⑬【ボードトラッカー】キックスタート！kick start.
Вставка
- Опубліковано 13 січ 2023
- 当店のホームページ
Our website
www.infinity-aymp.com/
アパレルやオリジナルステッカー等の販売はこちら
Click here for apparel, original stickers, etc.
International shipping is also available.
www.infinityaymp.net/
当店のインスタグラム
Our Instagram
infinity_motorcycle
今回もご視聴誠にありがとうございます。
約一年ぶりのショベルヘッドカスタムプロジェクト。
だいぶ長らくお待たせしてしまいました。
フレーム修正、ブレーキのロッド(クロスオーバーシャフトの整形、修正)、パウダーコーティング塗装、エンジン、ミッションフルオーバーホールなどなど、思っていたよりかなり長い時間がかかってしまいました…
ですが、すべて完ぺきに仕上がりました。当店のショベルヘッドフルカスタムは、フレーム点検、修正から始まり、エンジン、トランスミッションは全て分解してオーバーホール(詳細気になる方はお問合せ下さい)。オープンプライマリーでもセルモーターは取り付け。発電機、点火系、バッテリー、電気配線、バッテリーケーブルまで全て新品。ホイールやシャシまわりのベアリングは全て新品。まで行います。
仕上がり後も100km以上のテストランを行い、問題が無いことをしっかりと確認してからお渡し致します。正直ほかのショップさんよりも高いとは思いますが、それだけしっかりと当時の新車よりも高いレベルで組み上げておりますので、ご興味がある方だけお問合せ下さい。
今年もショベルのフルカスタムは3台のオーダーを頂いております。
4月に行われるジョインツ。8月のニューオーダー。12月のホットロッドカスタムショーそれぞれに出展致しますので、楽しみにしていてください。
Thank you again for watching.
It's been almost a year since the shovelhead customisation project.
We have been waiting for a long time.
It has taken considerably longer than we had hoped, with frame modifications, brake rods (shaping and modifying the crossover shafts), powder coating paint, engine and transmission full overhaul, etc...
But it was all finished to perfection. Our shovelhead full customisation starts with frame inspection and modification, then the engine and transmission are all disassembled and overhauled (please contact us if you are interested in the details). The cell motor is also fitted in the open primary. The generator, ignition system, battery, electrical wiring and even the battery cables are all new. All new bearings around the wheels and chassis. The car will be done up to and including the following.
After finishing, we test run the car for more than 100 km to make sure there are no problems before handing it over. To be honest, we think it is more expensive than other shops, but we build it up to a higher level than new cars at the time, so please only contact us if you are interested.
We have three fully customised shovels on order this year.
We will be exhibiting at the Joinz in April, the New Order in August and the Hot Rod Custom Show in December, so please look forward to them.
#ハーレーダビッドソン #三拍子 #shovelhead - Авто та транспорт
unreal attention to detail, inspiring
Love the music
love the bike well done
The lines of this Shovel build are perfect. This is exactly the bike I would want to own. Can't wait to see it finished.
Thank you for your comment! I think we'll have the car delivered by spring!
Excellent Sir.
B.D.L., SPECTRO, DYNA, TWIN-TEC all used in my shop too. Accell, no, too many problems, very poor customer service too. We use CYCLE ELECTRIC only. I'm happy ACCELL works for you. EXCELLENT
T.S. RACING
I didn't know that Axel products are not good. In Japan, Axel products are often used because they are the easiest to get hold of and have a warranty, but if they are so good, I will try Cycle Electric. Thank you for the good information.
As usual another beautiful build young man 👍cheers for California
Thanks for the comment from California!
Fabulous attention to detail as always - greetings from France 👍
Thank you for all your comments.
We expect it to be completed in February, so please look forward to it. There is a lot of customisation going on this year.
La peinture est magnifique👍, le vert et le gris se marient très bien et les partie en gris du cadre👌 , le support du filtre à huile au top 🖒, je suis toujours aussi impressionné par les détails et la minutie de ton travail👏 , en plus que de pièces de qualité 😉, les caches sur la fourche parfait , total respect pour ton travail 👍👍pour finir le moteur au ralenti une tuerie j adore 😆😍encore merci pour ses moments de plaisir à regarder tes vidéos
Merci pour votre commentaire !
Vous avez été brillamment accroché à notre personnalisation et à notre travail lol.
Nous avons encore beaucoup de travail à produire, mais nous gardons le moral !
いよいよ仕上がって来ましたね。
センスを感じる色合いですね。
楽しみですね！まだまだ作り物が残ってますが…
今日のshovel組み上げは見ごたえありました！
有難うございました☆彡
コメントありがとうございます！しばらくの間は続きます！
voila,ça c est la classe
見てるだけでワクワクします😊
自分も作ってみたくなります。
作ってみちゃってください！
Used a few different skill to complete things 👍🏿 good job! 😎
Thanks for your comment! We'll keep on rolling out new technology!
Your meticulous attention to detail is superb.
Thank you very much!
I don't think customers would notice me if I exhibited at the show, so I'm using the video to show off my work lol.
Bom como sempre.
good job！
Great video excellent work 👍
thanks👍
Interesting front end choice, Looks like a honda dream nice and light weight. Really like color also. Great job!! Gas tank? ; )
Thank you for your comment The gas tank is currently being coloured.
羨ましいです♪
僕もです。
How is the stopping power of that front brake? Are the front forks 33.4 Harley? Great bike build!
Forks are 33.4 mm.
The brakes can be controlled with two fingers because the drums are cut and polished to a tight circle and the brake linings are re-lined with the material used in modern brakes.
毎度、勉強にさせていただいてます！！ちなみにホースクランプはどちらのやつでしょうか？！真似させていただきたく！！
super cool bike…what is model
fire stone rear tires? very cool bro…
Thank you!
Firestone 5.00-19.
BAAM2 OWH WOW 🤯
Nice
ありがとう！
Good work, how many time do you need in real time? Greets.
Thank you for your comment.
I'm hoping to run it by the end of February!
👌👌👍👍super!!!
いつも丁寧な仕事。
ボクのエボ…いつもメンテとかでお世話になってるshop大丈夫かなって気になっちゃうです…
ありがとうございます！まあ問題なく動いていれば大丈夫でしょう笑
やっぱショベルはかっこいいなぁー！！！
手放さなければ良かった、、
今はもう現実的な金額でなくなってきているので、リターンするならお早めに！
Did you mount any silencer or noise breaker in your pipes or are they empty ?
I've got a simple silencer on the end! The sound quality won't be as cool without the silencer fitted...
Do you run into or have a little john transmission.
I'm sorry. I don't know.
👍👍👍👍👍👍👍👍👍👍
i wonder why you always use accel parts for rotor ? are that more better quality ? thank you
I think it is the most reliable because it is readily available and the warranty works.
@@infinitymotorcycle thanks for the respon. I really enjoy your youtube channel video. Very good job 😁👍
@@bratajayadewa8412 thanks😊
Whats the inner primary. Is it a BDL?
BDL! Open primary kit with cell.
👍👍👍👍👍💣💣💣💣💣
What carburettor did you use?.
S&S SuperE
@@infinitymotorcycle thank you infinity and you are one of the most thorough builders i have seen especially with the shovel head engine the way you timed and fitted and tested the ignition system and even using the original double fire system thank you very much for sharing your knowledge.
@@clintdenman3037 I am very pleased with the praise.
We've had a lot of custom shovelheads this year, so I hope to see more from you in the future!
Верхнее крепление двигателя к раме забыл затянуть))
Мы все еще устанавливаем здесь датчик давления всасывания, так что это временная затяжка.
@@infinitymotorcycle Это была шутка. Отлично делаешь и "вкусно" показываешь! ))