You’re too kind! I strive to be the best mentor I can be, and it’s rewarding to see your growth. Your dedication and curiosity make it easy to support you. Keep up the great work!
@13:55 Flicker comes during shooting under LED lights is not because of power of Leds but because of the frequency of the supply line which is 50 Hz in India.
@4:56 correction: जो एक second में दिखना था वह देखने के लिए 2 seconds लगते हैं ( in slow motion). और super slow में सिर्फ पलक खुलती देखने में ही 6-7 seconds लगेंगे ।
thank you....bahut acha se clear ho gaya...maam mera ek question hai...kya insta x3 ka 150 degree shots kya mai dslr ka video mai attach kar sakta hoon?with same settings.
Why does 24fps feel “cinematic”? Historically, 24fps became the standard frame rate for movies and television because it used the lowest amount of film while achieving natural motion to the human eye. Now, it is more of an artistic choice to emulate the look of “film” and maintain a disconnect from the hyper-realism that you can achieve with higher frame rates like 60fps and 120fps. Non-drop frame In the non-drop frame method, the frame rate is specified as a whole number, such as 30fps or 60fps. This means that each second of video is made up of exactly that many frames, and the frames are displayed at a consistent rate. Drop-frame In the drop frame method, the frame rate is specified as a fraction, such as 29.97fps or 59.94fps. This means that the actual rate at which frames are displayed is slightly lower than the specified rate, and some frames are “dropped” in order to maintain a consistent rate. This method is typically used when the video will be broadcast over television, where the frame rate must be synchronized with the broadcast signal. In general, the drop frame method is used to maintain a consistent frame rate in situations where the actual frame rate may fluctuate slightly. This can be important for ensuring that the video appears smooth and natural to viewers.
बहुत सुन्दर प्रस्तुति दी आपने बहुत अच्छा। Thanks for sharing
Mam photography ke aap best Teacher h aap video dekh ke bhut kuch sekhe h
Very informative vdo .❤
You’re too kind! I strive to be the best mentor I can be, and it’s rewarding to see your growth. Your dedication and curiosity make it easy to support you. Keep up the great work!
Zabardust
Thank you for your help And Good advice bahut atcha season hai ❤😊👍 thank you so much
Excellent presentation
Thanks a lot
@13:55 Flicker comes during shooting under LED lights is not because of power of Leds but because of the frequency of the supply line which is 50 Hz in India.
I love this series. Learned a lot from you. Thanks😍
@4:56 correction:
जो एक second में दिखना था वह देखने के लिए 2 seconds लगते हैं ( in slow motion).
और super slow में सिर्फ पलक खुलती देखने में ही 6-7 seconds लगेंगे ।
🙏🙏. Dhanyawad mam
Wow yahi to chahiye tha Mam's ❤
Well informed. Thank you.
So well explained 👏👏👏
Love you meam this class is very very nice ❤❤❤❤❤❤🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
🙏, Mam, heartiest appreciate, u r the one who explains very nicely with easygoing explaining, kindly keep itup, good luck, Regards, Neetu Sharma
Superb analysis dear
thank you....bahut acha se clear ho gaya...maam mera ek question hai...kya insta x3 ka 150 degree shots kya mai dslr ka video mai attach kar sakta hoon?with same settings.
ગુડ જોબ..
Thank you so much ma'am 🥰🙏🙏🙏
❤❤❤
Photo shop & Light room practicals ...ka course available hair to batayiye..
Thanks mam
👍
ખુબ સરસ માહીતી શે એક વખત બધા સાભળ જો ,જે નવાનવા વિડીયોગ્રાફર શે એમણે ખાસ જરુર શે
❤❤👌👌
Mam motion photography ke baare me thoda btaiye plzz🥺🥺🥺
Mam aapane wedding Mein f 1.2 aperture ko Kahan kahan istemal Kiya Hai 1.2 ka Lance Le Lun ya 1.4 ka lo wedding ke liye
Madam Mera canon r10 hai me jab photo utha rahai to Jahan par light hai woha par black dikha raha hai
Mam wedding videography ke liye aspect ratio kitna rakhna chahiye?
Bhai 16:9 best aspect ratio hai.
@@Nadeemqazi_10 thank you
Mem me weding karta hu mujko kitni satarsipd ragni hi
Mere DSLR se only 72 dpi ki image bn rhe h... Isko increase kaise kre. Pls. Help.. ❤
Mam me aapki video ko 2x me dekhta hun kabhi kabhi 😂
Pal india me karana hai
Please madam help 1:19
Why does 24fps feel “cinematic”? Historically, 24fps became the standard frame rate for movies and television because it used the lowest amount of film while achieving natural motion to the human eye. Now, it is more of an artistic choice to emulate the look of “film” and maintain a disconnect from the hyper-realism that you can achieve with higher frame rates like 60fps and 120fps.
Non-drop frame
In the non-drop frame method, the frame rate is specified as a whole number, such as 30fps or 60fps. This means that each second of video is made up of exactly that many frames, and the frames are displayed at a consistent rate.
Drop-frame
In the drop frame method, the frame rate is specified as a fraction, such as 29.97fps or 59.94fps. This means that the actual rate at which frames are displayed is slightly lower than the specified rate, and some frames are “dropped” in order to maintain a consistent rate. This method is typically used when the video will be broadcast over television, where the frame rate must be synchronized with the broadcast signal.
In general, the drop frame method is used to maintain a consistent frame rate in situations where the actual frame rate may fluctuate slightly. This can be important for ensuring that the video appears smooth and natural to viewers.
Shutter Speed Badhane se Flicker Ghategaa yaa Badhegaa. ??? 25 par Flicker kam hogaa or 50 pe badhegaa ya iskaa ultaa hogaa.
❤❤❤