Hi ....I got the same signals for my zx6r 2023 .. everything was good but when I turn it off front an back signals are not working (not flashing at all) even is not flashing in the display ... do you think is because I didn't install a flash relay?
I went down on grass with my 05 and cracked/bent my fairing. I'll be doing a streetfighter conversion. Do you have solutions for mounting the speedo? I have the more round one. Also, what exhaust tips are you going to use?
I didn’t actually do the conversion myself unfortunately so I don’t really have an solutions to offer. As for exhaust tips I haven’t really looked into any as I might need to get something custom as all slip on are gonna be too long/ too expensive for what I want to do.
i always bump/ break... so i got suzuki 650 /under the fender /omg.. no gets bumped! looks like 2 in 1 round 2 inches.. with a tag spot.. i luv em... front leds $199 china filled up with water /not sealed :>(
hello i have a problem.. when i instal is flashing just first 2 leds not all 12 , but if i connect to the batery direct works full amd secvential .. why ??
hi I installed all 4 LED turn signals on my Yamaha yzf600r but all 4 turn signals light up when I chose left turn signal all 4 light up and the same when i chose right turn all 4 light up .. any idea how to fix ?? Thankyou.
Hey I ran into the same issue, if your bike uses the same dash light for both the left and right. Current will reverse flow through the bulb and cut on the the opposite side. If you pull the bulb out it’ll work. Alternatively there’s 2 options, 1. Find a resistor and bridge the relay with the resistor 2. Easy option take a 4 prong led off Amazon and connect each print from the bulb to a positive node on the led then connect to ground and that should in theory fix it
Great bike build. I had MotoGadget MBlaze Pin's at the front and an integrated brake/indicator on the rear that cleaned the back end up quite nicely!
Relay is recommended, the provided resistors get really hot
Hi ....I got the same signals for my zx6r 2023 .. everything was good but when I turn it off front an back signals are not working (not flashing at all) even is not flashing in the display ... do you think is because I didn't install a flash relay?
They look really neat!
I went down on grass with my 05 and cracked/bent my fairing. I'll be doing a streetfighter conversion. Do you have solutions for mounting the speedo? I have the more round one. Also, what exhaust tips are you going to use?
I didn’t actually do the conversion myself unfortunately so I don’t really have an solutions to offer. As for exhaust tips I haven’t really looked into any as I might need to get something custom as all slip on are gonna be too long/ too expensive for what I want to do.
What kind of exhaust tips are you going to put on there?
How did they hold up over 3 years?
i always bump/ break... so i got suzuki 650 /under the fender /omg.. no gets bumped! looks like 2 in 1 round 2 inches.. with a tag spot.. i luv em... front leds $199 china filled up with water /not sealed :>(
great video! how do these turn signals hold up over time? I'm thinking of buying them, but the reviews say they die very quickly
hi my turn signals dont go all the way, what can i do to make them work fully??
What size wire connectors is it??
What do they look like in direct sun?
White zip ties on black plastic.... in the open..
hello i have a problem.. when i instal is flashing just first 2 leds not all 12 , but if i connect to the batery direct works full amd secvential .. why ??
You need a hyper flash relay most likely
@@ThatGuyTyy i have relay : DC12V , can fm flaser , 50 c/m - 200 c/m , 21Wx2+3.4w but i did't conect yet
hi I installed all 4 LED turn signals on my Yamaha yzf600r but all 4 turn signals light up when I chose left turn signal all 4 light up and the same when i chose right turn all 4 light up .. any idea how to fix ?? Thankyou.
Hey I ran into the same issue, if your bike uses the same dash light for both the left and right. Current will reverse flow through the bulb and cut on the the opposite side. If you pull the bulb out it’ll work. Alternatively there’s 2 options,
1. Find a resistor and bridge the relay with the resistor
2. Easy option take a 4 prong led off Amazon and connect each print from the bulb to a positive node on the led then connect to ground and that should in theory fix it
Any reason why the signal indicators and the signaling on the computer wouldn’t work when the bike is running?
Im having this issue l, and am looking at replacing my lights. Unsure if I have a bigger issue!
great video, but I installed it on my bike and the light was flashing very fast, can you tell me why?
Probably not the right signal relay for LED’s! I believe mine has an upgraded relay
Look on the forums, get a turn signal resister for like 10-20 dollars
fit a resistor to each indicator.👍
Hello, my problem is the led is flashing very fast
You need a led relay. If your bike doesn't have led lights stock you need to switch out the relay for the timing.
@@James-nh3ge hey, I have the same problem with my bike. Does it matter wich relay I buy, or do all relay for leds work?
or fit resistors
I literally have those exact same signals for my bike lmao
like father like son
Down to the river side
Can you put them in the front?
You could if you can make them fit I don’t see why not
Tried those and theyre garbage. Not even bright.
did you use additional cable
I did not need to no!
American: Here is an iPhone for scale 🥲