Under $20 diff lock(lawn tractor)
Вставка
- Опубліковано 22 лип 2024
- How to increase lawn tractor traction(under $20 differential lock).
This time I am locking a lawn tractor transaxle, this will work with almost any differential to increase traction, but it will be harder to steer the vehicle. I replaced the grease with gear oil for better lubrication and cooling.
Thanks for watching.
Please consider subscribing:
ua-cam.com/channels/CEk.html...
DISCLAIMER:
Crankshaft garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Crankshaft garage recommends safe practices when working with power tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Crankshaft garage. This video is for intended for entertainment purposes only. - Авто та транспорт
Man of few words and many skills. Solid video!
The torq-headed bolts on the bull gear that hold the spider gear casing to the gear are always mushroomed on the opposite side of the bolt heads. Instead of grinding off the heads, grind down smooth, the other side. Then the bolts will come out easily and can be reused when reassembling.
Thanks for the tip!
This is the same cheap way to convert a passenger vehicle to positive traction. Simply bind the mechanism that allows for the "differential" action between the two wheels and you got it.
Great work. Well done.
Adding dual wheels would give you same traction as posi and a lot easier. I’m fortunate to have found dual wheel adapter on fb market. You have to have threaded holes on plate on one end so you can bolt rims on, cause inner tire blocks access - money to be made mass producing them. I’ll try to post pic of them.
Great video man!! Really helped
Thanks for watching! Glad to hear it helped.
Good luck trying to make a turn
just a heads up, torch the main gear bolts and they will come out pretty easy
Most diff bolts are reverse threaded so have to tighten to get loose
hello, something jumps in my transaxle, it sounds very loud and that's how I would like to do it too, to weld it like that. What do you think?
It’s all flat land here so I don’t see a reason to change it but for hills and such yea it makes sense
In the offroad community we call it a lincoln locker (lincoln the brand of welder).
Not sure if you are suppose to put gear oil in those transaxles, I think it is just grease.
I would be interested how long that held together. "Sintered Steel" (such as those spider gears) "usually" don't take kindly to being welded
Hi, Crankshaft Garage. I hope you see this comment. I have the same transmission axle aetup that you do. I can see you welded the spider gears to the pin. But did you weld the pin to the axle gear? I can't really see in your video. Please let me know, thanks.
Where did you buy the brush? And it’s name. Can’t find the right stiffness. Thanks.
Est-ce aussi efficace de reçulon que d'avant?
I'm sure your lawn will thank you...around turns....
Did you use that entire bottle of gear oil?
Good call on the gear oil, does it leak? I was thinking about adding a fill plug only to mine. If it does leak, how bad? Let me know please, I may deal with the leak if it's not a mess. Thanks for the video.
Don't pay attention to people saying you can't weld stuff together, I've welded plenty of things that shouldn't be welded, they hold, sometimes.
Does it turn...?
You can broke off your transcase, you need to fill it with EP-0 grease. Maybe 85-140 + heavi duty grease will eork the same, i dont know. Practice will show, who was right, engeneers/you.)😊
This is safe? it can break😮?
If it was turned into a Limited Slip posi instead of full posi, would it be easier to make sharp turns?
No. It'll only make it less likely to tear your grass, that's why they come with open diffs.
Lincoln Lockers
How did you keep the shafts inline to run true?
instaBlaster
I didn't appreciate how rough you were with the top trans mount bolts that go into aluminum threads. Just ran them in with the impact 😢
Trying this in mine right now. For some reason, even though I put the tourque wrench to 15 ft lbs, I’ve stripped 2 bolts out and when all the bolts are loose, the axle spins, but when I tighten them, the axle won’t spin. Anyone have any advice?
hey mate, check for wear on the bolts and if your missing spacers or washers👍
Nate Levi thanks!
No worries mate
I know this is four years late but if you welded anything to your axle gear to keep it from spinning you should have checked it in Lower housing bearings and spun it to make sure everything was True before you bolting it together. If you see this, let me know what happened. Also does your lawn tractor turn like it used to, or does it push???
No way could I do that - I wonder how much someone would charge to do that to my 73 Sears st16
what is the function of that one little ball??
Try putting that ball on the bottom like he did. It won’t allow the housing to seal properly. The shift rod bearing is missing on the backside of the shifter. That ball belongs on the top of the shifter, with the spring being inside the top allen fitted screw.
any issues with making sharp turns?
Nope, just you can't do them anymore 😉
Crank shaft garage what mower did that transaxle come out of
Este salio de un tractor corta césped mtd
Hydro or varidrive @@melanimontolla5886
What year lawn mower and rear end model number
The year and model wouldnt matter much. This transmission is in several makes and models. It's a cvt transmission, not hydrostatic. If your mower has a gear shifter with forward,neitral,and reverse then this is most likely the one you have. There was probably different models that had subtle differences like mounting tabs,connection point differences, etc,but the guts would be the same.
Tokyo Drift.
Jaki to ma sens?
Itll get excellent traction in forward or reverse, but itll tear up a lawn making sharp turns. You're better off buying better traction tires
Задний мост от Ваз ставь и будет тебе счастье...потом мотор и коробку....Лучше готовый купи дешевле будет
SLAVA UKRAINI 🇺🇦
Craftsman?
There's like 4 brands that use this rear end
So what 🤣
too much welding flash footage.. not enough information explained ... waste of my time:(