You can definitely add on/off switches. Location of the switch is important since you could have it turn off both or just one of the bulbs depending where you put it. If you want it to turn off both bulbs the switch needs to be next to the battery.
@@AaronKennedy oh, it’s cuz I’ve been watching LED light experiment videos and they use a resistor in those videos and I was wondering if a resistor was needed with these mini light bulbs. 👍
aaron, hi.. cool simple video with a parallel circuit. hey do you know if it is possible to buy online slightly bigger motors like that one? if so, can you point me to a good website you may know of? thnx
ebay! Seriously, try it. I just bought a small motor, 1/240 rpm, to make an egg-turner for a homemade incubator... there were several 1rpm motors, and bigger.
Hi I did the same exact thing but my bulb that is close to the batteries is brighter than the one further away from the battery although is it a parallel circuit
Junda the current (amps) is split in a parallel circuit. Causing LESS watts at each bulb. Volts measure same. Watts=volts times amps. Less amps equals less watts, equals less brightness.
Are light bulbs like batteries ? Connecting two 6V batts in parallel gives 6V but in series give 12 V . Is it the same for 6 V bulbs ? If I have a 12 V batt , can I use 2 - 6V bulbs in series without problems.
Bulbs - Google or go to Amazon and search for something like E10 Mini Bulbs Bulb holders - Google or go to Amazon and search for something like E10 Mini Bulbs Holders Rest of the materials are in the section below the video's info.
can anybody help with this question? In my opinion there is a value (voltage) missing from this question.. but I may be wrong. here goes. There are 3 heating elements, each are 250 watts wired in parallel, calculate the current total to each element
Experiment. Try adding a button/switch in different spots in the circuit. You can make different things happen with the switch in different locations. If you place the switch near the battery, then the switch is will turn on and off all the lights. Depending on the wiring, putting the switch near a bulb may affect just that bulb.
I think you can get this sort of stuff at Radio Shack. If you live in a city with a Fry's Electronics, they definitely have it. You could order online from them or really any electronics/hobby site.
Hi sir, i want to ask a question. How do you make a parallel circuit with battery and a switch? If possible please reply, this video might be 4 years old but maybe you can respond?
You can definitely add on/off switches. Location of the switch is important since you could have it turn off both or just one of the bulbs depending where you put it. If you want it to turn off both bulbs the switch needs to be next to the battery.
i made my own circuit on school and it works an i tried with the pencil and it works and i leted the switcher to work also\ its was soo easy and my wi-fi was not working and i fixed it
what about a switvh
ua-cam.com/video/TAvmtipPjtQ/v-deo.html
Excellent video! I always do a series because I'm not familiar with parallel but I am now!! Thanks!!
Awesome demonstration! Very cool. Thanks!
perfect video,i been reading basic electricity book that i ordered on amazon and videos just helps me understand it alot better!!!
Udaya✌️✌️👍👍👌👌💡💡
WOW U ARE HELPING MY PROJECT RN
Thanks bro now I can finish my school project
THANK YOU VERY MUCH THIS IS OUR PROJECT
Important question: can you add an on and off switch and a resistor to this one project? 🤔
You can definitely add on/off switches. Location of the switch is important since you could have it turn off both or just one of the bulbs depending where you put it. If you want it to turn off both bulbs the switch needs to be next to the battery.
@@AaronKennedy thanks. But can u also add a resistor? 🤔
@@jesusresendiz875 Don't know why you can't, not sure what you are trying to accomplish.
@@AaronKennedy oh, it’s cuz I’ve been watching LED light experiment videos and they use a resistor in those videos and I was wondering if a resistor was needed with these mini light bulbs. 👍
U light up meh world
Dude, this guy is amazing ☺️
Thank you from an accountant : )
What volt in your battery at your lights
AA batteries are 1.5V
MAN SO USEFUL FOR ME.TY:)
thanks , just made my own lamp :D
Important question: Where did u buy those types of lightbulbs? 🤔
Try going to Amazon and searching for E10 Mini Bulbs
Important question: can u also use a 9v battery here instead? 🤔
Thank you so much!!! i had to do a project in science about a paralel circuit and i really sucked at it but thanks for the advice
Same
Closed circuits light up the world. Let there be light.
thanks alot,it really helped me making parallel circuit XD
Important question: can u use a 9v battery here instead? 🤔
aaron, hi.. cool simple video with a parallel circuit. hey do you know if it is possible to buy online slightly bigger motors like that one? if so, can you point me to a good website you may know of? thnx
ebay! Seriously, try it. I just bought a small motor, 1/240 rpm, to make an egg-turner for a homemade incubator... there were several 1rpm motors, and bigger.
Can you do a parallel circuit with a switch?
Pls its for my project😞
Tnx😊
Sorry, I am so late in my response, but yes, you can put a switch in a parallel circuit.
burat kaaaa
tangina moo
christian trinidad ang bobo mo cancer tuloy tignan ang mga pinoy kakaganyan ng marami
Me too
Aaron Kennedy how???
thank you for this vid because it help in my project ty.
Ellaine Gabayeron me too
Thanks for making that video because I would not have known that on my own
Thanks! Now my nephew can do his science project.
if I want to put a switch where should i place it?
Right after the batteries
What materials did you used?
What are the materials used for this?
thank you for that advice because I have a project about that
Hi! Will this work using 2 bulbs connected to a rotary switch that is connected to a water valve as the on/off switch?
What are these small bulbs called ?
E10 Mini Bulbs, parts are listed in the video description.
U used two batteries in the first way of parallel circuit?
इलेक्ट्रॉनिक फिजिक्स -समान्तर एवं श्रेणी क्रम परिपथ |Parallel and Series Circuits|
ua-cam.com/video/w_qrnbBLf7I/v-deo.html
Can i add 1 bulb? Total of 3?
Sure
Thank u so much I had do my project very easy
can you
do with four bulbs
how does he strip his wires like that ?
Does the type of wire matter? I'm using e14 bulbs.
What if you add a switch, how will you do it?
*****
+Aaron Kennedy thanks sir now i have a project in science thank you very much it helps me alot..
Where did u get the light bulb holders from?
Please give me the list of names of the materials used.
Excuse me can you please tell me where I can find a light bulb holder like that
Check google or amazon for E10 Mini Bulbs and E10 Mini Bulb Holders.
Hello
Why the resistor is not connected in parallel circuit ?
Don't need one. The light bulbs act like resistors I believe.
What's the motor for at the end of the video?
Search Amazon for "toy hobby motor".
very nice video
Can we connect two 23 watt CFL circuits in series or parallel in order to get a 46 watt CFL circuit? If so, then how?
Can I do this with 6-8 bulbs with a switch?
Can I ask if i can combine parallel and series circuits together? Please answer back
Yes.
Can we use another wire except for copper wire
thanks, you helped my group
but can you please make one with a switch
Hi I did the same exact thing but my bulb that is close to the batteries is brighter than the one further away from the battery although is it a parallel circuit
Could u maybe tell me what went wrong?
Junda the current (amps) is split in a parallel circuit. Causing LESS watts at each bulb. Volts measure same.
Watts=volts times amps. Less amps equals less watts, equals less brightness.
Where would you install a ground wire in this circuit
Ground wires are not necessary for a small dc circuit. You usually see ground wires in larger AC circuits as a safety measure.
Where to buy the bulb please?
what kind of button is that?
Dude what materials you use
Thx cuz i criously needed to know this 4 my Science Project! 😊😊😊
इलेक्ट्रॉनिक फिजिक्स -समान्तर एवं श्रेणी क्रम परिपथ |Parallel and Series Circuits|
ua-cam.com/video/w_qrnbBLf7I/v-deo.html
Me too
Great video
Is this the same as using Pig Tails for outlets?
Can you do a one bulb parallel circuit???
A circuit with a bulb and a battery only would be a series circuit, not a parallel circuit.
I have 4 septacle is that okey if i use it in parallel?
Yes.
What type of wire are you using for this?
he should be using any type of wire
Can you point me to a video showing a practical example of a series as well?
ua-cam.com/video/BPkfDC50RbM/v-deo.html
Are light bulbs like batteries ? Connecting two 6V batts in parallel gives 6V but in series give 12 V . Is it the same for 6 V bulbs ? If I have a 12 V batt , can I use 2 - 6V bulbs in series without problems.
RapidsVideo i hope you didnt shocked yourself
what does the motor do ?
and were can i buy that stuffs?
Where do you buy these things
Interesting. Two (2) series circuits, one load each (Direct Current) wired in parallel. The current is split over the 2 bulbs. Thank you.
Can anyone helpp me pleasee. What's the name of the tiny bulb in the video? Pleaseee comment down below. I really need your help
Bulbs - Google or go to Amazon and search for something like E10 Mini Bulbs
Bulb holders - Google or go to Amazon and search for something like E10 Mini Bulbs Holders
Rest of the materials are in the section below the video's info.
@@AaronKennedy thank you sir.
can anybody help with this question? In my opinion there is a value (voltage) missing from this question.. but I may be wrong. here goes. There are 3 heating elements, each are 250 watts wired in parallel, calculate the current total to each element
How did u do that i dint understand?-_-
But how we need to connect button with this
Experiment. Try adding a button/switch in different spots in the circuit. You can make different things happen with the switch in different locations. If you place the switch near the battery, then the switch is will turn on and off all the lights. Depending on the wiring, putting the switch near a bulb may affect just that bulb.
Thank you very much
Sir what item's do i need to make? it it's a project!
Check google or amazon for E10 Mini Bulbs and E10 Mini Bulb Holders. That should get you started.
Project success😀😀😀
How much volt Capacity of bulb
?
Hi, I think I have a problem. My 2nd Bulb in upperside wont light. What should I do? Please😥😥😥
Mine too... Please help.. it's urgent
Maybe its series circuit
sir what items or stuff do you need to build it?
I think you can get this sort of stuff at Radio Shack. If you live in a city with a Fry's Electronics, they definitely have it. You could order online from them or really any electronics/hobby site.
Thank you sir
I make it by the battery only :)
i try it too yehey.
sir help me
u need : bulb , wire , battery
Thank u
Thank you so much my brother needs this because he cant remember which one is the one when you remove one bulb the other one turns off but thanks alot
🎉
sir how much does it cost all the materials you think??? please answer back ty
16 dollars at most
Vienzee Gt 108 pesos in philipines
How
Great song
Hi sir, i want to ask a question. How do you make a parallel circuit with battery and a switch? If possible please reply, this video might be 4 years old but maybe you can respond?
You can definitely add on/off switches. Location of the switch is important since you could have it turn off both or just one of the bulbs depending where you put it. If you want it to turn off both bulbs the switch needs to be next to the battery.
Thanks really helpful
pwede po ba to lagyan ng swticht?
I tried it and it didn't work
Bro what is voltmeter is it a wire or something and what is the ammeter btw this a good video it helps me to my project thx in a million
A voltmeter is a device that tells you the voltage and an ammeter is a device that tells you how many amps/amperes there is
COOL SOMETIMES MUCH BETTER TO BE SIMPLE,JUST LIKE THIS VIDEO,,SIR TO HAVE MORE VIDEO LIKE THIS ABOUT ELECTRIC LIST?
do you have a version lime that for a series connection? thank you sir for the video. it helps me alot
ua-cam.com/video/BPkfDC50RbM/v-deo.html
ink on
I liked your video
Jubrimie Nacario all experiment
bulok tong video
bobo yung gumawa
oh! i understand now :)
i made my own circuit on school and it works an i tried with the pencil and it works and i leted the switcher to work also\
its was soo easy and my wi-fi was not working and i fixed it
cool
You
Full
Of
Shit
Omar
+Donkey Quality with your cursing self
Average Donkey is a good time to come by and see you soon and have a great day and I will be there at the
Can you do a parallel circuit with a big kingever
Because my it's my project
😊😊😊
Thank bro
i burnt my finger foing this
C'enya Estell I liked your video
sad....
Fake
+Alma Bacero how do you know
+Alma Bacero speaking of hater
thank you ,youved help me and next time please can you put a switch.
Can you bring me some cables to my house y need them for a project that y have to return on this monday
Probably not.
How to fix the switch?😂
I will do it
nice