सबसे सस्ता पार्किंग फ्लोरिंग|रफ शाहबाद स्टोन |Fitting Process | Amit Jadhav

Rough Shahabad Stone Fitting
* Also Used for Garden
* Thickness 20mm
* Rate 17-20 Rs/Sqft
* Easily Available
* Fitting Charge Labour 12-15 Rs/Sqft
* Joint Filling With Cement Mortar 1:6
* Used For Waterproofing , Parking ,Garden Design etc
* yellow and Grey Colour available
#amitjadhav #civilengineering #hometour#houseplan

[@NawaleFabricators]

Bahot bhadiya स्वस्त आणि मस्त

[@anitawalhekar2689]

फरशी लावताना सिमेंट पाणी अगोदर टाकायचे का?

[@sohelshah6271]

Sir wall pe lagane ka kya rate hai with waterproofing

[@satishmorey9807]

आपण सांगितले आहे की। सर्व खर्च 30रुपये होतो,हा कोणत्या गावातील ,भागातील rate आहे ,ते सांगाल का?

[@adeelansari7458]

tile 15Rs/sqft
labour 10/sqft
Cement and sand 20/sq.ft
sab minimum me bhi 45 Rs sqft ho raha

[@deepakpatil9902]

तुम्ही कोल्हापूर राधानगरी मध्ये काम का? कोटा स्टोन फ्लोअरिंग आणि shabadi लाडी लावायची आहे

[@basavarajhiremath9417]

Hello we also have fixed Shabhad parshi, but the cement between the parshi is coming out... please advise

[@AmitJadhavcivil]

Fill the mortar in joint(cement+sand), Press aggregate pieces in that , after this process apply second coat of cement slurry or fine sand mortar

[@basavarajhiremath9417]

@@AmitJadhavcivil thank you sir..what do you mean by aggregate pieces and slury. We did fill the first filling with cement + sand mortar and second filling with only cement. We did it in hot sun, is that the reason for the cement to come out. It is coming like paapad..

[@AmitJadhavcivil]

Curing is very important in that...
After final filling cover the surface with wet clothes..
Pressing aggregate in Mortar increases strength.we should not fill the joint with concrete.
Fill the cement at farshi (top level)

[@shahabadstone]

Hlo.sir im from Shahabad

[@AmitJadhavcivil]

So nice

[@shahabadstone]

@@AmitJadhavcivil contact us

[@dipaks463]

फरशी खाली सिमेंट पाणी टाकायचे की नाही

[@Nawale_Nilesh601]

Hm ghr pr ese fit kr skte hai kya
Cutting machine se cut hota hai kya ye

[@AmitJadhavcivil]

Trained messon se fit karna padega.... machine se cut hota hai 👍

[@Nawale_Nilesh601]

@@AmitJadhavcivil thanks

[@poojamishra-vn2dr]

700

[@sarthakfating2259]

1000sq futt kitna lena padega aur kya price hai

[@AmitJadhavcivil]

10 Brass lena padega.
Rate 1800-2000/- Per brass Padega.
With fitting Total Karcha 3500-3800/- Rs Per Brass jayega.

[@gajananvairagkar2395]

फरशी बसवताना उखळ कसे बसवून घ्यावे फराशीच्या लेव्हल ला का खाली

[@AmitJadhavcivil]

फरशी लेवलच्या खाली 3 इंच

[@Videos-mc3uc]

किती रूपये बासआहे

[@AmitJadhavcivil]

1800-2000/Rs Per Brass

[@smitamhatre8192]

​@@AmitJadhavcivil ही

[@smitamhatre8192]

​@@AmitJadhavcivil मला पाहिजे कसा ब्रास आहे. आणि घर पोच मिळेल ना