Powerful steam engine build. Homemade steam engine.
Вставка
- Опубліковано 7 кві 2023
- you can buy tools from amazon that i used in video;
Dewalt grinder machine:
amzn.to/457pJLz
Bosch gsr 120 li 12v cordless drill
amzn.to/464mlm0
amazon basics drill bits
amzn.to/3LxXE91
Hello friends, this video is about steam engine build. This engine is a single cylinder engine. Its cylinder has 12.5mm bore with depth of about 100mm which makes it 12.2cc engine. Bigger flywheel is fitted to engine to increase the moment of inertia and greater power. the flywheel is 100mm in diameter and the inner holes are made from 40mm hole saw. this engine has a sturdy and durable crankshaft which is made from 10mm thick and 6 inches long threaded bolt. connecting rods are made from 1.5mm iron plate. valve is made from 20mm rod with 11.8mm bore and its piston is 11.77mm approx. with single acting arrangement. To run this engine I used the boiler that I had made in the previous video. This engine started working at about 7.5psi pressure.
I hope you all enjoyed the video. Please like and subscribe my channel.
Thankyou
APS Tools
#apstools
Thankyou all for watching the video. Please suggest what should I build in next video.
what you did sir is very professional, is it possible to attach a permanent magnet synchronous generator so it can produce electricity? and what to take into consideration in order to attach it to the generator? thank you
@@vladooomvladoom, Thankyou for suggestion sir, I'll work on it.
@@vladooomI guess he could put a pulley with a belt running to something like a car or lorry Alternator for single use to power a light or to charge a battery system to power numerous things..
Stirling Engine 🥰
Stirling engine
This is fantastic! A potential "all fuel" generator! Add some magnets, a stator and you're it!
Brilliant man. No lathe, no milling machine, no worries. Many people don't appreciate the skill required to achieve this build without the fancy gear.
There is NO WAY that cylinder is steam tight
@@gowdsake7103it’s not you can see it’s exhausting steam out the end of it..the small piston is pressure in…so I’m guessing as I’m no engineer that one piston runs the other…one pushes one pulls..the long one also exhausts the steam as well as having just enough pressure to push it back over on the return for the other to pull…and repeats cycle…I could be wrong.
@@shropshirehistory908 Ive seen old timers walk into a junk yard and build some of the most impressive machinery outa junk ...
@@shropshirehistory908 When the holes line up in the small cylinder ,valve, the steam goes to the large cylinder and pushes the flywheel. As the flywheel turns the small rod is moved and the hole is blocked. The steam cannot flow to the large cylinder. The other side of the small rod is ground so the steam from the large cylinder is not trapped, but can flow out of the large cylinder. This ground spot can be seen at 12:50, is very quick. The large cylinder has one purpose , to push the wheel. The valve does two things 1. allow steam to flow and stop the steam flow and 2. allow the large cylinder to empty out the used steam. hope that helps.
ua-cam.com/video/D5ylCxp6owA/v-deo.html
No welding machine 😂😂😂
Nice work,safety valve on boiler to stop it blowing up
Nice model 👍 the most interesting part is the reciprocating steam inlet valve !
it is ..i was kinda thrown for a loop for a bit the way he designed it. but it definitly works no doubt!
The flattened end will let the air out the end of the slide valve when fully engaged and then let air in through the hole when the valve retracts.
Hyvä suoritus vähillä työkaluilla! Kiitos rakennus ohjeista..
Scotty, give me more power!!!!...Captain I think she's gonna BLOW!!
I absolutely loved it thank you very much!
Absolutely brilliant work. 😃👌👍👍👍
I really commend the skill required to make a build this professional, without any fancy professional expensive machinery. Just an ordinary angle grinder and a hand drill is all it took. Amazing work!
The model is great and the work is great. 👍
nice. now make it to recirculate the water
gracias! tremendo motoraco te mandaste
Awesome work man! I suppose the little cylinder cuts the pressure off while the large one is on its return stroke?
Это лучшая машина которую я видел на Ютубе, БРАВО МОЭСТРО
That boiler though...
You can’t beat a pair of safety flip flops
Muy buena la máquina de presión a vapor, felicitaciones un saludo de Argentina, ♥️🇦🇷🇦🇷🇦🇷.
Thankyou sir, warm regards to you
respect to your build. Nice engine
Thankyou brother, my regards to you
Very nice art❤
Great work, had a model like this in my school days, (that was about 45 years ago). But your design and functionality are amazing. Keep up the good work.
Could you please show us a more detailed picture and explanation of how the valve is constructed?
Easy and simple
Bravo
Davvero complimenti, bravissimo. Forse ti direi di collegarlo ad un generatore di corrente, sempre costruito da te 😀.
Ancora complimenti sei un grande. Ottimo lavoro
muito interessante , funciona mesmo
parabéns ficou show
Well done i appreciate your creation thanks for your modal
Too good. Congratulations
Thanks a lot
Great ,but you need a proper visa on that drill
this a very well thought out idea without having to use complicated machinery such as a lathe and a milling machine,, just standard tools that the average person can afford . Do you have a parts diagram with specs? And one last question ...imm not a matha matician by no means but about how much horse power do you think this steam engine you built puts out?just thinking this would be the ultimate backup power source for a dc generator or a a/c generator. for a backup emergency plan in case of a disaster ,,or a wwcrisis .. never know what these little ideas can be in time of need.ty for your time in doing these things . this generation needs more pepole like you who are taught to use what they have on hand and not whats they have to buy ...like the brain..lo!
Amazing what you did with fairly simple tools! Even with much better tools I still have built an engine.🙁
❤that's pretty cool 👍
Mantap...,coba buat pembangkit listrik tenaga uap tapi jangan pakai api buat memanasin air untuk menghasilkan uap,coba ambil elemen pemanas air listrik
Fire! 🔥😳 Good job on the engine. Runs great! 👍
Thanks 👍
@@apstools5521
Can you make the same steam engine, but make it out of wood?
🤔
Sensacional !!!!
Gd nice ixpiremint
Nice work,I’d recommend a pressure safety release for the boiler
I keep seeing this and makes perfect sense, but can you make one, or how do you know what pressure is too high
@@bigriggc5828 it’s basically a needle and seat with and adjustable spring to release pressure at a given amount.if the engine runs on air at 50 psi you wouldn’t let the steam pressure get too high and want to release it.
The boiler needs testing to 3 x it’s working pressure full of water
@@royallan3717royallan3717, thankyou for watching the video. this engine works on 7.5 psi, 50psi is way to high. And I didn't used safety valve as the boiler is fitted with pressure gauge to make sure the pressure remains within the limit less than 15 psi threshold for blast and at same time to cut off the gas supply for burner
Produz um mecanismo de amassar latinhas!!!!
Meanwhile I´m sitting here, in "need" of a metal lathe to change a light bulb...
Good job, man !
...If you replaced that music thing with rather just keep your original work audio, this video would be worth enjoying for quality time.
I,ve had a meta lathe for 10 years but have never used it or needed it to change a light bulb, I use a step ladder, some of the comments on here leave me speechless.
@@billharrison3174 I´m talking about overcomplicatifying things that really can be done as simple tasks. But due to mentality of needing best of the best in specialized tools, stops a regular garage Joe from getting much done at all.
Chill, dude :)
looked up "overcomplificatifying" in my 1967 Oxford high skool dictionary dictionary but could find no such word, I dont know if you are in "the country that the man with the orange hair was going to make great again but if you dont get this piss take then you truly are "an ogre under the bridge" where I live we are truly over "americanisms" where people say "i,m going to the bathroom, " when they mean "i,m downloading some brown files, or I,m taking a piss, but I digress, get to know when its a piss take, as 50 + years in the electrical trade I,ve probably changed more light bulbs than you,ve had hot dinners, and in any case my lathe weighs something around 80+ kgs to you 80 x 2.2, and I wouldnt be able to lift it anyway and since it was manufactured in 1961 it dosent have light bulb changing software (or hardware) Dont change many light bulbs these days asmy wife says anyone over 70 yrs cannot survive if their feet are more than 2 ft off the ground, have a nice day and hope I didnt waste too much of your precious time reading this diatribe. @@ogreunderbridge5204
@@billharrison3174 You have a lot of piss and vinegar in you, I can understand that, got some myself. But you ought to lighten up on those descending assumptions. You dont know me and you´re not even close to bullseying the target. Lot of fuzz to put to a random youtube video compliment. It would be a better societal influence if you use your golden years filming yourself doing interesting projects, share your various experienced insights, put it to youtube, earn a little extra at the same time you can teach the rest of us wet behind the ears, ignorant noobs things about both this and that. Put you lathe to use.
@@billharrison3174 You have a lot of p... and vinegar in you, I can understand that, got some myself. But you ought to lighten up on those descending assumptions. You dont know me and you´re not even close to bullseying the target. Lot of fuzz to put to a random youtube video compliment. It would be a better societal influence if you use your golden years filming yourself doing interesting projects, share your various experienced insights, put it to youtube, earn a little extra at the same time you can teach the rest of us still wet behind the ears, ignorant noobs things about both this and that. Put you lathe to use.
Great work 👍
Thankyou
I couldn't read the gauge......what steam pressure?
Nice job BTW.
Scary boiler i dont see a saftey valve if the engine locks up for any reason somthing gonna blow.😢
Nota 10 muito bem feito, qual seria a potência Hp🙏🇧🇷
The music though
was like 15 more minutes of this after 5 minutes, fk
Do you know anything about hydraulic pumps and the different kinds there are?
Nice job done
Thankyou
So, how did you make the crankshaft?
Very nice build sir! How does steam escape the main cylinder?
Through hose and then valve outlet
Check 13:42
@@apstools5521 No I mean how it escapes the main cylinder. When steam comes in and pushes the piston forward, it has to get out of the cylinder, before the piston can go back, right? I only see the inlet valve, you linked to at 13.42 - but no outlet-valve?
@@DK-jt6bethere's a half cut section at back of the valve, when wheel inertia pushes main piston back hence steam out and it passes through half cut where valve piston is slided outwards and steam escapes check 12:50
@@apstools5521 Alright, now I understand! ua-cam.com/video/11SyDhKqDw0/v-deo.html
Thats brilliant, Thank you very much for explaining !
Cool... but kind of Scary...
Is there a certain angle difference the inlet valve piston and the steam driven piston should be at?
ضجيجه جميل 😊
How many horsepower does that engine have?
Great video, showing all the highlights of a great build. You made it look deceptively easy but obviously there's a lot of skill and precision involved. It would be interesting to put a pulley on it and find a small generator to try. The only thing that you could improve for the sequel is the sound track.
👍
amazing, what is the benefit
How much energy is it producing?
Would work as boat engine using a propeller ??
Yeah good idea.
Es el mismo sistema de la vieja locomotora a vapor !!! Muy bueno , pero, ¿ En qué lo vas a utilizar ?
Just educational purpose
Én is szivesen ösze álitanák egy hasznos. Eszköszt uj terv alapján ha volna hoszá értö csapat. aki segitene meg valositani uj találmányt. ( forgása fojtonos csak más mehanikus moszgás terveszést igényel.
The boiler need a way to conceall the fired in it and ensure the fire is not excess.
He has a pressure gauge on it so I’m guessing this way it regulates heat..if it was to be concealed the temperature would rise at same time raising the pressure…with the heat escaping the pressure stays were it is
یہ ٹھیک ہی ہے مگر سٹیم بوائلر کے لیے آگ بہت زیادہ ہے اور بہت جلدی جلدی کام کیا ہے سٹیم انجن بھی بس گزارہ ہے مزید محنت کی ضرورت ہے
👍👍👍👍👍
must be made of stainless steel, carbon steel 1 test and corrosion
Muito legal só não vi onde é a saída dos gases de escapamento .
Más a construção foi um showl .
Respekt!
But never work with gloves at a drill, very dangerous
Sir you can give me this steam engine I want shift this engine on solar energy.
Do you sell your handcraft products to us, or making them only for your own entertainment
Genratore funziona dene
รับทำใหมครับ
😅😅😅
I got a suggestion for ya how about building something where you don’t use Aleve or high priced equipment that most people don’t have access to tried making a steam engine that way
Me आपसे संपर्क केसे कर सकता हु
🤔
Where is the exhaust port
The rear side of valve is exhaust itself
you have not provided asafty valve
put a generator on it and charge your iPhone.
I'm tempted to stick it out....but when the builder makes 3 unnecessary cuts to them cut off what he cut away from....I know it will be much wasted time. (00:57)
اس پر کتنا خرچہ آتا ھے کیا آپ بنا کر ہم پہ بیچ سکتے ہیں
NO PRESSURE REGULATOR ON BOILER AND NO LUBRICATION ON MANY OF THE WEAR POINTS - ALSO NO PULLY TO TRANSFER POWER TO SOME SORT OF APPLIANCE
Lets see ur effort? You can't build you can't critique
Dont try this at Home 💥💥💥
Just waiting you blow yourself to pieces, lucky that there is no seals so the pressure never build up.. waist of nice material.
next video show what you make not only drilling some pieces
Tutto ok , manca solo l'equilibriatura della biella....
Hello, do you think it is possible to build an engine this small that can produce about 3 HP of power? I'm building a tricycle for myself. Grateful.
3hp would be bigger than this one
@@apstools5521 Yes, I believe it would be bigger, but would it be possible that it wouldn't be so much bigger, a piece of work that would be so heavy that it would be unfeasible to use it on a tricycle made from bicycles?
@@apstools5521 Ah, I'm Brazilian and I live in Brazil, would you have a project for an engine with around 3 HP that you could provide me with?
Sir give me your email address or Whatsapp number.??
Sir me is steam engine ko solar energy pe chlana chahta hn. Mery pass idea Hy. Jis sy ye engine free me chly ga.. is k liy gas ⛽ ya fuel ya wood ki zrort nhi pry gi...
Bravo
👍