Introducing... The New Treadle Hammer Kit! (Plus Q & A)
Вставка
- Опубліковано 19 тра 2022
- We have a treadle hammer kit available at our website at www.christcenteredironworks.c.... Also you can find the treadle hammer kit and more of our blanks at our landing page: www.blacksmithingblanks.com. This video goes over it's features!
Join this channel to get access to perks:
/ @christcenteredironworks
--------------------------------------------------------------
Want more Christ Centered Ironworks?
--------------------------------------------------------------
Want to SUPPORT what we do here at Christ Centered Ironworks Blacksmith Channel?
Visit my channel: / christcenteredironworks
Stop by my website: www.blacksmithpdfs.com
Get some merch: teespring.com/stores/christ-c...
Shop my Amazon Influencer page for shop tools: www.amazon.com/shop/christcen...
Social: / christcenteredironworks - Навчання та стиль
Great kit, great value! Thanks for all you do to bring the "cost of entry" down for the blacksmithing community
Thank you for the support and kind words!
Cood design - I like it. Everyone is a critic, especially those who have the full gamut of tools at their disposal. Just having the tool for the purpose it was intended is sometimes all you need. Great work.
Never built or even used a treadle myself, but from all the designs I've seen online this one seem extremely energy efficient
I can't wait to see the power assist version!!!! Keep that ingenious mind turning, Roy! I love it!
I'll do my best to keep the good ideas coming 🙂💥🧠🤯 thank you for watching
Saving my lunch money for this baby!
Definitely need the extra hand in the smithy. Thank you so much for your neverending quest to improvement in the small shop small budget smithy's!
God bless and keep y'all now
Crawford out 🙏🔥⚒️🧙🏼♂️
God bless you Mr Crawford for all your constant support ❤️
@@ChristCenteredIronworks yes sir! Btw I got a package in the mail! Thank you so much 💜💜💜😇
I love the design!! I don't have a big enough piggy bank yet but once I do I'll buy it! It sure would be handy to have some extra power in my shop.
Thank you 😊 May God bless your piggy Bank ❤️ and who knows maybe I'll even giveaway a few in a Livestream sometime...
Great video Roy. Very nice plans. Keep up the great craftsmanship and hard work my friend. Forge On. Fab On. Weld on. Keep making. God bless.
Thank you Jared God bless you as well 🙏
But..but I wanted further ado! Lol That's a nice kit Roy.
LoL without further Ado 😉
Time to start saving my duckets and figuring out what structure I’ll have to build in my smithy to support this treadle hammer. Great work, Roy! Thanks for thinking about us small shops.
A stand-alone alternative build would be awesome, I'd love to get one of these but I don't have a shop to build around it, haha. Great engineering, well done!!
Awesome kit. No special tools needed! Excellent design.
Thank you Rob for the support and watching brother 😊
Every time I see it I wish I had a shop to put it in. I know, you hear that a lot too. Very good design!
It works well in living rooms as well 😜 great conversation piece
Simple and effective design. I think rounding out the hammer face to be ball shaped may help with striking angle, but raises complexity and other striking issues. (yes issues with striking, but pun accepted. what is that a double entandre-something?).
Nice design they are handy to have around
Thank you 😊
Beautiful design, hope to be able to afford one soon. Keep up the great work. Absolutely love your videos and have learned a lot from you. God bless and have a wonderful day.
Thank you and I will keep em coming 🙂
Thank you for everything you do.👏👏👏🤞🙏
Thank you Wayne God bless you sir 🙏
Can't wait to get my hands on one for sure!!
Thank you sir for all your support 🙂
Great product!! Looks amazing!
Thank you James
do this is the type of video I enjoy because I try my best to create the tools I need for learning this skill, obviously though I cannot make every tool is use I know that....especially in my main trade as a jeweler. I am expanding my skills in learning basic blacksmithing skills making knives and straight razors I chose these 2 because I can readily use my skills as a jeweler and artist and embellish the handles.
Just bought. tyvm cant wait to get it in!
Awesome 👍 I'm sure you will enjoy it 🙂 thank you for the support God bless you
looks great!
Looooove this. Starting to save my pennies 👍👍👍👍👍👍
Looks good ,can't wait for the next new items you got coming.
I'm looking forward to it too 🙂
Still gonna get one for certain...just need too focus on moving first. Keep doing great stuff Roy...👍🏽😘
Thank you sir and May God bless you on your move 🙏
Very nice design 👍
Thank you 😊
I've been a carpenter all of my life. I couldn't tell you the number of times I was asked to do something for free or 1/2 price. Other carpenters trying to stand around me to see how i do things. Or an older but a goodie. I'll give you a hand lol
Don't get me wrong. If there was an old couple that needed something fixed toilet, water problem, water leek, I would help them before I'd do the paying job.
Now I'm only 56 and my body is shot!! GOD wants us to rake care of our family.
If you pass on a job no worries there's another one on the way.. GOD Bless you all😇
This is great a Roy Hopefully I can purchase this from you in Aug.
That'll be awesome ☺️ thank you for watching And always taking the time to comment 🙂
You could even add hinges and turn it flush against the wall for storage
Definitely could be a good upgrade if you can make it sturdy enough 😊
2×4 is 1 1/2" × 3 1/2"
Thank you Bill 😊
90 x 45 in metric countries, yes I know its a little larger but that is a standard stud size here!
I gotta hurry and save up. I need this! Like no kidding lol. I'm at a point where I need to speed up the bigger projects and this is so near perfect! 🍻
Thank you for the support and watching 😊 it's going to be even better in a couple of months when I add the Air assist...
@@ChristCenteredIronworks I'll be tuned in!
Any idea how much sound it generates? I would suggest measuring decibels when running around 30 strikes per minute from 20 ft away like used for generators, perhaps? My muni code specifies how much 'noise' may acceptably cross a property line.
No Idea what DB level It would be but I imagine it will depend on how noisy your anvil or striking surface is
I'm going to get one later this year.
Thank you for the future support 🙂
Great no nonsense option.
Thank you that's what I was hoping for 🙂
You are an engineer!
Thank you 😊
I really like the product! Maybe I missed it but do you have any videos of hole punching with this? Like a 1/4" hole through 1/4" flat bar or similar?
Not yet but it's completely capable of doing so 🙂
This looks like a really great setup! I know some of it will depend on the sledgehammer used, but what's the approximate distance from the 4x4 to the head of the hammer? Trying to figure out if I can squeeze this into my shed; a press or power hammer is likely overkill for the small hobby stuff I'm doing, but this looks like it could be exactly what I need!
It's just about 40" 🙂
And of course on a re-watch, you absolutely call this out at the 1:30 mark in the video 😅 Appreciate the reply, need to move a couple of things around but it does seem like it's going to fit, I like that you can put it up out of the way when not in use as well!
We are planning to buy some rural property and move out of the city. Right now, I am not in a position to buy this, but I hope to in a year or so. Perchance, do you have veteran discounts?
I like your system. May i ask in the use of this what is the difference between this hammer and air drive vertical hammer in respect to type of work each can do. Ì like you I work on a very small budget in my shop so I may teach the young kids about this art. I like. The hammer a lot but at this time I do not need 2 tools doing the same job. Hope this made since. How can I hook up with you so I can send pics or my stuff.
God's speed my friend
Stan
This could very well be a solution for me. I'm recovering from surgery on my wrist, and my other wrist is on it's way out. This might be a way for me to be able to work hot steel again.
i want one of these for myself but i live in Canada. is there any way that i can get this shipped here for a decent shipping price???
Contact us through our website and we can calculate the shipping for you.
thank you sir
Hi what is your warranty unit
I'd love to buy one of your kits but I can't afford $500 I can barely afford 50 dollars if there's people in the comments that are like me and can't afford the $500 Big dog forge on UA-cam made an amazing treadle hammer and it probably only cost about 50 bucks I built one just like that one and I've been using it for about 4 months now it's working really good 👍🤓👏
Roy, that's a pretty neat kit but it would look better if you were able to get proper length bolts. I think it's kind of ugly with long bolts where they don't need to be and too short of bolts where they don't stick all the way through the nyloc nut.
I wonder how hard it will be on a 2 X 4 wall with all the vibration.
God bless you, your family and your business!
Thank you for the input 🙂 the reason why the bolts are long is because I needed it to go completely through the hammer area so that the threads won't be battered By the hammer handle... You can always shorten those.. The ones that appear too short are actually proper length just backed out a bit to adjust the friction and operation of the hammer... God bless you and your family as well 😊
@@ChristCenteredIronworks ah that makes sense. Good idea about the bolt shank.
God bless you!
Hast du einen Bauplan für mich? Danke
yeah I'm the first to comment howdy everyone
Hey Tom 😁
And the 1st to get to play with the new toys!
😂 I'm jelly! Giggle 🤭
Blessings Thomas and family! And Roy n family!
Crawford out 🙏🔥⚒️🧙🏼♂️
Well, gotta say. I now have to save up some money so I can swing it your way to get the kit. Also, "flux" the nay sayers, I'd rather buy from you then buy from out of country ( or, knowing my bad luck, accidentally cobble together a death machine).
Thank you for your kind words brother and the future support ☺️
Класс!
Sorry I'm not bilingual....
Class
Hmm. Too bad everybodys poor. Good luck selling.
Im still tired of sales pitch videos. Wish youd just use the tools. Therapeutic watching forging.
Got 1700 videos on UA-cam that I'm sure you haven't seen.... Most of them are only instruction And forging.. I'll post whatever I like Thank you very much!
Roy worked hard on making this tool, if he doesn't make sales pitch videos how is he going to sell it?
Travis please, get over it, Roy has worked hard to get this out to smiths who don’t have fabrication skills to design and build their own, its a good option if you have a want and need and just want a simple start to heavy hitting machines! I wont buy one, don’t need, I have the skills and equipment to build one, actually thinking of adding a treadle hammer “attachment” to my power hammer! I say well done to Roy, Im sure they will sell, its a great addition to any small smithy!
Without advertising the products, it's gonna be hard to sell them. As such is the case, sales are quite the necessity to do little things like keep the lights on and feed the wife and children, not to mention create and edit the video content you do like to watch for free.
I do hope your having a good day each and every following day to come.
Blessings now
Crawford out 🙏🔥⚒️🧙🏼♂️