nearly unstoppable. If there's room for the snow to go
somewhere after it leaves the chute, the engine won't stall, even in wet slushy snow. It's all original except a carb rebuild I did around 2005. Yah, it's difficult to start with the recoil start unless the engine is warm. I love this thing. You're right, the new snow blowers are built pretty lightly compared to these. I'll die before this thing will. And I'm older than this blower.
Thanks for sharing the history of your blower David! 👍
I've got a 1978 ariens, that im currently doing a repower ok it. Great machine you got and great video thanks for sharing.
Thanks Eric! The mods have already begun on this thing! Stay tuned!
I like the heavy old stuff... I rehabbed a free Noma snowblower of uncertain vintage but likely from the 70s. That thing is a beast compared to blowers half it's age or less that I've used. Those blowers carried MTD, Troy Built and Yard Machine branding... I treated it as a project to restore function and was less concerned with cosmetics. I gave it a valve job as the exhaust valve was sticking badly, new skids, NOS chute, shear pins, head gasket, belts, fuel line, a tire tube, and a sparkplug. The rest was my labor, some miscellaneous bolts, and lubricants. It was a fun project and I've got a comparative beast of a machine. I will probably only need it 1-2 hours, a half dozen or fewer times per year, so it could last for another 20+ years. 🤞
That’s awesome! Love hearing about freebies being restored! Thanks for sharing!
I own 6 Toro 20 Snow hounds from 1964 & 1965 I have re - ring them and they all run like a stripped ass ape a few years ago I was doing my side walk it hit a pop can and threw it 25ft or better into my neighbor window.. ran it for about hour on about a 1/8 of a tank of gas a monster.!!
Hahahaha that’s awesome my friend! The older ones are animals!
I have a 1966 Ariens snowblower with original engine. I had it plus 20 years. Easy to fix for me been a mechanic all my life. Install a pedal kit on blower fan and new tires long time ago. Never need chains with the new tires. This blower works great. Small amount of rust but still in very good shape for being 57 years old. Parts are still available from dealers. I bought extra belts and bushings and springs and clutch to keep this blower going for many years to come. Starts first pull or electric start as soon as you hit the button. I also have the parts and owner manuals. If the engine ever gives up I will probably put a Honda engine on it. But until then I will just keep blowing winter away. On your machine you have probably swap the engine but the carburetor would have been easy to fix.
Thanks for sharing Dc! The old stuff is the way to go! 👍
Nice find JB! Looking forward to seeing that rebuild your gonna do! I’ve had my 99 Troybuilt, right after they bought out Bowlens, and that think is a beast! It’s the 8/24 did my whole driveway when we had that 7 feet of snow a few years back. Still runs great! Cheers!
Those were great models too! Troy bilt really cheaped out in recent years! Love seeing older models taken care of and still tackling snow! 👍
My son in law had a 1970 snow thro given to him in Toronto, he did not need it and gave it to me. The 5 hp Tecumseh motor runs great. I cleaned the carb, made an air filter for it, changed the oil and put fresh gas in it. Started 3rd pull. It will eat the whole auger full of snow with hardly a whimper and ask for more. Antiques are great, this machine has found a home for life.
Very cool! Thanks for sharing Wendell!
I have a 1997 Simplicity 2 stage snowblower. Always starts, 22 inches wide.
Awesome! Thanks for sharing Shane! 👍
That is BEAUTIFUL.. My lord it is in excellent shape. They sure don't make anything today like they use to. It's a shame, they use to build machines like tanks. Crazy thing is companies just send them out built like shit they don't care about customers like they use to.. Thank you so much for sharing this. Can't wait to see what you've got planned for it
Next video is all about tearing the engine off! Stay tuned! 👍
@@GarageGear awesome!!! Glad I found your channel. It would be really cool if you were able to keep the whole unit stock. I understand tho I wouldn't be worth the time or trouble to rebuild the engine. I'm super stoked, can't wait!!!!
@@garyalensr it would be cool but there’s a lot more fun to be had with some new mods! Glad you found the channel!
Wow !! I have one exactly like yours. I got it from Craigs List in 2009 or 2010. The only things I have done to it is rebuilt the carb., new rubber for the transmission, new plastic gas tank, and bought a used carb. box for in front of the carb.. Oh yeah, replaced the spark plug. It doesn't throw the snow as far as the newer ones do but it throws it far enough for me. I also don't have all the books on it like you do but I wish I did. I don't have an electric starter but it always starts on the first or second pull, even the first start of the season. I love this monster. I love your video's and watch them all.
Awesome Walkman! Very cool you have one too! Thanks for being a cool fan of the channel!
Fellow Buffalo guy here! I recently found this channel it’s amazing!! Great content and lots to learn. Looking forward to the upgrade videos to this.
AWESOME NICK! plenty more to come! Stay tuned! Go BILLS!
Reminds about the Amf snowblower we had when I was growing up, that machine was a beast compares to nothing that is made today. Great video keep safe and keep them coming.
You got it njh! Thanks for watching!
I have almost the exact same model that my Grandfather gave me when he passed away 2 years ago. I have a really small driveway and don't really need a snowblower, but I love having it especially when we get a huge dump of snow. I do have a small problem. When the snowblower is running you have to keep the choke on about 1/4 or the engine will stall. Does it need a new carb? Either than that, it runs great and always starts even at -30 C The model number on the motor is H70-130177A. Thanks!
Hey Robert! I imagine you may just need a carb cleaning and not a new carb but given it’s age anything could happen lol. Hold onto that thing! They don’t make them like they used to. Thanks for watching!
JB, what a great find. Can’t wait to see the upcoming videos on this. Btw, my 1994 Ariens 824 (that I still use today) points backwards but only when cranked to the left. I always felt like that mine was built like a tank. Definitely don’t make them like that now.
Hey David! Sure was an Awesome find! Plenty of content coming up on this! And they definitely don’t make them like this anymore. Stay tuned my friend!
They don't make them like that anymore, surely for some sort of safety reason, but on the current Ariens Deluxe models with the auger style crank you can do an easy modification to allow it.
My father had 1 he bought brand new It's around 42 years old still runs and does not smoke at all. He still had the original paperwork and the snow chains they have never been used. It's never been off the pavement sense he bought it! The only time it's been out of the garage was while it was in use. He is anal about upkeep on any and everything he owns my grandfather was the same way. Now it's ours. The starter popped loose. 4 heliciols and some lock tight later. The beast lives again! Got a fuel leak to fix and she needs a breather.
Hey Dwayne and Tina! Sounds like that machine was very well taken care! And withe a few minor fixes here and there you’ll be good to go for winter. Thanks for sharing!
I own and currently use the same exact snow blower..... its a beast
Awesome Aaron! The mods have already begun n mine lol! They are animals!
@@GarageGear gonna follow this. And agree the tecumseh has its limits. If there is heavy slush it can still clog the thrower. I run her either on 1 or 2. I never hit 3 due to the hill of the driveway I have. The throw over angle helps me tons
I have a 1962, 9000 series 24 inch Ariens still going strong today! Living in the mountains, we get dumps of snow that only my Ariens can handle. I am the 2nd owner and I have replaced the original 7 hp with a Powerfist 7 hp and nothing can touch it! Koodoos to you on your purchase, keep it forever!
Hey Barney! Awesome that you have one as well! These snowblowers are so well built! Planning on keeping my forever! Thanks for watching!
Most likely, theres nothing wrong with the engine. Asimple tune up and carb clean and it will run great. You cannot expect a 7 horsepower machine to enjoy eating up a hege pile. My 10 horse has trouble with snow over 18 inches high. You just back off a bit or go somewhat slower. Also, check the gasket between the carb and block, it could be dried up.
I’ll let my buddy have it! He has a thing for these engines! Thanks for watching!
I have the 824 Ariens of this era. What a tank! The thing is AWESOME and only paid $80 for it. The best way to start these old battle axes is to pump the primer until you see fuel drip from the carb, full choke and probably two pulls although mine usually starts on the first pull. I have buried it in snow deeper than it is tall, no problem. Snowplow windows of packed ice and snow that cover the front bumper of my Jeep Wrangler, no problem. Now I'm looking for the 1032 from the same era. I like my Ariens so much I named it Frosty.
Good name for it! Thanks for sharing and watching Dale!
I have an st824 and st1032. The st1032 is HUGE.
Try ceramic coating to avoid sticking
Thanks for watching!
I use PB Blaster Dry Teflon inside my chutes and impellers between rounds after I wash the crud out and dry them. I also coat my entire machines in it before I cover them for the summer. Then I just wipe them down in the fall.
Most of these 1960s- 1970s machines have no safety shut off.
I have known about users' loss their fingers and limbs back then.
Very cool. Definitely reenactment of that picture is in order. I remember those machines with the auger running at all times. Sounded like a tank or a violent death coming at you. If you listen carefully you can still hear the profanity from the past hanging in the air on those subzero February northern Chicago nights from guys attempting to start these machines. Great memories
Ahahahaha profanity in the air lol! That’s hilarious! With the new engine that won’t be happening lol! I remember my dad having a go at one of these a while back too lol! 😂
That tecumseh engine probably needs a rebuild and or valve job.
I agree! To me it’s not worth the time/money. Rather would swap it and get some serious power! Thanks for watching!
A few years ago my dad (now 83 years old) gave me his 1991 Simplicity with a Tecumseh engine because it would die after running for twenty minutes and he bought a new Ariens with electric start and a headlight. I fixed the Simplicity and I have been using it every winter and I do a full maintenance every spring. I keep thinking about buying a new snowblower but after watching your video I think that I will stick with my 32 year old hand-me-down Simplicity.
Can’t beat the old ones nutfield! Thanks for sharing! 👍
AMAZING find!! looking forward to these videos!!!
I know right! I feel I’m lucky I’m the guy that got to it first! Engine tear off is next week! Stay tuned my friend!
Awesome piece, I collect any I see, I only run 1 but grab parts machines. I have multiple 24” and 1 32” auger. Power upgrade is in the works. Best machine I’ve had, nothing I see today for sale matches it’s heavy materials. For safety how about a simple tether cord to the ignition cut out. At least if you go down it won’t drive over pets,children or circle back and get you! Bigger tires! I’ll miss those floppy chains though😔
Hey Jim! I like the cut off switch idea! I just put bigger tires on mine. My chains were worn down pretty good and the old tires didn’t hold air well. Thanks for sharing my friend!
Previous owner is going to be pissed that you`re putting a new engine on that but it`s yours now so.......
I told him my plans. He didn’t seem upset. He was happy it was going to be taken care of! Thanks for watching!
I had one almost identical to that one and loved it. The fuel tank is plastic and held on with bracket and not straps. Still have the motor and some of the parts like the chute. It was built super tough and very simple to use. As you show no safety features at all. Would run you down and worse. Also always used the electric start. Great video enjoyed seeing it for sure.
Awesome Rogo! These machines are one of a kind! Appreciate the positive feedback!
I have a 71 Ariens with a Tecumseh HSK70 engine that runs great now. I originally bought 2 machines and put the best parts together. Replaced most of the bearings which were worn, found some old stock hubs to replace the ones with worn keyways, and just did alot of cleaning. Original paint is in really good condition especially for over 50yrs old, the only bad spots are inside the chute and bucket that looks worn away so I just sprayed those areas with chassis and roll bar paint for now to get me through winter then I'll paint with color match in spring. The Tecumseh engine runs so good I took off the electric starter it's not needed.
Awesome Tim! Thanks for sharing! 👍
I'm the proud owner of an St1136. Been throwing norther Norwegian snow for 40 years. She's a beast . Original 11hp B&S starts every season after two pulls. Was considering a new machine this year, but if it ain't broke...don't fix it. Thanks for the fun upload.
Thanks for sharing! 👍
Can you imagine in the old days.... actually having a snow blower... yes, dangerous.... but HAVING A SNOWBLOWER to help do all the work. Amazing....
Prett incredible right???!!! Thanks for watching
In 1971 my father's snowblower was me and a shovel. Even in 1977 I was still shoveling. I think he bought his first Ariens in '78 when I started college.
My friends dad was the same way Charlie! Then we had to dig him during a 4’ snow storm with our blower. Then he went and bought one a week later lol. Thanks for watching bud!
I’ve got the john deere version of that snowblower. Mid 70s I think. Had to rebuild the auger gear box and I got the parts from john deere last year. Repowered it with a 11 hp honda and the thing is a beast.
11hp Honda! That’s awesome! Thanks for sharing Don!
@@GarageGear I’ll just add its a 832. well actually its now a 1132.
@@donziperk that’s really cool! Email me a pic when you have a moment! Thanks!
I had several of those Ariens. My first one was a rusty mid to late 60's model that I got for free from a friend's shed clean out. The bucket was bad on that one, so I found a same cleaner Ariens for cheap which I swapped the motor from the old one on. The carb is getting tired after a rebuild over 10 plus years ago, so I bought a new 13 dollar replacement to install. I had a 1971 8hp Ariens with the controls on the bars which worked much better, but I still like the simplicity of the basic ones with the auger clutch on the side with just one belt. As far as auger gearbox strength I have experience with that since a tomato tower got wrapped up in my first one. It took me awhile to get it unwrapped from the auger shaft, but the gearbox was unscathed. Yes they are nimble which is nice, but that could also be annoying at times considering the lighter weight in front makes the machine roll over packed snow. Yes unsafe, but if you are not an idiot they can be safe. I always spray down my bucket with silicone spray, or rust penetrant to prevent the snow from sticking before each use
Thanks for sharing craig
That is too cool....I got my 81 White Outdoor Products Snow Boss trac drive running....I got the machine for $50 bucks....put a new carb on the 8hp tecumseh and it fired right up.....But I have no throttle control....It's either beyond wide open (over rev) or off....I think I narrowed it down to the actual throttle lever....I opened up the old carb just for fun and it had a sand like substance and sludge in it and the float is seized....it's going in the trash.....when it warms up some I will tinker with it more.....I have been throwing around the idea of a predator engine swap as you are doing.....good to know I am not the only one obsessed with snow blowers....Old and new....I am looking forward to seeing what you do with your New (to you) Vintage Ariens....My original plan was to just fix and flip it....But I don't think I can part with it....Trac drive snow blowers are just too cool.
Trac drives are awesome! The predator swap will be out in a few weeks! Super easy to do! Stay tuned my friend!
Thanks I love it. I have a 22 year old snow throw made by toro 6 hp. Runs it’s built like a tank. Needs some TLC. I’m doing my best in getting it to run. Got it going it ran two hours n next day wouldn’t start.
Any tips.
Hey John sounds like a possible carburetor issue. Especially since it will start and then not start. Give it a cleaning and let me know if that straightens it out!
Where do you suggest I buy the float gasket on line or in a toro /Ariens store local place.
@@johnhouli3450 I usually have more luck on ereplacementparts.com for older models. You won’t find parts for machine that old locally unless you go to a repair shop.
My brother in law loves his old Ariens snowblower. It was his dad's from the 70s. My dad tuned it up for him a few years ago so it's going to last another 20 at least.
Sure will Gord! Thanks for sharing!
I garbage picked an early 60's Ariens 6 horse with a blown engine 20 years ago, replaced all the bushings and bearings, mounted a used 7 horse and ran it to death. Bought an 8 horse and now it throws snow as good as my new Ariens heavy duty machine
@@davezale3309 WOW! Keep her going my friend! 👍👍
Love the old paperwork. Not a surprise that they saved that, when you look at how well taken care of the machine is.
I don't know what the method was to make the old photographs so much easier to see. More recent manuals with black and white have so much darkness and indistinct details that make it hard to see the parts. Many old books and manuals from before 1960 have been worked on to a half photograph, half drawing look, which is much better to illustrate what we need to see.
Hey grey one! These old manuals are timeless and one of a kind! I’m considering framing them lol! Thanks for watching!
Just ran across your vid and a neighbor was throwing out a late sixties toro snow hound single stage fifteen years ago. It is chain driven (no. 35) and has the same thickness auger and with no safety controls at all, so when its engaged for travel it goes. The engine is pull start only and will not start except with a prime or starting fluid and I live on a hill and if I fall it will pull me down the easily. No shear pins and when I hit a curb it just bent the master link and spit the chain out. One time we had a light snow fall about 4 inches and then it rained putting a crest on top of it. The snow hound cut right threw it while the neighbors machine was riding on top of the snow pack.hahahahahahaha
@@josephryan6593 older machines can cut through just about anything.
Man, I’m so actually relieved I found this.. A couple of months ago I bought a old 1960s yard man snowbird and it appears to have VERY similar controls to this one, and I really had no idea how to even attempt to fire it up. Now I have a better idea of what I’m doing
Hey Tanner! Those old engines can be a chore nowadays to get started. Cool technology for its time though! Thanks for watching!
I had one / snowbird I bought with shoveling money when I was 14 in 1978 it was old then 8hp Briggs picture of a bird scooping snow in its mouth I think it was wearing a checkered hat .that thing kicked butt just as good as any ariens I've owned
My dad bought one of these in the mid ‘70’s. It was a beast and was still running decades later. As a kid, it sure made clearing snow lots of fun. 😅
Awesome my friend! Wait until you see the refurb I do on this machine this summer!
Just inhereted one of these Model # 910962 and it needed a little work but it started and runs great. One thing left to fix is the gear linkage. It was backed into so the handle was bent and I am hoping that filing this will make the shifter work better again.
Sounds like a sweet deal and plan, my friend. Thanks for sharing!
Really liked this video (and the others you've done on this project). Now you have me rethinking whether I want to get a new (or slightly used) Ariens or look for an older model like this one. Any tips on what to look for when purchasing an older used machine like this? Thanks.
Hey Bill! Ariens makes a great machine. Even ones that are just a few years old can be a great buy! Summer is a great time to get them cheap! Aside from cosmetics on an older machine a couple things to check include the augers to make sure their spinning as they should with no grinding noise from the gear box. Check the transmission to make sure it shifts okay. And make sure the engine is a single driveshaft and not a double. This way you can swap the engine easily. Keep me posted if you find anything good!
@@GarageGear
One other question about finding Ann older Ariens. Just wondering what year I should look for. When did they start using thinner metal for the housing, augers, chite, etc.and using cables in place of solid rods. Thanks.
@@billbarr3644 I’m pretty sure the rods were on them through the 70’s and 80’s. Thinner metal started around late 90’s and early 2000’s I think but I could be wrong. Hope this helps. If you have any other questions give me a shout!
I had a '74 unit that my dad bought new, but only 4 hp. did not work well. I like the newer models, 8 hp, chute distance control from handle, big tires, auto turn, a light, electric start, 2 spd reverse, 14" impeller. Much more comfortable to operate. But even with all that, for some reason i can't junk the old one!
Thanks for sharing William!
Loved my 1963 Ariens 10ML60 snowblower, hate that I sold it. It just cut right thru the Buffalo Snow. Thanks for the history on it and Go Bills!
You got it count! Thanks for watching! Go bills!!!
Mine might be 30-ish years old, but runs like a tank.
Yup, there ARE major safety issues (natural selection?) with them, but it runs well & strong.
Mine is way overdue for a tune up.
Electric start to begin the day, but after it is warmed up. If it (or I) run out of gas, starts pretty easily.
At 74 years of age, (me), it is a workout. But I can take breaks if I need to.
Driveway, walk, (except for 2 steps that it can't make up without some wrestling & body slamming), plus a few paths around the house for the dogs, & one for the oil delivery from the road to the back of the house.
Has done me well for the about 10 years that I've owned it.
Oh, and when I shovel steps, I can the auger running & throw the snow into the beast. It eats & throws the snow away.
AHHH!
THE GOOD OL' DAYS!
Hahaha natural selection!!! These blowers sure were from the good old days! Thanks for sharing bud!
Great video! I picked up a 1971 5 hp version of this snow throw a few years ago in similar amazing shape. It is a tank. However I don't have all the paperwork yours came with. Would it be possible to scan and make those manuals etc. available as a PDF? That would be great. Also, are you documenting the repower project? That would be fun to read about.
Thanks for the positive feedback. I don’t have a way to scan those papers at the moment. I did shoot several other videos on this snowblower repower project in the playlist this videos is in! Check them out! 👍👍
Love my Ariens. I actually have 2. Mine are even older then yours. Only one works since the gears in the gear box are stripped so the auger is useless. (any ideas on how to replace the gears and where to get them?) Also, I can't seem to find what oil to use in the gear box. My search has come up with so many different answers I am even more confused then before I started. Any help?
Hey Anthony not sure where to get the augers but I read that Ariens MP90 oil is the way to go for these older gear boxes. I’ll be doing a video on this in the future here! Stay tuned!
I have a 1973 John Deere 726 , very similar to this snowblower . It burns a little oil but I get the job done ! These were built in a time to last for decades not todays garbage .
💯agree my friend!
Gosh ...Back and forth...I forgot to say...I have the exact same thrower in this Video, But it now has a 8hp. Snow King on it.
I am gonna try the Impeller Kit, (This spring) ie. rubber swipers as/per other video you did... can,t wait!
Awesome Mitch! I’ll be doing an impeller kit on this as well very soon! Stay tuned!
My daughter bought me a wool sweater like that a few years ago and it really is warm and comfortable. A lifetime investment like the Ariens. I will be wearing it when they carry me out.
Ha awesome my friend! I’m still on the hunt for one! Thanks for watching!
Autopilot snow blower? That’s next level engineering from that 70’s ariens. But this snow thrower is a testament that they don’t make things like they used to.
They don’t make things like they used to! Thanks for watching pdubya!
My 22 year old Ariens has been pretty good as well - only had to replace the electric start. Although, after watching your pieces on belts and friction disc, I realized mine are 22 years old! Time to look at them, I think....
Probably good to give them a look and at least lubricate them! Thanks for watching Barry!
Hi, JB. I know this post is old and you likely will not see this, but your passion made me subscribe and comment. Your Ariens does look great and is a powerhouse. However, do you advise whether an engine replace would be worth it, when the time comes? Your use of lubes and silicone are essential- I use my original 1978 Craftsman Eager, 5hp/21” blower still today. It still pull starts,
as a plus, all original except for the plug.Nothing else replaced, but I did have to weld one of the auger blades together. Another plus, my model has no belts -and is all chain driven, plus tire chains. It has a similar blower chute 6” diameter, and throws snow 20’ rooster tail high in the air😄
Hey my friend! Does it have a dual belt pulley? Some of those smaller engines had them and would make a belt swap very tough to do! Single pulleys are no problem! Let me know why you have! Thanks for watching
@@GarageGear - Thanks. Pulleys and all drive axles and gears are with chains. Looks like a 6 hp Tecumseh. I bought new in 1978, after the blizzard. You do all the same lubes and surface prep I do since I have had mine. It can really throw the snow= but as I said, I have had to weld one of the auger blades, and wondered if it is time to switch. The engine sounds very healthy.
@@Nick-dh4gm if the engine is healthy I would keep it going. A predator with one pulley would most likely be a complicated switch. Sounds like your model is iron clad!
JB: When you see a blower like this and it has chrome plated handles and an auger gearbox the size of a Model T rear differential....you know you just landed a keeper. Great vid!
Right On Frank! Thanks for watching
@@GarageGearAlways my pleasure JB and keep 'em coming.
@@frankcastle5294 you got it my friend
I bought a used 1972 one just like it (without the electric start ) and used it from 1993 until 2008 when I replaced it with a 2006 24" Ariens 11 hp Professional.
What a sweet machine.
Sounds like an awesome machine! Would like to get my hands on that! Thanks for watching!
My 1969 4HP Ariens SnowThrower has been a true champ. It just works and, most importantly, reliably. It always starts on either the first or second pull on the cord. Best of all, it does not all the dubious "enhancements" that now clutter newer machines and make them less reliable.
The old stuff just works! Thanks for watching!
Love it. It's great to see to fix it up and keep it out of landfill!
My 1988 8‐HP MTD Tecumseh has held up well.
The delicate plastic snow chute (relpaced once @ $106) is a disgrace!
What do you plan to do with the augers?
Great video like all your videos! You are making me appreciate though my Ariens EFI 24 inch machine. It’s quite a beast. 2 years old! Would not want to deal with engine issues. No authorized service centers in So Cal mountain areas.
Hey Rick! Appreciate the positive feedback! You’re gonna have that ariens for a very long time! 👍
@@GarageGear the production values in your videos are quite high and enjoyable to watch. What a garage you have! Do you think the electronic fuel injection units are good? Runs and starts great. Saved up for 18 months before getting it.
@@rick3301958 glad you’re enjoying the content my friend! The EFI engines are great! Would like to be use one myself. Perhaps this season we’ll see! 👍
Another great video Jb, My one Ariens Snowblower I bought has the 5hp Tecumseh Engine On it, my brother in law was saying I should get a Preditor 420 CC engine From Harbor Freight to put on it and throw the snow across the Street lol Then I have another Snow blower Thats a craftsman 9Hp 28 Clearance, Had to Order Points and condensor for the Ariens and Had to order a Friction Disc for the Craftsman
Thanks Dave! Sounds like you have some projects on your hands! Which blower do you like more?
@@GarageGear I use the Craftsman more, Shed is only big enough for one of them so the Ariens is under a tarp I know I know It shouldnt be
@@GarageGear Was also going to say If your garage is not heated I found A Pretty Darn good Space heater at Big Lots, Heats up to 1000 Square Feet and its only 49.99 Its what I'm using for my shed lol
@@DjDaveVoom you gotta do what you gotta do.
@@DjDaveVoom thanks for the space heater tip but I actually have a propane heater that does a decent job. Perhaps some day I’ll fully hear that garage.
I have a 70s Bobcat Snow Blower that will blow wet heavy snow up to the power lines.
Not very ergonomic though. And really deep stuff is a pain - It will "tunnel" into the snow.
Bought a new Troy Built.
It takes 60% more HP to do the same thing. My hands are warm though... Oh and it doesn't mind 2' snow. Still have the Bobcat...
Thanks for sharing Dan! How big is the bobcat blower?
@@GarageGear 24" 6hp
@@danmayes4657 those old ones got some power!
New subscriber here! Thanks for this vid! Really makes me happy seeing someone who cares about the old iron as much as myself on here! I have a similar story to that with a 1980 Yardman Snowbird 11-33 B&S! All original and I done a complete tear down to nuts an bolts rebuild of every piece and rebuilt it over 2021 back to show room condition and put some really cool add ons on it as well that really makes it a treat!! It’s definitely a tank and I’m happy that’s it’s with me! Looking forward to your build here! And YES I vote the recreation of that Ariens pic with the Xmas sweater! 👍👍👍. Again thanks for this! I really enjoyed the video an the back story as well! A great back story makes any piece of equipment all the more valuable I feel :)). Cheers!
Hey Abew! Thanks for checking out the channel! I have a lot of respect for the old stuff! Got some more videos coming on this old gem! Still looking for that sweater too! Thanks for watching!