Man, what I would pay to have a decent, ready made system like this that would output the tank level and water usage over time - to a mobile app... I've been looking everywhere online to buy.
I want to install soner sensor on top. My top ground to third floor so can I use long jumper wires ground to third floor so sensor work properly by too longest wires mean ground to third floor till?
Nice project and a very clear, detailed and professional presentation! I learned exactly what I needed to possibly attempt this build. (What I want to do is add an Automatic Aquaponic Greenhouse Fish Tank Water Level Controller to a customized Open Energy Monitor platform.) This video is pointing me in the right direction. Thank you!
bro, add a thermistor to make the ultrasonic sensor more accurate. currently, the sensor doesn't take into the effect of temperature and humidity into account. Also, please send me the gerber file. Thanks in advance
Brother you showed us different connection (probably wrong one) because what you shown in the video I tried that but there are some missing connection. And there is a huge difference between your PCB design and mine but I tried same as yours not woth it. So, kindly will you provide schematic diagram.
Hi I will build this project soon for my son salt water aquarium. I want the system to trigger the filling when water level is 90% and not 20 % , where in the program I need to change the value from 20% to 90%? Thank you Dov
If you don't mind Dear can you give me suggestion for dry run i mean is present is sump tank empty with dry run means same one more sensor to keep the pump flow end we will keep a sensor after 2 to 3 minutes if no water flow means it should act and shutdown pump
Can i use this with water tank on the roof top of the apartment? Water tank is made of stainless type. I want to have a system that sends message to my phone when water in the tank reach unsatisfying level.
Sir if any emergency we need to on the motor isn't possible even the water is on 50% at the Tank. So kindly add manual switch code for operating manualy.
Hello Akhil, I ordered the PCBs soldered everything as said and configured the nano. But the display is giving square boxes. Did I make any mistake. Please lemme know. Thanks in advance.
Great its working. im using it on a fish tank. i want the tankhight to be 20 cm and the top of the tank to be 15 cm, so i want the pump to switch off when the water line is 15 cm from the ultrasonic sensor. how can i set this
Where is the circuit diagram. I cant find in the link that given in the discription also.please provide a clear and good circuit diagram please... I want to do this project..please help me😥.hope you will reply
would it possible to use two ultrasonic sensors instead of one. I mean one on tank and one on sump, this way it is possible to protect dry run and also additionally know the sump water level at anytime. Esp32 could be better choice i think because of network integration iot.
Sonar sensor is not reliable because of moisture ...... For some days it works properly but after 2-3 months it got damaged...and flactuates the data.....
Excellent project , I need a help , even I have done water level indicator using ultrasonic sensor but when the water reaches high the buzzer will one but it won't stop until the water level comes down from high level , but I need the buzzer should on only for 10 seconds then it should off plz help me by uploading the codes .
Sir iss project ko haumari ghar me jo submersivel pump or roof ke upor jo tank hay usme use kar sakte hay,? Agar kar sakte hay to ki tarah iske upor ek video banaiye na..isse samajh ne mey asani hogi..
This is cool. I'd like to modify your setup to automatically send water off my roof from a sump to 4 zones, depending on which area has a low water level. I'd be using solenoid valves and distance sensors. Can u offer guidance?
Hi. I really interested with your project, I've using two grl8-01 water control to control water pump. My question: is it possible to use 2 level control (three wire) sensor instead of two wire in this project?
I am soon coming with another video to show how to use wire sensor on the same circuit instead of sonar sensor, please stay tuned and tanks for writing in...
I have contacted through mail but no response. Can please tell me how to replace sonor sensor with float sensors. Using RF transmitter and receiver to make the system wireless,. please rply
Thank you very much for such a wonderful project. I am interested to build this project for my house. Can you please share the Gerber file or at least the schematic diagram.
@@TexoBot i already sent an email thru this email. your website cant be found thru safari and google, i need the gerber file and also the coding, hope you notice my comment😢
I want implant this project on my house water tank and pump system. Will it work in large scale? I mean, i have to use long wires upto 15m or more. So will it's accurate ? By using long wires
I am planning on doing this as well. I am afraid that wires will be like 80m long from pumping station to electronic measurement station (tanks)... Any comments?
Hi,I have liked the project, is it possible to sell to me already programmed Arduino nano board and the circuit diagram.If possible what is the cost including shipping to Uganda.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
For Gerber file requests please drop a mail to texobotenquiry@gmail.com
You explained the project in very detailed manner and the presentation of the project is just awesome.
Great. Pls make a same project on corporation line of water with dry protction and when water come in pipe line motor automatic start.
you can use the same circuit for this purpose if you are using a sump tank and a roof top tank..
Man, what I would pay to have a decent, ready made system like this that would output the tank level and water usage over time - to a mobile app... I've been looking everywhere online to buy.
Tankbolt is the solution, I have been using it. It uses ultrasonic sensor. Totally worth it.
i know I am pretty off topic but do anybody know of a good site to stream new series online?
@Brentley Sullivan I dunno try Flixportal. you can find it thru google:) -lane
@Lane Chandler thank you, I signed up and it seems like they got a lot of movies there :) Appreciate it !
@Brentley Sullivan Happy to help :)
Good...but adding a wireless connection is good in practical case...i know that u worked hard for it...good job man...keep it up
CAN YOU TELL US HOW ?
I want to install soner sensor on top.
My top ground to third floor so can I use long jumper wires ground to third floor so sensor work properly by too longest wires mean ground to third floor till?
The led's location is not mentioned in the PCB maker and it is present in the finally printed PCB , Can you tell us what do we have to connect it with
Nice project and a very clear, detailed and professional presentation! I learned exactly what I needed to possibly attempt this build. (What I want to do is add an Automatic Aquaponic Greenhouse Fish Tank Water Level Controller to a customized Open Energy Monitor platform.) This video is pointing me in the right direction. Thank you!
can you send me the gerber file
@@abhinashagasti3872 As it says in the SHOW MORE section, "For Gerber File Contact me over robothenewspeciesonearth@gmail.com".
@@alanmcrae8594 did you complete this project?
bro, add a thermistor to make the ultrasonic sensor more accurate. currently, the sensor doesn't take into the effect of temperature and humidity into account. Also, please send me the gerber file. Thanks in advance
Could I use a normally closed solenoid valve instead of the pump?
Yes you can
@@shaozab1992 how?
Brother you showed us different connection (probably wrong one) because what you shown in the video I tried that but there are some missing connection. And there is a huge difference between your PCB design and mine but I tried same as yours not woth it. So, kindly will you provide schematic diagram.
Ultra professional.. keep it up
thank you, mate! glad you like it.
How will use1 /4, 1/2, 3/4 button. What need to use push SW or? Push to on switch? And when need to press?
Hi I try to compile your code on the computer and get Error " Redfinition of 'void setup()" what Am I doing wrong?
And please suggest that what mm of wire i should use for using long wires (upto15m or more).🙏
Can u make the connection with circuit without ardinuo. Use only microcontroller..
Which unclede dry run protection, under and high voltage protection
Hi I will build this project soon for my son salt water aquarium. I want the system to trigger the filling when water level is 90% and not 20 % , where in the program I need to change the value from 20% to 90%?
Thank you
Dov
If you don't mind
Dear can you give me suggestion for dry run i mean is present is sump tank empty with dry run means same one more sensor to keep the pump flow end we will keep a sensor after 2 to 3 minutes if no water flow means it should act and shutdown pump
Can this project possible in the larger tank like using in the apartment water tank?
I have just one doubt. The distance between Arduino Uno and Sonar Sensor - how long can the wire be before performance suffers?
can we add ultrasonic sensor to the sump also?
Isme tank me pani khatam ho jayega to? Pump jal jayega.. You should combine irrigation system with automatic water level control in same project..
Awasom video , but it's helpful when you available this pcb on Amazon on your aacount too
I will make it available soon, thanks for your comment.
9851034095
From nepal
Can i use this with water tank on the roof top of the apartment? Water tank is made of stainless type. I want to have a system that sends message to my phone when water in the tank reach unsatisfying level.
Sir if any emergency we need to on the motor isn't possible even the water is on 50% at the Tank. So kindly add manual switch code for operating manualy.
Hi, right now, Im not ordering PCB, but I want to do it on DIY brown Soldering PCB. So for that, Can I get an Actual clear circuit diagram?
How do i implement in a house that has 3 floors? I need lot of wires
You can use wireless modules for communication between Arduinos
After sensing tap water , water pupm should start at 5 /10 minutes delay on after sensing water from tap. Is it possible to program as I said.
Hey bro .. do you have any circuit for the wireless?
Hello Akhil, I ordered the PCBs soldered everything as said and configured the nano. But the display is giving square boxes. Did I make any mistake. Please lemme know. Thanks in advance.
Please use the potentiometer to adjust the contrast
... It will work..
@@TexoBot I adjusted it to the max. I'm just getting the boxes. Is is something with the code. I still need to solder relay and peizzo buzzer.
Can you pls send the Gerber file to me bro
Did you manage to resolve the issue having similar problem
@@MrAllTimeGaming did you have the coding ,circuit diagram and gerber file? i tried to open the link but seem like the website cant be found😢
Great its working. im using it on a fish tank. i want the tankhight to be 20 cm and the top of the tank to be 15 cm, so i want the pump to switch off when the water line is 15 cm from the ultrasonic sensor. how can i set this
Please what did you use as your Power supply?
@@abdullahmohammedzainudeen1928 a USB phone charger
sir plz can you send me the codes and the circuit diagram
abhinash.agasti98@gmail.com
hello sir can you send me the gerber file please i need it urgently
@@abhinashagasti3872 did you get circut diagram and code please send me too , my email id is Amolsalunke001@gmail.com
what if the ultrasonic sensor is replaced by a water level sensor... please share master
Where is the circuit diagram. I cant find in the link that given in the discription also.please provide a clear and good circuit diagram please... I want to do this project..please help me😥.hope you will reply
Very nice explanation....helpful tutorial....Thank you for creating such an informative tutorial.
Great explanation good job man
How to add a push button to control the pump manually?
Very good and Weldon, you are very supportive and well explained ,,,thank you
A very Awesome and innovative technic.
Can you please share the arduino program to make the same with me?
would it possible to use two ultrasonic sensors instead of one. I mean one on tank and one on sump, this way it is possible to protect dry run and also additionally know the sump water level at anytime. Esp32 could be better choice i think because of network integration iot.
Excellent Presentation!
hey bro, can i replace the lcd display with single digit seven segment display?
Sorry Mr I need the circuit diagram of that project
Sonar sensor is not reliable because of moisture ...... For some days it works properly but after 2-3 months it got damaged...and flactuates the data.....
thats what i was thinking
@@Tech4geeks21st so what's the solution?
@@ratikantamahapatra8847 i have seen one video in that video he shown some sort of water level indicator sensor maybe it will be used for long time
Thank you for sharing your awesome project
Nice Project, can we use waterproof ultrasonic in this project.
Excellent project , I need a help , even I have done water level indicator using ultrasonic sensor but when the water reaches high the buzzer will one but it won't stop until the water level comes down from high level , but I need the buzzer should on only for 10 seconds then it should off plz help me by uploading the codes .
I need some help from you related this project
Will you share the program code to me
I searching a project with prasure sensor. Somone help me?
Hi can we customise the board???
good morning
very nice if submersible pump is 5- or 10 hp which relay i used pleease reply any change in remaining circuit pls reply
Good job buddy... Can the same pcb used to operate regular 220v house pumps?
Any pump with a capacity of 1HP or less can be controlled using this. Thank you.
@@TexoBot please provide gerber file to my email..
likhithsairam@gmail.com
Dear the is too good, I am interested to building the project, can you arrange CIRCUIT DIAGRAM,
Thanks
how long wire can be used from sonar sensor to arduino board.
Sir can you tell what rating pump have you personally used in this project
sir please clear me the diagram not able to understand the simmersable tank part thankyou
Can sonar sensor transmit signal over 60 to 70 meter?
Hey! Great work. Could You please provide as well the schematic circuit of this awesome project ?
( Eagle or something like this if possible please )
Please visit the Link
www.robotsthenextspeciesonearth.com/p/hi-all-welcome-to-yet-another-video.html
@@TexoBot dear sir plz sent me the diagram zip file plz my email id is : razibhassan32@gmail.com
How do you convert this to support a 1.5HP pump?
Can we use push button for manual motor start
Some issues in program i see in working sensor pump any time why
what kind of leveling sensor you are using and how?
Such a nice vedio...yet so little veiws...
Hello, is the sonar sensor still work in dark closed tank?
Yes. It will work
Looking for the sonar sensor replacement video
Sir iss project ko haumari ghar me jo submersivel pump or roof ke upor jo tank hay usme use kar sakte hay,?
Agar kar sakte hay to ki tarah iske upor ek video banaiye na..isse samajh ne mey asani hogi..
This is cool. I'd like to modify your setup to automatically send water off my roof from a sump to 4 zones, depending on which area has a low water level. I'd be using solenoid valves and distance sensors. Can u offer guidance?
Hi Jerrerson,
Thanks for your comment, I am happy to help you with that.
Please contact me over my email ID:-
robothenewspeciesonearth@gmail.com
Thank u....tried emailing you, but the email id is invalid
Bro for 30hp motor this automation work will be fine or what
Can I ask what water pump you used?
Really great project 🙂
Hi. I really interested with your project, I've using two grl8-01 water control to control water pump. My question: is it possible to use 2 level control (three wire) sensor instead of two wire in this project?
I am soon coming with another video to show how to use wire sensor on the same circuit instead of sonar sensor, please stay tuned and tanks for writing in...
Can you share a code, please? the page no found...
Will the ultrasonic sensor work when water evaporates from the tank and deposit on receiver and transmitter of ultrasonic sensor??
You are right . It will damage the sensor soon . So use a waterproof ultrasonic sensor, sr04t
Hey every component shown in the video is not there on fritzing... Please send the all component list and the circuit diagram...
Good interesting project and good demonstration.😀👍🏻
I have contacted through mail but no response.
Can please tell me how to replace sonor sensor with float sensors. Using RF transmitter and receiver to make the system wireless,. please rply
Very nice project. How to add Under, Overvoltage protection Code to this project Code.
Thank you very much for such a wonderful project. I am interested to build this project for my house. Can you please share the Gerber file or at least the schematic diagram.
For Gerber file requests please drop a mail to texobotenquiry@gmail.com
@@TexoBot Thank you for the reply Sir. I have already sent you a request at texobotenquiry@gmail.com. Please send the schematic diagram also Sir
@@TexoBot i already sent an email thru this email. your website cant be found thru safari and google, i need the gerber file and also the coding, hope you notice my comment😢
This code part can be done in android Mobile?
I want implant this project on my house water tank and pump system. Will it work in large scale?
I mean, i have to use long wires upto 15m or more.
So will it's accurate ? By using long wires
I am planning on doing this as well. I am afraid that wires will be like 80m long from pumping station to electronic measurement station (tanks)...
Any comments?
Maximum 10m
website is nor opening??
Thank you for the project idea i want code
Any side effects for ultrasonic sensor in water
Can I please have your Garber file that you have used in this project? I need it for my ordering.
Thanks.
Sir am doing the same project this year but using both Arduino and GSM technology,can u help me how to add GSM technology to your existing project
dear can u sent me diagram zip file and all component list plz
Hi,I have liked the project, is it possible to sell to me already programmed Arduino nano board and the circuit diagram.If possible what is the cost including shipping to Uganda.
But what if we want to turn on pump for other uses
Manually
Please, can I get the circuit schematic or the Gerber file? This is an excellent project and I would like to try it. Thanks in advance.
Please use the email address in the video description for communications. That would be a faster method rather than the comment section. Thx.
Sir, can you provide me the garber file of the PCB
Super project
Hi how can i order the PCB's i think i need the gerber files
Can we start motar when water tank is half
bro external relay means
It is a Supreme quality product.
Can you please let me know the cost of one such unit?
Dear i have done this ,Everything working Except the Dry Run protection not as well working
Can you clear it and send me details
Hey could you contact me I need more understanding on how you got the project working if you see this
I can't see the code for this project
Hi...i need this project as commercial use ...can u help me...
texobotenquiry@gmail.com
Hi brother ,
I need one set PCB with components , please let me know the price and courier. Thank you.
Hello sir, can I use it for 7 feet water tank...is it supportable, please tell me
This project works up till 4.5 meters max.
Could I buy a few of these completed from you?
Bro...I really need the code u used in this project....this is my minor project as well and I'm getting nowhere as iam now....please help me bro
And my project review is on Saturday... please bro
How can i get source code for the project
good exellent dear