I'm gonna be really honest, through 75% percent of this, I was thinking "even I can do much better than this, it's gonna be really tacky" but damn I'm really crushing on the final product!!!! It's freaking good!!!! "Trust the process" I should have
J'essuie le pinceau avec des lingettes avant de laisser sécher la résine UV, puis je le place dans un endroit sombre et sans lumière. Maintenant j'utilise un pinceau avec un embout en silicone et c'est plus pratique et plus facile à utiliser.
@@CynthiaGricken I used to use paper tape before I got resin tape. Resin tape has made things a lot easier. Washi tape works as well. However, I highly recommend using resin tape.
Clean the brush when it is still wet and the UV resin has not cured with wipes. When not in use, keep it in a dark place. Nowadays I use a silicone brush, it is easier to clean and convenient to use.
@@CharmsDIY wish I could send you a pic, I deviated slightly from your design and put my own twist on them, but Thankyou, if you don’t mind I’m gonna include them in my collection 🥰
I'm gonna be really honest, through 75% percent of this, I was thinking "even I can do much better than this, it's gonna be really tacky" but damn I'm really crushing on the final product!!!! It's freaking good!!!! "Trust the process" I should have
Fun fact, UV resin will start to deteriorate after 6 months. So if making jewelry I’d advise against it. -sincerely a jewelry maker
Thanks for the advice ☺️. However, I just love making things using UV resin. It's just so much fun and I enjoy it a lot.
😱😭
Get lost comic book boy
Would epoxy be better?
TFS your experience and knowledge, much appreciated! But what _exactly_ do you mean by *deteriorate?* 🤔
I love this short. I'm dreaming of studio Ghibli making a movie about an enchanted jewelry maker and the magic that they imprint into the jewelry.
Wonderful idea!! These came out absolutely stunning!!
Thank you!!☺
Gives me so many ideas, thank you for the inspiration!! 💞
It's my pleasure 😊
What are the materials used for making these
Craft wire, UV resin, Mica powder, UV lamp, Rhinestone, Tape and craft pliers.
What kind of tape are you using?
I have used masking paper tape here. I am using resin tape nowadays, it is very easy and convenient to use.
Where do we find these earing wire material
I bought the craft wire from Aliexpress.
What paper is beneath the earring ? Resin didn't stick to it
It is paper tape. I recommend using Resin tape than paper tape though.
Comment nettoyez vous vos Pinceaux après ? Mer i
J'essuie le pinceau avec des lingettes avant de laisser sécher la résine UV, puis je le place dans un endroit sombre et sans lumière. Maintenant j'utilise un pinceau avec un embout en silicone et c'est plus pratique et plus facile à utiliser.
Love it
Thank you 😊
Which tape is used as a base?
I used masking tape here but I recommend using resin tape if you can. It is very convenient.
They ARE gorgeous! Thanks for sharing them!🩵💙🩵💙
You are welcome!!
Whats that paper you making on it?
I have used paper tape here.
@@CharmsDIY thanks 😊
What are you putting this on top of? Tape?
Yes, they are on paper tape.
@@CharmsDIY so it's not the tape especially made for resin? Do you think that washi tape would work?
@@CynthiaGricken I used to use paper tape before I got resin tape. Resin tape has made things a lot easier. Washi tape works as well. However, I highly recommend using resin tape.
@@CharmsDIY Thank you very much.
Where did you get the wire foundation for this set? Did you make it yourself?
Yes, I curved the wire around the cylindrical objects I had with with me.
Beautiful ❤️
Thank you! 😊
Is so beautiful
Thank you ☺️
Quelle jolie idée !!!!😮 supeeeer. Bravo. Félicitations 👏👏👏👏💐🍾
merci!!☺☺
Nice and very esy earrings gift? Resin earrings❤
thanks 😊
Excuse me how much mm of the wire you are using?
It is 1mm thick wire, gauge 18.
Hi. What's the tape given below?
It is paper tape. However I recommend using seamless resin tape.
So cute! Taking loads of inspiration form this!
Thank you! Have fun!😊
Very beautiful earrings..❤❤❤❤❤
Thanks a lot 😊
Which tape you usef
Here I have used painter's tape. However, I recommend using seamless resin tape. It is much more convenient and easy to use.
How you clean that brush?
Clean the brush when it is still wet and the UV resin has not cured with wipes. When not in use, keep it in a dark place. Nowadays I use a silicone brush, it is easier to clean and convenient to use.
Neeche Jo ppr rkha h vo kon sa hota h
I used masking tape to stick the frames on. I prefer using resin tape, it is much convenient and easy to use.
Wow, the colors are pretty! I love this
Thank you so much ☺️
Great idea, I love it!❤
Thank you! 😊
Gorgeous ❣️
Thank you! 😊
Beautiful
Thank you
Too cute
thank you!!
Lindoooo, vai fazer o passo a passo?
Olá, tenho um vídeo completo no meu canal, se você estiver interessado.
Link: ua-cam.com/video/AomRHzovKWQ/v-deo.html
Wow love it
Thank you 😊
Very pretty!
Thank you! 😊
😍 … 😍💯
🥰😊😊
Gorgeous❤
thank you!!
I made these and they turned out beautiful ❤
@@KTcov Happy to know. Good luck with your next projects as well.☺
@@CharmsDIY wish I could send you a pic, I deviated slightly from your design and put my own twist on them, but Thankyou, if you don’t mind I’m gonna include them in my collection 🥰
@@KTcov Not at all!! Feel free to do so☺👍