Problem with my brother's new Quad

Поділитися
Вставка
  • Опубліковано 24 січ 2025

КОМЕНТАРІ • 5

  • @jaddbo8230
    @jaddbo8230 9 років тому

    great :D
    cant wait to see some footage of it.
    also, if it is not already, you should set it up for FPV :D :D :D

  • @julianwaters3946
    @julianwaters3946 9 років тому +1

    I'd check connections, maybe resolder and make sure everything's wired up right. Might also want to flash the ESCs with BLHeli. (Superior ESC firmware in any situation- as long as your ESCs can be programmed with it) LHS might be able to help if none of that works- and if all else fails you might just have to get a new set of ESCs. If you do have to go that route I highly recommend emax BLHeli: www.emaxmodel.com/esc/blheli-series-esc.html

  • @WafflePlaneRC
    @WafflePlaneRC 9 років тому

    Looks like an ESC issue to me. What ESCs? If possible, reflash them with BLHeli or whatever firmware they can run. Then, try re-calibrating the ESC on the TX by hooking it directly to the throttle on a RX. Then, plug it in with the throttle FULLY UP, this should tell it where to set your high throttle endpoint. Then, lower the stick, and that will tell it where to set the low endpoint. Unplug, and hook it all back up again. If it still doesn't work, then it may be a FC issue instead.

  • @owenclyde5633
    @owenclyde5633  9 років тому

    We fixed it.:) I just had to recalibrate two of the ESCs.

  • @owenclyde5633
    @owenclyde5633  9 років тому

    It already is FPV. It's ~awesome~