Have a very important question. When I installed the same floorboards , the right foot board ( brake pedal side ) reused screw that attaches to the bike bracket doesn’t screw all the way through . Seems the bracket slides in and doesn’t give room for the screw to go all the way in to hole to the end of the threaded hole . I have it on there tight and it’s holding . It just looks like it needs a longer screw now . Is this like yours ?
@@jaredourada Yeah.. we don't set the prices but I wish everything on earth was cheaper as well. Regretfully, post COVID the only thing we've seen is one price hike after another across our entire product line. Plastic, Electronic Chips, Steel & Aluminum are on the rise. There's been a 700% increase in shipping container costs. The country was shut down to some degree for over a year and the effects of supply and demand are in full effect in all industries. There's simply not enough raw materials to go around.. so MFG's have had to increase prices to accommodate for the increase in raw material costs and lack of supply available. Sad but true.
Hello Bob, the two Nyloc nuts included are not used for the "Driver Floorboards" installation. We include those because these boards can also be used on our "Passenger Floorboard" system located here: ua-cam.com/video/6--kOQaKRuU/v-deo.html Thank you!
I bought these and got the brake side on ok following the insts - however when I removed the screw with the 6mm allen wrench on the left side of the bike not only did the peg come off the whole assembly that was part of the Ryker came off as well. I don't see anything in the owner's manual or on youtube to address putting this assembly back on correctly. Can you send me insts on how to fix that problem. I can probably work it out eventually but I don't want to risk 'missing something'. To be clear, I touched nothing on the Ryker except to pull the bolt that held the stock peg on the ryker. Thanks.
Hello Melvin, if you could please send our support team a trouble ticket we're happy to assist you. You can do that here: www.slingmods.com/index.php?route=information/contact Thank you!
Yes, the Spyder F3's have 5 foot positions. Please bare in mind, if you adjust your foot position on the Spyder F3 you'll need an adjustable Brake Rod. You can find that item here: www.slingmods.com/canam-spyder-brake-rods
These boards mount to the same location as your factory pegs, and offer a patented anti-rotation locking system allowing for precise angle adjustment to accommodate your most comfortable foot position while riding. I personally use these to stand on when mounting and dismounting the bike without issue. The boards measure in at 6 ¼” x 4” and feature an integrated non-slip rubber surface. They are available here: www.slingmods.com/canam-ryker-commander-driver-floorboards-show-chrome
ok so a bit new to well to Rykers in general so I've been binging you vids and droopling over all the things I want for my ryker. That beening said why is this the first time I've seen the disclaimer at the 1:30 mark?
Lol. I could see my grand pops rockin' a set of these on his wheelchair with a set of chaser underglow led lights. Now i know what to get him for xmas. 🤣
🛒Can-Am Ryker Floorboards are available here: www.slingmods.com/canam-ryker-floorboards
It's strong enough 💪
I have seen a lot of video of slingmod and the guy who does the install seem like having a blast at least on camera. Good for u finding a job u like.
Brandon has a blast doing what he loves, glad that shines through in the videos. Thx for the comment.
I have a pair .i love them
looks really cool !!
nice but I stand on my factory when stretching and if I cant avoid a bump so I dont know if its strong enough for standing on
That’s how I feel I stand on mine real fast so I might skip that thanks for responding fam
Have a very important question. When I installed the same floorboards , the right foot board ( brake pedal side ) reused screw that attaches to the bike bracket doesn’t screw all the way through . Seems the bracket slides in and doesn’t give room for the screw to go all the way in to hole to the end of the threaded hole . I have it on there tight and it’s holding . It just looks like it needs a longer screw now . Is this like yours ?
I would like to see a video made that shows how to operate the navigation system on a 2017 spyder RT limited once the GPS is installed.
They look great but holy cow the price tag. I was going to buy them until I saw the price.
Understood William... I'll pass it on to the manufacturer. Thanks for the comment.
@@Slingmods same here. If they were in the $100 to $150 range I would get them.
@@jaredourada Yeah.. we don't set the prices but I wish everything on earth was cheaper as well. Regretfully, post COVID the only thing we've seen is one price hike after another across our entire product line. Plastic, Electronic Chips, Steel & Aluminum are on the rise. There's been a 700% increase in shipping container costs. The country was shut down to some degree for over a year and the effects of supply and demand are in full effect in all industries. There's simply not enough raw materials to go around.. so MFG's have had to increase prices to accommodate for the increase in raw material costs and lack of supply available. Sad but true.
Can I have this one on my birthday sept. 23, thanks""
Nice!
I bought these, but they came with two nuts, but I can’t figure out what the nuts are for
Hello Bob, the two Nyloc nuts included are not used for the "Driver Floorboards" installation. We include those because these boards can also be used on our "Passenger Floorboard" system located here: ua-cam.com/video/6--kOQaKRuU/v-deo.html Thank you!
You guys 👦 keep coming up with good things. Can I buy 5 things at once and you give me a package 📦 deal?
Yes of course!
I bought these and got the brake side on ok following the insts - however when I removed the screw with the 6mm allen wrench on the left side of the bike not only did the peg come off the whole assembly that was part of the Ryker came off as well. I don't see anything in the owner's manual or on youtube to address putting this assembly back on correctly. Can you send me insts on how to fix that problem. I can probably work it out eventually but I don't want to risk 'missing something'. To be clear, I touched nothing on the Ryker except to pull the bolt that held the stock peg on the ryker. Thanks.
Hello Melvin, if you could please send our support team a trouble ticket we're happy to assist you. You can do that here: www.slingmods.com/index.php?route=information/contact Thank you!
Can-Am Spider. Are the blake pedals adjustable fore and aft?
Yes, the Spyder F3's have 5 foot positions. Please bare in mind, if you adjust your foot position on the Spyder F3 you'll need an adjustable Brake Rod. You can find that item here: www.slingmods.com/canam-spyder-brake-rods
@@Slingmods thank you👍👍
Are these strong enough to stand on?
Are there anti-slip so foot won’t slide of easily?
These boards mount to the same location as your factory pegs, and offer a patented anti-rotation locking system allowing for precise angle adjustment to accommodate your most comfortable foot position while riding. I personally use these to stand on when mounting and dismounting the bike without issue. The boards measure in at 6 ¼” x 4” and feature an integrated non-slip rubber surface. They are available here: www.slingmods.com/canam-ryker-commander-driver-floorboards-show-chrome
do you guys have highway pegs to use with the floor boards for the ryker?
Hello John, those are in development now! Stay tuned...
Do these boards work on the back for the passenger???
No.. but we're working on those now.
How much are they ?
Hello Michael, here's a link to this product: www.slingmods.com/canam-ryker-commander-driver-floorboards-show-chrome
ok so a bit new to well to Rykers in general so I've been binging you vids and droopling over all the things I want for my ryker. That beening said why is this the first time I've seen the disclaimer at the 1:30 mark?
Hello Wycked, we updated our video format a few weeks ago. That disclaimer will be on all vids moving forward.
I'm all into upgrades from slingmods , but these look like they belong on a wheelchair not a motorcycle.
Lol. I could see my grand pops rockin' a set of these on his wheelchair with a set of chaser underglow led lights. Now i know what to get him for xmas. 🤣