Such a genius design! The more I look at the mechanism and the way it works, just takes my breath away! The design is small. Rather than being a 4-5 stud wide revolver that most people make, this revolver is literally 3 studs wide! Luckily I had the pieces needed
Congratulations u have a new subscriber. Thank u soo much I was searching in UA-cam to find Lego revolver but I didn’t have enough peace but I have all peace for this one thank u so much!!!!!!!
My gun wouldn’t fire because I couldn’t find the right rubber bands. and to top it all off: the cylinder won’t spin, the trigger and the hammer gets stuck
basicly, there is a rubber band turnning it, and when the bullet is in the cylinder, it blocks it from turning, and when it gets shot out, the cylinder is free to turn until the next bullet stops it from turning again.
This is almost an exact replica of my revolver design, I have no problem with you using my designs in a video, but you are taking credit for my designs which I do not appreciate. I see you have mentioned in the original video that it is inspired by me, but people are getting the wrong idea in your comment section.
Ich bin ganz ehrlich viel zu schnell und du zeigst die Sachen nicht richtig in die Kamera , teilweise hattst du sogar die Finger auf den teilen so das man nicht sehen konnte welche Teile das sind
thanks for the tutorial, now I can successfully go through security and hijack the plane
Henry. L yessir
Lol
big brian time
Wait. So you assembled it on the plane?
Lol, Henry, you have 41 likes, not bad
Such a genius design! The more I look at the mechanism and the way it works, just takes my breath away! The design is small. Rather than being a 4-5 stud wide revolver that most people make, this revolver is literally 3 studs wide! Luckily I had the pieces needed
Thank you so much. :D
I really appreciate it
Enjoy! btw the mech is inspired by DrifiKing 5325
I can’t wait for the day where I will finally have the 1 last piece I need for this
lol
Amazing Colt Single Action Army
I'm definitely making this if I can find an alternative to the H pieces that houses the cylinder.
I love how the music at the start is Barney the dinosaur thing, a weapon of destruction has kids music :)
Congratulations u have a new subscriber.
Thank u soo much I was searching in UA-cam to find Lego revolver but I didn’t have enough peace but I have all peace for this one thank u so much!!!!!!!
Best lego revolver I have ever seen
I can’t wait to actually get to build this 😂👍
Good luck!
wow 1000 veiws, thanks guys
Im sure i dont have enough parts but i will try :)
Good luck!
hey can you make a video showing all the pieces needed because im not trying to build this and have it to turn out im missing a piece
the intro song brings back memories
I like how you use colonial music for the most Cowboy weapon possihle
Great but where are we supposed to put the rubber band for the auto rotation I couldn’t see in the video
Dude keep up the good work my guy
thanks man
@@randomstuff98yt nP
Hey man amazing gun if it’s not to difficult could you post a list of materials/pieces b/c I have many pieces but I couldn’t see them very well
Sorry, I took the gun apart already
ua-cam.com/video/4B-ppd-VUso/v-deo.html, heres a better tutorial with the part list
Thank you so much
lol, yw
Good all kids watching this will make this best lego creation ever and rob the bank...
yessir, lol
@@randomstuff98yt luv ur vids
@@tushmannn lol, thank you :)
Amazing.
thanks :)
Don't have the peices to build but would if I could
is there an alternative piece for the H?
amazing!
NICE!!
thanks :)
Pretty good! :)
Can you give us a list of parts needed in order to build this amazing Lego Revolver?
sorry, i broke it already. just try lokking at the vid
@@randomstuff98yt ok
Join my discord server for the part list
(go to the channel called #instructions-partlists)
link: discord.gg/mBeJ5a8HR6
@@randomstuff98yt i am there already but thanks!
ua-cam.com/video/4B-ppd-VUso/v-deo.html, heres a better tutorial
Thank you thank you thank you thank you
The whole building clip was played backwards
yep, i'm to lazy to remember how to build it, so i just break it and play the clip backwards, lol
So that’s why it looked like you were being so rough
@@helenefawcett6353 lol
It’s great💪🏼👍🏼, but it’s a little fast and you can’t always see your hands.
lol, sorry about that. i'll try to make my tutorils better in the future
@@randomstuff98yt No problem, your tutorials are still great! 👍🏼🤗
Pixel Akio thanks!
a better pdf instruction for the revolver is comming soon, lol
rip creeper
My hands hurt after the first 3 pieces...
Then I broke the rubber band 🙃 how great
My gun wouldn’t fire because I couldn’t find the right rubber bands. and to top it all off: the cylinder won’t spin, the trigger and the hammer gets stuck
Very epic!
The fact i her barney the dano 💀💀
What’s the black thing called at the start and where you get the lego for this
The thing at the start is a rubber band
I got the LEGO’s from a technic set I took apart
Nice I love your videos I subbed
@@Astro_OB thanks!
how does the barrel thingy turn?
hard to explain
basicly, there is a rubber band turnning it, and when the bullet is in the cylinder, it blocks it from turning, and when it gets shot out, the cylinder is free to turn until the next bullet stops it from turning again.
hope you understood, lol
Did you get these pieces from a set or brick link
All but 2 of the pieces came from the technic gs adventure set. I had the the other 2 parts just lying around
@@randomstuff98yt might I ask what set was it
And what were the other 2 parts
@@AllAardvark 42063
@@AllAardvark 32271 and 32013
y barney music?
Cause it was the us marching song during the civil war
@@randomstuff98yt
ahh thx
@@randomstuff98yt it still really cool
Is there anything i can replace mag parts (These wheels)?
I don’t think so
Sorry about that
You can buy them on bricklink for like 5 cents, if you want, I can send you the link
@@randomstuff98yt Thanks for help.
@@sonnycrockett6992 here is the link: www.bricklink.com/v2/catalog/catalogitem.page?id=823#T=S&C=86&O={%22color%22:86,%22iconly%22:0}
This is almost an exact replica of my revolver design, I have no problem with you using my designs in a video, but you are taking credit for my designs which I do not appreciate. I see you have mentioned in the original video that it is inspired by me, but people are getting the wrong idea in your comment section.
@DriftKing 5325 I already gave you credit, but I’ll put it in the pinned comment
@@randomstuff98yt thank you very much, have a happy new year!
ur vids are good to! don get down
The cylinder is not spinning
make sure to use the rubberband at the start
@@randomstuff98yt I repaired it and now it works thanks for help
I dont understandhow barrel is spinning
Lol the Yankee Doodle song is in the back round and also amazing gun
lol, thx
Navy revolver
Yes
@@randomstuff98yt Y E S
@@JAMILATUMOHAMMED lol
@@randomstuff98yt I am poor so I can’t make your gun :p
@@JAMILATUMOHAMMED :(
GOOD 👍➕➕➕➕👍👍👍👍👍🔘
ПЁСИК РЕКС thx
!esrever ni si lairotut eht woh ekil I
P.S. Yes, it's in english
Lolllll
Hate the Music, but cool gun
that was the US marching song during the civil war, somehow, it has evoved into a kids song for some people, lol
Can bring to school?
How does he expect us to see all the pIEces when literally his finger or thumb is ALWAYS ON THE IMPORTANT PIECES
wait, i'll uploda a pdf version soon
Thanks
@@nighttskies I’ll upload it today
ua-cam.com/video/4B-ppd-VUso/v-deo.html, here
ima play russian roulette
Parts list okeade
The gs adventure set has all the pieces expect for 2
@@randomstuff98yt ok
@@randomstuff98yt no problem I have a lot or technic thank you
@@randomstuff98yt also what size subnet band
@@pocket_historian1807 the rainbow loom stuff
How does it shoot
Because I don't have the 2 pieces on the sides holding the trigger the barrel and the handle together
@@ilovesuicidaltendencies1865 which pieces? please describe them
you use the two pieces to connect the hammer together
You mean the “i” shaped pieces?
no they are light grey and have the hammer between them
This can never be a tutorial 😞😞😞😞😞
800th like lol
lolll
@@randomstuff98yt lol
To fast
click on the gear icon, and select plabackspeed, then change it to 0.75 or 0.5
Ich bin ganz ehrlich viel zu schnell und du zeigst die Sachen nicht richtig in die Kamera , teilweise hattst du sogar die Finger auf den teilen so das man nicht sehen konnte welche Teile das sind
It not working :/
Does the cylinder not spin?
The bullets didnt fit well here
Best lego revolver I have ever seen