Nice tutorial. After this i went to catalog and selected one by one all the shapefiles giving them the wgs84 coordinate system but i can't see them projected. I mean if i add a basemap i can only see it, while before adding the basemap i could see the shapefiles
basemap could only use Geographic coordinate system WGS 84 or similar geodesic projection, or Web Mercator Auxiliary Sphere (available in arcgis under projected coordinate system list), using UTM is not recommended because UTM is not designed to project in global scale
which tool did you mean? if it is the split by attributes tool, it is implemented in the newer version of ArcGIS Desktop (started from 10.5 if I am not mistaken)
The cad didnt have coordinate nor georeferenced, consider to do vector georeferencing, I have one video tutorial about it, check them on my channel about vector georeferencing/spatial adjustment. Edit: The video link is on the one of my comment in this video page
You can reference it in autocadmap using rubbersheet or transform operator, or if you prefer doing it in arcgis, you can use spatial adjustment tool. If the data extent is correct, may be one or two control points are enough to make it georeferenced
here is a video tutorial about how to georeference CAD data in case your CAD or any other vector data is not yet georeferenced. ua-cam.com/video/i5xnpweSVaM/v-deo.html
Malam, mau nanya, untuk convert inset peta dan text gimana ya? Dari dwg ke shp, soalnya punya saya gak muncul, udh coba2 juga masih belum berhasil. Terimakasih banyak :)
Izin bertanya. Kenapa setelah saya berhasil import dwg ke arcmap dan sudah tersimpan di arcmap, file dwg yang diimport tadi itu saat dibuka tidak muncul objek apa-apa. Jadi seolah gambar di dwg itu pindah sepenuhnya ke arcgis. Apa ada cara buat ngembaliin gambar itu di file dwg saya?
@@GEO2004 file dwg berisi gambar udah disiapkan -> buka arcmap -> klik add data -> pilih file dwg yang akan diimport -> import ke arcmap berhasil dengan sub layer berupa annotation, polyline, point, polygon, dan multipatch. Nah masalah muncul itu saat saya buka file dwg itu melalui autocad, dimana object-object yang berhasil diimport tadi hilang dalam file dwgnya, jadi tidak ada gambar apa-apa Ada solusi?
Lha itu mah tidak diapa apakan filenya, hanya dibuka saja filenya, kalau ga kebaca di cad ya mungkin ada kesalahan di software autocadnya, coba di test di cad komputer lain
File DWG lu, kok menjadi 5 bagian bg? apa tiap object lu buat menjadi 1 file dwg bg? point 1 file di save, poliline 1 file di save lagi, apa bener begitu bg? klo pun tidak mengapa pada saat di buka di arcgis terpecah menjadi 5 bagian, dan bagaimana cara membagi nya? mohon pencerahannya
and how to convert multiple GIS Data (shapefile or any GIS format) to Single CAD File : ua-cam.com/video/qT3Fo2VM8bM/v-deo.html
Just in time! This is VERY USEFUL. Thank you very much.😍
You are welcome
Nice video. Easy and straight forward. Not like the rest of the bull**** found on youtube.
Thank you for the compliment,
extremely useful and brief! Thank you
i realize it's kinda randomly asking but do anyone know of a good place to stream newly released movies online ?
@Colt Corbin i dunno try Flixportal. Just google for it :D -ian
@Ian Jadiel thank you, signed up and it seems like a nice service =) I really appreciate it !
@Colt Corbin you are welcome =)
Nice tutorial. After this i went to catalog and selected one by one all the shapefiles giving them the wgs84 coordinate system but i can't see them projected. I mean if i add a basemap i can only see it, while before adding the basemap i could see the shapefiles
basemap could only use Geographic coordinate system WGS 84 or similar geodesic projection, or Web Mercator Auxiliary Sphere (available in arcgis under projected coordinate system list), using UTM is not recommended because UTM is not designed to project in global scale
Thank you so much🙏🏻🙏🏻
You are welcome
nice
Thanks
did you create this tool? I don't see it in Arc 10.4?
which tool did you mean? if it is the split by attributes tool, it is implemented in the newer version of ArcGIS Desktop (started from 10.5 if I am not mistaken)
There is an external extension created by some U.S agency. Here it is www.umesc.usgs.gov/management/dss/split_by_attribute_tool.html
Where you get the raw that you add in the target workspace
it is just a folder that accidentally has raw as the folder name
i already convert autocad to shapefile but after extract to arcmap, polygon showing not point of true location (out of nowhere). how to solve sir?
The cad didnt have coordinate nor georeferenced, consider to do vector georeferencing, I have one video tutorial about it, check them on my channel about vector georeferencing/spatial adjustment.
Edit: The video link is on the one of my comment in this video page
@@GEO2004 thnks for your kindness.
if the case was dwg data isn't referenced, how do we georeference it?
any explanation?
You can reference it in autocadmap using rubbersheet or transform operator, or if you prefer doing it in arcgis, you can use spatial adjustment tool. If the data extent is correct, may be one or two control points are enough to make it georeferenced
@@GEO2004 thanks sir, but hope u re gonna create tutorial video for it sir
All right, will do it
Here is your requested video ua-cam.com/video/i5xnpweSVaM/v-deo.html
malam bang, punya saya kok split by atrributes nya enggak nampil ya bang?
arcgisnya perlu diupgrade ke versi 10.5
@@GEO2004 altenatifnya gimana bagi yang pakai 10.4?
here is a video tutorial about how to georeference CAD data in case your CAD or any other vector data is not yet georeferenced. ua-cam.com/video/i5xnpweSVaM/v-deo.html
Malam, mau nanya, untuk convert inset peta dan text gimana ya? Dari dwg ke shp, soalnya punya saya gak muncul, udh coba2 juga masih belum berhasil. Terimakasih banyak :)
tergantung versi arcgis, kalau versi lebih baru biasanya lebih kompatible, sekarang udah versi 10.8
Izin bertanya. Kenapa setelah saya berhasil import dwg ke arcmap dan sudah tersimpan di arcmap, file dwg yang diimport tadi itu saat dibuka tidak muncul objek apa-apa. Jadi seolah gambar di dwg itu pindah sepenuhnya ke arcgis.
Apa ada cara buat ngembaliin gambar itu di file dwg saya?
Weh kok aneh, seharusnya arcgis tidak bisa mengubah data dwg apalagi menyimpan, coba prosedur menyimpan di arcgis yang anda maksud itu kayak gimana?
@@GEO2004 file dwg berisi gambar udah disiapkan -> buka arcmap -> klik add data -> pilih file dwg yang akan diimport -> import ke arcmap berhasil dengan sub layer berupa annotation, polyline, point, polygon, dan multipatch.
Nah masalah muncul itu saat saya buka file dwg itu melalui autocad, dimana object-object yang berhasil diimport tadi hilang dalam file dwgnya, jadi tidak ada gambar apa-apa
Ada solusi?
Lha itu mah tidak diapa apakan filenya, hanya dibuka saja filenya, kalau ga kebaca di cad ya mungkin ada kesalahan di software autocadnya, coba di test di cad komputer lain
@@GEO2004 oke saya coba test dulu
File DWG lu, kok menjadi 5 bagian bg? apa tiap object lu buat menjadi 1 file dwg bg? point 1 file di save, poliline 1 file di save lagi, apa bener begitu bg? klo pun tidak mengapa pada saat di buka di arcgis terpecah menjadi 5 bagian, dan bagaimana cara membagi nya? mohon pencerahannya
Dwg yang asli emang gitu bre, ada beberapa bagian, cuma emang ga kentara aja kalau dibuka di CAD. Cara membaginya di CAD maksud lu?
@@GEO2004 TQ Bg, jadi data export dari CAD ke arcgis itu default nya akan otomatis terbagi jika di buka pada arcgis.
Asyiiiapp