Good intentions, but your camera is to your right side, with the bright light on your left side, so you appear to be working in shadows most of the time, making it impossible to see what you're doing.
Thanks for taking the time to upload this video. I need to replace the charging port on my remote control. Do I need to replace the hole board or can I purchase and install a new charging port. Where can I find the replacement. What is the part number for this board ? Thanks again for doing this it has been very helpful.
I havent been able to source identical ports so probably board. Unless u can find the actual usb port. Maybe a standard one will fi I haven't had a chance to chase one down yet. Please drop a link if you find matching one.
If anyone looking at this video knows where to source the female original micro usb that goes on the Remote Control, I damaged the one on my remote and are looking to replace it to see if I can save the remote. Thanks in Advance. @@gadgetfix8077
@@bensheppard7717 I haven't been able to find the same port. The square port dji use absolute crap. You really need to check orientation before plugin cable in. What a stupid design.
That's a good tip with the ribbon cables. But it's better to remove them at the other end, because those are connectors with levers and you can leave the glue where it is. So: 1. Carefully lift the lever at the end of the upper connectors 2. Use tweezer to pull out the ribbon cable. They have little handles where force can be applied.
very nice tear down in my opinion, I found it useful in troubleshooting a constant beeping of my controller! I have a question though mate, is there any way to repair / the spring loaded scroll wheel that controls the gimball pitch? I seem to have busted the mechanism and the spring is missing in mine :(
Lighting is wrong angle and you either need to move your head and keep the camera at current zoom or zoom out so we can see what you’re doing-I had to stop watching as most of the time, the controller is out of view.
W T F You may be a wizard at electronics. But you videography and teaching skills leave alot to be desired. I couldn't see a thing and you didn't explain what you were doing or why you were doing it On The other hand you didn't say ( ok guys ) over and over
Do u fit anttena booster if so how much uk
Good intentions, but your camera is to your right side, with the bright light on your left side, so you appear to be working in shadows most of the time, making it impossible to see what you're doing.
I want to put some sma antenna on my controller could you show how to do that
Great filming
Lmao
It’s harder to take that controller apart than my MacBook. I can’t believe how many screws. Thanks for posting.
Muchas gracias amigo, gracias a tu video pude abrir el control y reparar un joystick
Thanks for taking the time to upload this video. I need to replace the charging port on my remote control. Do I need to replace the hole board or can I purchase and install a new charging port. Where can I find the replacement. What is the part number for this board ?
Thanks again for doing this it has been very helpful.
I havent been able to source identical ports so probably board. Unless u can find the actual usb port. Maybe a standard one will fi I haven't had a chance to chase one down yet.
Please drop a link if you find matching one.
If anyone looking at this video knows where to source the female original micro usb that goes on the Remote Control, I damaged the one on my remote and are looking to replace it to see if I can save the remote.
Thanks in Advance.
@@gadgetfix8077
Did you ever get it? I have the same problem and am looking for the part and instructions
@@bensheppard7717 I haven't been able to find the same port. The square port dji use absolute crap. You really need to check orientation before plugin cable in. What a stupid design.
Yes I agree. Can I just use any micro USB port? Also, how hard is the soldering job to actually solder the port to the board? Thanks for replying.
I saw in the description that you were looking for a good matching USB port.
Wondering if you found a good one to replace it with.
No I haven't found exactly matching one.
That's a good tip with the ribbon cables. But it's better to remove them at the other end, because those are connectors with levers and you can leave the glue where it is.
So:
1. Carefully lift the lever at the end of the upper connectors
2. Use tweezer to pull out the ribbon cable. They have little handles where force can be applied.
Hi does anybody no how to replace otg port is damaged. Dji spark remote control it's the one at the bottom of the remote thanks
Hi my dji spark controller is not charging it keeps defecting can you please help
Mine too.
very nice tear down in my opinion, I found it useful in troubleshooting a constant beeping of my controller!
I have a question though mate, is there any way to repair / the spring loaded scroll wheel that controls the gimball pitch? I seem to have busted the mechanism and the spring is missing in mine :(
Except you do most of the work off camera.
Yep. Im a n00b with vids. Hopefully get better in time. Love your input thanks.
nice idea but cameras to close
will fix for next time. thanks
Not very helpful, with the bad lighting and the much of the process being done off camera
Lighting is wrong angle and you either need to move your head and keep the camera at current zoom or zoom out so we can see what you’re doing-I had to stop watching as most of the time, the controller is out of view.
Lighting is terrible, from wrong direction!
W T F
You may be a wizard at electronics. But you videography and teaching skills leave alot to be desired.
I couldn't see a thing and you didn't explain what you were doing or why you were doing it
On The other hand you didn't say ( ok guys ) over and over
Bad lighting
100%