Just got mine from Jeff. He is a great guy to work with and made sure everything functioned correctly. Speeds the process up and makes it a whole new experience. Highly recommend.
I ordered my case feeder from Jeff Goodness . I only after several month sitting in a box while I was overseas was able to put it on my Hornady press. I have to tell you I have never see n a product so easy to install. I think it took only a few minutes and I was feeding my AP press like there was no tomorrow. Jeff your product was awesome and so worth the money and it just was flawess. Thank you big time this feeder really increases my output and makes reloading interesting again. Thanks Jeff. Sorry took me so long to review your product but I work overseas and only now back home. Great product for all you people on the fence, just buy it and enjoy and you will be a happy camper.
I got mine today. Easily installed in just a few minutes. Print quality is great, parts are solid, function is perfect. I ran 500 rounds through it so far with no issues at all. I'll follow up once I get a few thousand through it.
I just received mine from Jeff yesterday. The product was very easy to assemble and works very well. I had just returned from my weekly shoot and deprimed 150 cases in about a third of the time it normally takes. It was well worth the money!
My review is the same as all the others, this case feeder is awesome! The service is awesome! I had a couple of questions and Jeff replied very quickly. In total I received half a dozen emails including updates all along the way. I got it yesterday set up was a breeze, they already had it dialed in. Jeff sends you a personal video showing your case feeder in action. The thumb screws setup was very nice touch. I popped out a couple hundred 9mm in no time flat. When fully loaded it holds about 150 9mm casings. If you are thinking about getting one DO IT you will be very happy!
I got mine today, easy to setup, and much more efficient than the older one I had from someone else. Glad I finally decided to pull the trigger on this one as it is much nicer and will save me a lot of time during caliber changes. An FYI for those running a large Dram Works glass hopper: It will not clear the hopper if you run your powder drop in the #2 die position and use the standard Lee 15" clear tubes. You will need longer tubes of at least 18" to clear the DW hopper with room for a powder funnel. If you run your powder drop in the #3 die position, there is no clearance issue. This is not a big deal at all as I will just get some longer tubes so I can continue to use the #2 position for my powder drop. Great design and love extra capacity with 7 tubes instead of just 4 like the one I had.
Finally got mine installed, and it is amazing. The time saving and efficiency are through the roof. I hated hand loading cases. With a RCBS lockout die and your primer flag, I can haul a$$ reloading.
got mine yesterday... FANTASTIC fella, and amazing product! my all-inclusive rig & add-ons aren't even unboxed yet, but this item stands on its own for quality, function & versatility. gonna get at him & see what other Hornady accessories he might produce. this purchase was a great experience!
Just got one, FYI tip, I used little case lube for case pad around end of tubes about 1/2 to 3/4 inch.... slipped in like butter. Thought was going to break the tubes trying to get them in there. Seems to be good design.
Hi Jeff, got the L-N-L case feeder setup. Ran perfect thru setup, which took maybe 5 minutes. I can't wait for the LEE APP to get here, thanks for providing great equipment at a very reasonable price.
If you are even remotely considering getting a case feeder for your Hornady lock-n-load press, GET THIS ONE!!! This thing is awesome! It takes less than 5 minutes to install and, while I haven't had a problem, Jeff is great at answering questions and giving good advice. It will be the best $110 (free shipping) you've ever spent! Hey feel free to contact me if you still have a question that you think I could answer.
Jeff, looks like a great product! I'll be getting my press soon, so I have saved this. I will be loading 7MM Remington Magnum, will that also work? The cases are about 2 1/2 inches long.
Yes the jumbo for 7mm Here's the video ua-cam.com/video/qyMwOt3nU9A/v-deo.html also on the description is a link to the Google sheet of what calibers I've tested. Drop hole 3 is what I ran the 7mm on.
What kind of durability can be expected from the feeder? Number of rounds before failure? I'm would love a reasonably priced feeder, but have concerns about it being all plastic. Thanks!
They hold up for the long haul. Been using my own for many thousands of rounds. Several other folks who them can also attest to there longevity. My warranty policy is also great!!
@3dReloaded3d I realize by your website that you are 4 weeks behind. Just trying to find out where I am at in the shuffle? Thank you for any information you can give me.
You would have to modify the back of your press pretty accurately I would imagine. It would need to line up right. This hooks into the back on the newer models where the standard hornady casefeeder would go.
Jeff are you making these and selling them? Its kind of what I'm gathering and if it is can I get your website or email by chance I just purchased an AP and I like this design. I would rather give another reloader money than anyone else. Thanks
Test comment - “Excited to receive the Case-Feeder. Thank you for the help in Messenger and I will give you a shoutout on my channel when I get everything all setup”
5 stars!! I wish I had perchance this a long time ago.. quality product thank you Bill
Just got mine from Jeff. He is a great guy to work with and made sure everything functioned correctly. Speeds the process up and makes it a whole new experience. Highly recommend.
I ordered my case feeder from Jeff Goodness . I only after several month sitting in a box while I was overseas was able to put it on my Hornady press. I have to tell you I have never see n a product so easy to install. I think it took only a few minutes and I was feeding my AP press like there was no tomorrow. Jeff your product was awesome and so worth the money and it just was flawess. Thank you big time this feeder really increases my output and makes reloading interesting again. Thanks Jeff. Sorry took me so long to review your product but I work overseas and only now back home. Great product for all you people on the fence, just buy it and enjoy and you will be a happy camper.
Hey Scott thank you for that!! I'm glad your finaly home and able to enjoy it!!
I got mine today. Easily installed in just a few minutes. Print quality is great, parts are solid, function is perfect. I ran 500 rounds through it so far with no issues at all. I'll follow up once I get a few thousand through it.
I just received mine from Jeff yesterday. The product was very easy to assemble and works very well. I had just returned from my weekly shoot and deprimed 150 cases in about a third of the time it normally takes. It was well worth the money!
My review is the same as all the others, this case feeder is awesome! The service is awesome! I had a couple of questions and Jeff replied very quickly. In total I received half a dozen emails including updates all along the way. I got it yesterday set up was a breeze, they already had it dialed in. Jeff sends you a personal video showing your case feeder in action. The thumb screws setup was very nice touch. I popped out a couple hundred 9mm in no time flat. When fully loaded it holds about 150 9mm casings. If you are thinking about getting one DO IT you will be very happy!
Awesome sir. Glad your liking it and thank you for your comments!!!
I've got to join the chorus here, just got mine in and it is night and day difference. Very smooth and easy to use. Really speeds up processing time.
Just got it. The hard part is the tubes. Works great, can't wait to use.
I got mine today, easy to setup, and much more efficient than the older one I had from someone else. Glad I finally decided to pull the trigger on this one as it is much nicer and will save me a lot of time during caliber changes.
An FYI for those running a large Dram Works glass hopper: It will not clear the hopper if you run your powder drop in the #2 die position and use the standard Lee 15" clear tubes. You will need longer tubes of at least 18" to clear the DW hopper with room for a powder funnel. If you run your powder drop in the #3 die position, there is no clearance issue. This is not a big deal at all as I will just get some longer tubes so I can continue to use the #2 position for my powder drop.
Great design and love extra capacity with 7 tubes instead of just 4 like the one I had.
Another great demonstration on why a 3d printer in the loading room makes so much sense. Thanks Mike.
Thank you sir. I couldn't agree with you more!!!
Looking forward to getting mine. Excited to try it. Glad I got off my rocker and ordered!
Finally got mine installed, and it is amazing. The time saving and efficiency are through the roof. I hated hand loading cases. With a RCBS lockout die and your primer flag, I can haul a$$ reloading.
Awesome to hear it sir.
Installed mine! Love it, Jeff! Thanks for the personalized instruction.
Awesome to hear sir!!! Your very welcome!!!
This thing is awesome! Super easy to setup, simple rig and works great!
got mine yesterday...
FANTASTIC fella, and amazing product! my all-inclusive rig & add-ons aren't even unboxed yet, but this item stands on its own for quality, function & versatility.
gonna get at him & see what other Hornady accessories he might produce.
this purchase was a great experience!
Thank you sir for the kind words!!! I'm sure you'll enjoy it no doubt!!!
Just ran 200 9mm and this worked great. Looking forward to using on additional cartridges
Nice man glad to hear it!!!!
Just got mine in. Easy to install and works perfectly. Thanks Jeff
Just received my kit today. I was reloading within minutes. Well worth the money!
Glad it was an easy setup for you!! I appreciate the comments. Thank you!!
Just got one, FYI tip, I used little case lube for case pad around end of tubes about 1/2 to 3/4 inch.... slipped in like butter. Thought was going to break the tubes trying to get them in there.
Seems to be good design.
Hi Jeff, got the L-N-L case feeder setup. Ran perfect thru setup, which took maybe 5 minutes.
I can't wait for the LEE APP to get here, thanks for providing great equipment at a very reasonable price.
My pleasure sir. Glad your liking it. Let me know if you need anything else.
Where can I purchase this? Great job on the video!! Thanks!
Hey Ramon, you can send me an email at goodnessj181@gmail.com
Were can I purchase this at
@@markatchley8118 you can send me or Matt an email. Goodnessj181@gmail.com
Matthew Grabo
How long does it take to get one once paid for?
To answer my own question. They do not ask for any money until the day before they ship it.
Trying to get more info on a case feeder .
Hello your welcome to email me at 3dreloaded3d@gmail.com or the website is www.3dreloaded.com
I need one how can I get it 🤔
You can order from my website www.3dreloaded.com
Can this be mounted with the Inline Fabrication double tray, or do the two attachments obstruct each other?
No it can be mounted with it. It has a slot on the side of the brace to allow the inline fab setup.
I sure love mine! Great job and easy to deal with!
Hey Bragging rights can I ask what a rounda bout price did you pay for yours buddy
If you are even remotely considering getting a case feeder for your Hornady lock-n-load press, GET THIS ONE!!! This thing is awesome! It takes less than 5 minutes to install and, while I haven't had a problem, Jeff is great at answering questions and giving good advice. It will be the best $110 (free shipping) you've ever spent! Hey feel free to contact me if you still have a question that you think I could answer.
Oh! 1 more thing. The way this is designed to capture the brass as it falls is pure qenuis!! It doesn't fall over!
Will this work on large caliber cases like 44mag and 45colt?
Hi Adam I can check on that for you. Think I have some of that brass kicking around.
Jeff, looks like a great product! I'll be getting my press soon, so I have saved this. I will be loading 7MM Remington Magnum, will that also work? The cases are about 2 1/2 inches long.
Hi David, for 7mm I would recommend running that on the jumbo add on. I believe I've tested that caliber on that.
Yes the jumbo for 7mm Here's the video ua-cam.com/video/qyMwOt3nU9A/v-deo.html also on the description is a link to the Google sheet of what calibers I've tested. Drop hole 3 is what I ran the 7mm on.
@@3dReloaded3d Thanks! I'll be looking it over.
@@davidheffron4481 sounds good sir let me know if you have any questions!!
How long do 3D printed components last? Do they eventually crack from stress or other failures seen?
anyway to get the files to print all this myself? I just bought a printer and really want to print this for myself.
I'm sorry but our files are not for sale. There are some other variations on thingiverse
What kind of durability can be expected from the feeder? Number of rounds before failure? I'm would love a reasonably priced feeder, but have concerns about it being all plastic. Thanks!
They hold up for the long haul. Been using my own for many thousands of rounds. Several other folks who them can also attest to there longevity. My warranty policy is also great!!
How would I order one and what kind of price ?
Hi Tony you can send me an email at goodnessj181@gmail.com
Ok thx I sent you an email
I would like to buy one, how do I go about that and how much? Looks like a great product!
Thank you. You can send me or Matt an email and we can set you up. Goodnessj181@gmail.com or mgrabo1024@gmail.com
That’s all well and good, but where do you purchase?
Hi Gary you can send me an email. Goodnessj181@gmail.com
I like the video where would I buy one of those what site do I go on
You send an email to me at goodnessj181@gmail.com
Do you sell on eBay too
No just the website.
How do I get mine 3:03
You can order on the website. Www.3dreloaded.com
@3dReloaded3d I realize by your website that you are 4 weeks behind. Just trying to find out where I am at in the shuffle? Thank you for any information you can give me.
@@PatrickGluba your 4th on the list so won't be long at all now.
is there stls available to print it myself?
Unfortunately the STL files are not available.
oh ok thanks@@3dReloaded3d
@@Hughie1987 not a problem sir. Sorry that they are not available.
Looks great!
Link to purchase
Our website is Www.3dreloaded.com
Would this work on an older model Hornady LNL AP? Mine doesn't have the machined top or the angled part in the back.
You would have to modify the back of your press pretty accurately I would imagine. It would need to line up right. This hooks into the back on the newer models where the standard hornady casefeeder would go.
Just sent you a message on Facebook, I need to get my hands on one of these. Good work!
Hey junior did you send it to me or Matt?
@@3dReloaded3d hey were can I buy one of these
Hello Jeff!!!can i buy this kit for hornady lnl???i use for 9x21, its ok??
Yes will work fine. Send me an email goodnessj181@gmail.com
Can you tell me what this case feeder is selling for and are spare parts available in case something breaks?
Hello, I would be happy to give you more information on it. Just shoot me an email. Goodnessj181@gmail.com
want to buy one , how do I get in contact with you
Hi Brent shoot Matt and email at Matthew Grabo
how well has this held up since you made it? Just ordered the LNL today and curious about getting one of these kits.
The one I've run for a long while now with no issues. But if something does break you get ahold of me and I send you new part.
@@3dReloaded3d how can I get one?
@@thomasgullikson980 hello sir. Shoot me an email at goodnessj181@gmail.com
Looks pretty slick, I'd like some more info! Maybe add a link in the description.
Thank you!!! Right now I've mostly been taking orders through Facebook messenger. Don't really have a website for ordering.
m.me/jeffrey.goodness
@@3dReloaded3d hello Jeff AP PRESS IS ON THE WAY CAN I ASK HOW MUCH FOR your Great idea THE 3D bullet feeder please. Thank you
Just messaged you on FB. Im interested in info.
How to get one of that
Just email myself or Matt. Our emails are in the description
How can I buy one of these
Send me an email sir. Goodnessj181@gmail.com
Where do I go to buy this?
How much are these? I am interested in trying this out.
Hi Brock happy to get you going with one. Shoot me an email at goodnessj181@gmail.com or on Facebook messenger.
Sell the files to DIY ?
No we do not sorry.
Jeff are you making these and selling them? Its kind of what I'm gathering and if it is can I get your website or email by chance I just purchased an AP and I like this design. I would rather give another reloader money than anyone else. Thanks
Yup shoot me an email at goodnessj181@gmail.com
@@3dReloaded3dare the still for sale
@@markatchley8118 hi Mark they are. Shoot me an email at goodnessj181@gmail.com
i need this in my life
where find 3d file????
The files for the version that Matt and I make are not available unfortunately.
@@3dReloaded3d ohhhhh thanks
Link to file?
Files are not available!
Where can I purchase one?
How its possible buy this?
Test comment - “Excited to receive the Case-Feeder. Thank you for the help in Messenger and I will give you a shoutout on my channel when I get everything all setup”
I sent an email. No Facebook here either
Well….. it works 👌🏻
Hopefully it works great!
How can I purchase one of these?
Shoot me a message here.
facebook.com/jeffrey.goodness
@@3dReloaded3d hello Jeff can you shoot me an Email with some pricing info I'm not on Facebook please and would love to know pricing please thanks
@@AMCAL2311 sure thing whats your email address?
@@3dReloaded3d amcal308@gmail.com
I sent you a message on FB. Thanks
Email sent
How do I order one
How do I get one?
You can order on our website. Www.3dreloaded.com