I think the end result is stunning. The orange sapphires spinning in the center ring, while the rest of the ring stays steady. It's so cool to see the process which obviously involves planning and math. Very well done!! Congratulations on another work of wearable art. 👏👏👏👏
Thanks! That sander is one of my favorite tools :) I got it from Pepe tools. Here’s a link to it. pepetools.com/products/power-belt-sander-flexshaft-attachment?variant=43487731744942¤cy=USD&gadid=&gad_source=1&gbraid=0AAAAADo-zVN5jBeUx5dPo57SwPOh2PMvW&gclid=Cj0KCQjwwuG1BhCnARIsAFWBUC0gM33wyAZ_kXQk8OLovl2-veXrc85gInxxvcovkCIDTjApfqFEwVoaAqNAEALw_wcB
Very impressive, great job.. i have a question, wouldnt be enough to stretch out the inside gold piece? To secure those damascus pieces? Maybe not if you are doing spinning middle.. 🤔 (unless those two rings would have slightly smaller diameter) anyway nice to see something different, if i ever find some teacher, someone with right tools i had planned couple rings, out of multiple pieces and materials and honestly pins are way to go.. anyway thumbs up, sir!
I actually did make the outer pieces smaller than the spinner and I did pin them by stretching them into place. I was worried that over time they would drift when it gets banged up against things. If it was just a normal one piece thing with a liner, I think a friction fit would be just fine.
Hello! Iv been watching quite a few of your videos, curious if you modified and resize rings if they are shipped to you? I’m unfamiliar with this process as iv never done it. I have a family engagement ring id like to change for my use, and I’d like to find someone such as yourself to do the work instead of a large store. Let me know if this interest you!
Most definitely I do that all the time! Feel free to call me or send me a message through my website www.changeyoucanwear.net. I’m currently gone on a backpacking trip but I should be back in a few days. If you call and I have service, I still answer though :)
Good work and high precision. Greetings from italian goldsmiths
Thank you!
This looks amazing. You should make your website a actual link in the description it makes it easier to get to and people are more likely to go to it.
Usually it does it on its own I thought. I literally have no idea how to do it :)
I think the end result is stunning. The orange sapphires spinning in the center ring, while the rest of the ring stays steady. It's so cool to see the process which obviously involves planning and math. Very well done!! Congratulations on another work of wearable art. 👏👏👏👏
Thank you so much!
Just stunning mate. The journey from coin rings to fine jewellery is wild!
Thanks! It has been a journey for sure :)
You've stepped up your game considerably. Most excellent 👍
Wow, thanks!
Great looking ring
Thanks!
such detail, fair play
Thank you!
There are so many different techniques in this ring 😮, simply amazing result 👌🤩. Thank you for sharing with us 😁.
Is etching solution ferric chloride?
Thanks! There were a lot of different techniques in this one. Yes it is ferric chloride.
NICE THE RING IS AWESOME just wondering what kind or name of the small belt sander you used
Thanks! That sander is one of my favorite tools :) I got it from Pepe tools. Here’s a link to it. pepetools.com/products/power-belt-sander-flexshaft-attachment?variant=43487731744942¤cy=USD&gadid=&gad_source=1&gbraid=0AAAAADo-zVN5jBeUx5dPo57SwPOh2PMvW&gclid=Cj0KCQjwwuG1BhCnARIsAFWBUC0gM33wyAZ_kXQk8OLovl2-veXrc85gInxxvcovkCIDTjApfqFEwVoaAqNAEALw_wcB
Very impressive, great job.. i have a question, wouldnt be enough to stretch out the inside gold piece? To secure those damascus pieces? Maybe not if you are doing spinning middle.. 🤔 (unless those two rings would have slightly smaller diameter) anyway nice to see something different, if i ever find some teacher, someone with right tools i had planned couple rings, out of multiple pieces and materials and honestly pins are way to go.. anyway thumbs up, sir!
I actually did make the outer pieces smaller than the spinner and I did pin them by stretching them into place. I was worried that over time they would drift when it gets banged up against things. If it was just a normal one piece thing with a liner, I think a friction fit would be just fine.
Hello! Iv been watching quite a few of your videos, curious if you modified and resize rings if they are shipped to you? I’m unfamiliar with this process as iv never done it. I have a family engagement ring id like to change for my use, and I’d like to find someone such as yourself to do the work instead of a large store. Let me know if this interest you!
Most definitely I do that all the time! Feel free to call me or send me a message through my website www.changeyoucanwear.net. I’m currently gone on a backpacking trip but I should be back in a few days. If you call and I have service, I still answer though :)