Tsurumi HS2.4S Residue Kit Installation

Поділитися
Вставка
  • Опубліковано 1 гру 2024

КОМЕНТАРІ • 7

  • @jayrluciano3304
    @jayrluciano3304 10 місяців тому

    Great Video , Thanks

  • @captainover-tighten6729
    @captainover-tighten6729 2 роки тому

    Hi, the pump's other bolts, are they installed with a sealant or Loctite? I had to replace the mechanical seal. Thanks

  • @rajb88
    @rajb88 4 роки тому +1

    Hi - just wondering if this residue kit is compatible with HS 2.75S? Or is there an equivalent part for it?

    • @imperialsalesinc.3956
      @imperialsalesinc.3956  4 роки тому +1

      Although Tsurumi does not make a residue kit for the HS2.75S, we have actually installed this residue kit on the HS2.75S. However, you will notice that the stock agitator on the 2.75S sticks out past the bottom of the residue kit when installed with the plastic spacers and steel washers. There are two options to account for this: You can replace the 2.75S stock agitator with the agitator from the 2.4S which is shorter, or you can add spacers to the residue kit to push it past the 2.75S agitator. You will have to find similar spacers at your local hardware store. Please keep in mind that this is a workaround and Tsurumi Pump will not warranty such an installation. But, based on our experience, it does work. Let us know if you have any other questions!

    • @rajb88
      @rajb88 4 роки тому

      @@imperialsalesinc.3956 Thanks guys for the reply and the workaround, much appreciated!

  • @israeldaconceicaoalves9897
    @israeldaconceicaoalves9897 4 роки тому

    preciso da helice da hs2.4 s não estou encontrando.

    • @darenkaneshiro8107
      @darenkaneshiro8107 4 роки тому +1

      Israel, are you looking for the impeller or the agitator for your HS2.4S? If so, you can order those directly from Tsurumi Pump. Here are the links: impeller - www.tsurumipump.com/parts-impeller/, agitator - www.tsurumipump.com/parts-stirrer/. I hope this helps.