I'm using the RFID Card Password Access Control Machine For Door Lock. The problem that I'm facing with this unit is that whenever I restart the access control or it looses power & then gets power back is that instead of going to the "Standby state" (Blue light flashing every 1 sec / Slow flash), it goes to "Pending further action" (Green light flashing every 0.5 sec / fast flash). I'm using the terms "Standby state" & "Pending further action" from the manual that I got with the unit. When the access control is in this state whatever button I press it just makes an input beep but the green light keeps on fast flashing. During this state I can't enter the programming state. The only way to bypass this is by performing these actions: 1. get a card/tag near its rfid area & it beeps once (stating that its a valid input), but the "Pending further action" fast flash green light will still be on. 2. read the card/tag again & it beeps twice (stating that its an invalid input), but now the access control enters the "Standby state" slow flash blue light. Now I can unlock the door lock either by a registered card/tag or common password. So is there anyway to solve this? How can I change the "Pending further action" fast flash green at the power up to "Standby state" slow flash blue.
Could you please upload and/or link to the English manual included for this product?
Thank you!
Could yor please upload and/or link to the Portugues manual inncluded for this product ? Thank you
We don't have, please check with the manufacturer. The product comes with printed English manual only. You can use Google Translate.
I'm using the RFID Card Password Access Control Machine For Door Lock.
The problem that I'm facing with this unit is that whenever I restart the access control or it looses power & then gets power back is that instead of going to the "Standby state" (Blue light flashing every 1 sec / Slow flash), it goes to "Pending further action" (Green light flashing every 0.5 sec / fast flash). I'm using the terms "Standby state" & "Pending further action" from the manual that I got with the unit. When the access control is in this state whatever button I press it just makes an input beep but the green light keeps on fast flashing. During this state I can't enter the programming state.
The only way to bypass this is by performing these actions:
1. get a card/tag near its rfid area & it beeps once (stating that its a valid input), but the "Pending further action" fast flash green light will still be on.
2. read the card/tag again & it beeps twice (stating that its an invalid input), but now the access control enters the "Standby state" slow flash blue light.
Now I can unlock the door lock either by a registered card/tag or common password.
So is there anyway to solve this? How can I change the "Pending further action" fast flash green at the power up to "Standby state" slow flash blue.
Can you also open cars and other things with this device?
işyerimde bu üründen var ama atanan şifreyi değiştiremiyoruz şifreyi nasıl değiştirebileceğimizi biliyor musunuz?
What does this device do precisly? Is it to secure your own phone or hack passwords from other phones? And locks that wwork on (wifi)locks?
Please Help how do you factory reset?
does this keypad have some sort of anti tamper device, like a switch that detects when the keypad is opened?
Can it uses standard 12v adaptor? So that relay and push botton are connected directly to RFID reader? Thanks..
Yes you can use a standard 12V adaptor.
Pop
You can choose for one of the above gifts
very good information sir thanks alot
is it possible to connect two RFID Readers in parallel?
Hello can you help me please : i have lost manual , can you send me manual instruction please ?
thank you verry much. you help me.
How to set up
Hi sir this is me from Bangalore so i am started New business so I want access control system man power can send me sir
can you please tell me the default password keico icu-121
Hello