B&W cdm 7nt treble

Поділитися
Вставка
  • Опубліковано 18 жов 2024

КОМЕНТАРІ • 9

  • @djrevcoupstunes1457
    @djrevcoupstunes1457 Рік тому

    That tapered tube needs to be glued into the correct /exact placement on to the back of the tweeter, otherwise if that tube is not connected to the back of the tweeter, it will sound like the tweeter is not operating as it should. I had the same issues with my speakers. 1 of the loudspeaker channels was not emitting high frequencies. I heard something rattle about inside the loudspeaker enclosure. It was the tapered tube. The tweeter slips out of the housing/location almost freely. I could see where the tube connected to the tweeter because I could see where the glue had separated and had left a shaped imprint behind. So I used superglue to reattach it perfectly. I put the tweeter back in its housing, resembled the rest and gave it a test.. Hey presto, it worked perfectly. What I did find out was the tweeter would not function correctly, if at all without the tube connected correctly in place.

  • @jamesmadison4760
    @jamesmadison4760 5 років тому +1

    Thanks for sharing, I need to repair mine also.

  • @KhanhNguyen-ft1vb
    @KhanhNguyen-ft1vb 6 років тому

    minh có đôi dt b&w CDM 9nt mà bị chết treble có thay được ko bạn

    • @tuananh-wk4tx
      @tuananh-wk4tx  6 років тому

      Khanh Nguyen thay dc ban nhé phải mang đến đại lý uỷ quyền của hạng

    • @tuananh-wk4tx
      @tuananh-wk4tx  6 років тому

      Khanh Nguyen mình có một cái tredle cua cdm7 /9 vẫn kêu chỉ buồn là nó đã bị rách màng

  • @gordonsgoodhealth4932
    @gordonsgoodhealth4932 4 роки тому +1

    Not interested in you messing with the internals of the speaker