Super nice video! Just wondering. Did you use the entire bottle of 1L oil? Or just half of it? Just to know if I need to pour the entire 1L oil. Thanks!
A very simplistic oil change, gasket sealant is the stuff to use if you don't have an O ring, not glue and certainly not all over the housing and inside! You forgot about warming the engine, removing the oil filler cap to stop fluid vacuum, cleaning screen near exhaust, checking level after short run, these engines should take a litre of oil but you gave a half measure for some reason? Basic stuff really! I wish people wouldn't do these "DIY" vids when they don't know what they are doing... should have a disclaimer!
hello james, yes,i haven't mention the checking the oil level and engine warm up. i will mention that in the description. Removing the oil filter cap and cleaning screen near exhaust.i don't get it. i have used the whole oil bottle of oil (1L).yes i didn't mention it too.i will mention that in the description too, Talking about DIY if you do DIY you save money.even you do DIY'S in your life bro. I see DIY AS a good platform to increase your knowledge and experience.but the thing is you have to do it right.''EFFECTIVENESS"=doing things right as "Peter Drucker" said. I have been doing this for years now.so i know what i do but i accept i haven't mention some important things. so thank you James Macdonald for your great feedback.
@@mathews-e5418 Its basic stuff, the oil strainer is on right hand side behind near stand mount and exhaust pipe, you will need to lift floor board for tight access and have oil drained... there is a plastic mesh tubr which can be wiggled out, clean off with parts cleaner, check for holes and debris before refitting.
Very nice👍
Very Good
Please make a video where you show me how i can change the candel . Tank you
Good video, thx.
welcome xodrinker..
very nice your video.
can you also show how to change the candle?
Hello emme,
I will upload a video about that emme.
Super nice video! Just wondering. Did you use the entire bottle of 1L oil? Or just half of it? Just to know if I need to pour the entire 1L oil. Thanks!
And how many kms could I do once I've changed the oil till the next oil change? Thanks!
Great video!I have a et4 125 "1999".Do i follow the same steps as in your videos?
Yes if you follow you will not harm your vespa !!
Hello mitsos,
Thank you for the feedback.if you can follow the steps it will keep your scooter away from damage.
Atleast use OEM products.
Where do you need te fill the oil on a piaggio sfera 125cc 4stroke i don’t have a dipstick
3:30 shows you the sight glass, there will be marks on that to show you correct oil level
Hey - is the seal glue necessary when I have a new o ring for the Oilfilter change ?
Hello patrick, you don't need to use a seal glue if you have a new one.
#patrickgustyn .Thanks for the feedback.
Absolutely not
there's another screen filter on the other side that you didn't cleaned!
Hello lim,
Thank you lim for the feedback.
can you take a screenshot and E-mail to Shenarkw@gmail.com .
@@junktv1962 I've sent you the pictures.... near exhaust pipe.... under stator flywheel fan.
Bro plz how can I get intouch directly to you thanks
Shenarkc@gmail.com
Email
Where can i buy it? On Amazon? Do you have a link?
What Do you mean brother?. OIL FILTER?
How much oil do you need to pour?
1L can is enough..
A very simplistic oil change, gasket sealant is the stuff to use if you don't have an O ring, not glue and certainly not all over the housing and inside! You forgot about warming the engine, removing the oil filler cap to stop fluid vacuum, cleaning screen near exhaust, checking level after short run, these engines should take a litre of oil but you gave a half measure for some reason? Basic stuff really! I wish people wouldn't do these "DIY" vids when they don't know what they are doing... should have a disclaimer!
all these points are great, James. any chance of some links to a video showing a more thorough walkthrough?
hello james,
yes,i haven't mention the checking the oil level and engine warm up. i will mention that in the description.
Removing the oil filter cap and cleaning screen near exhaust.i don't get it.
i have used the whole oil bottle of oil (1L).yes i didn't mention it too.i will mention that in the description too,
Talking about DIY
if you do DIY you save money.even you do DIY'S in your life bro.
I see DIY AS a good platform to increase your knowledge and experience.but the thing is you have to do it right.''EFFECTIVENESS"=doing things right as "Peter Drucker" said.
I have been doing this for years now.so i know what i do but i accept i haven't mention some important things.
so thank you
James Macdonald
for your great feedback.
Should be fully synthetic oil on these motors.
@@mathews-e5418 Its basic stuff, the oil strainer is on right hand side behind near stand mount and exhaust pipe, you will need to lift floor board for tight access and have oil drained... there is a plastic mesh tubr which can be wiggled out, clean off with parts cleaner, check for holes and debris before refitting.
@@jamesmacdonald3090 I have mentioned it correctly brother.