First, congratulations on hitting and passing 100k followers. Second, Happy New Year. I love watching you and all the builds, along with all the videos. Looking forward to a killer 2025. Take care and be safe.
Been watching your channel for several years now...keep it up! 2025...I'm getting my car on the road and track! And I'm getting back down to my "fighting weight", as I like to say!
Little tip for you if you run into that again with a water leak. If the car run turn the blower on high speed with fresh air and then go around with dish soap and water mix and start spraying around all the trouble areas. It bubble up just like a tire. You could if the car doesn’t run, out an air hose in the car blowing air into the cabin, you just need to pressurize the cabin to find the leak. I’ve used both ways. I had a pinch weld leaking on a roof of a new escape that was eating my lunch at work and I ended up using both ways, the blower at first, then a blow gun once I got some trim off and head liner down to pin point exactly where. Just alittle trick you can keep up your sleeve next time.
Caleb you’re videos are awesome and the channel content is so inspiring to us on this side of the camara than you know. Have a safe and happy new year! Keep up the great work, I’ll see you in September!
I love the ford content I do not want to hear about the people that do not watch your channel I click in to see your ford content hear your information tips and tricks you don’t have one project that I would not want myself I’m just one hit on your channel not my rules but I watch everything you put out frack everyone else I tune in to your videos yeah I’m pissed frack everybody else I do not want to hear about people that don’t tune in because they don’t like the project you are showing
Looking good. You are right on the time it takes to build a car. I spent about an hour jacking with the broke battery tray hold down on the 91 project - a 5 minute fix 🤣
Had rear glass leak aswell in my old 89 GT because a guy had a sub in the back before I bought it had glass pulled and resealed was able to reuse original glass
Hey dude, I had a 1990 GT they had been in the front end collision and it always leaked in the driver side and so for the longest time I couldn’t figure it out and it’s a messed up the connection that goes back to the fuel pump that’s underneath the driver seat. Well I never really figured out and then I didn’t have to drive it every day so I put it up on jackstands and what I found when they stretched it on the frame and seen it tore holes and there’s a firewall, and just below the top of the firewall on the bottom of the firewall where they say. I had a bunch of holes rips in it when I hold it on the frame machine so I gotta make welder and some metal fill in the holes and it stopped all my leaks but when they stretched it back in shape on the frame machine what it did is a ripped up for 2 inch holes
Ive not drove my coupe in over 10 years . I still got some work to do but my back glass is loose . I removed the trim to repaint the car and i found that i can take my fingernails n pull the corner of the glass up a goos 1/2-1 in … so now before i hit the track gotta deal with that too !!
I got lucky I guess, when I bought my 93 notch in 2006 it was dry over time the back glass started leaking. At first it was only when you took it to the car wash it would run down the back glass but as time went on it got worse. Had a local glass company remove the rear glass a few years ago and check the channel and reinstall the glass now its fine and hasnt leaked for 3 years. Had similar issue with my 97 f150 only it was the windshield that started leaking, Driver side first, never showed on floor etc but the was leaking on the fuse block and gem module causing the dash lights to go stupid and various other things. Had the glass replaced and the leak was good for about 5 years then the butyl let loose on the passenger side and it leaked and would drip from the passenger side hand pull. Glass company literally knocked it out (smashed it ) so they had to replace and reinstalled again now it it dry again.
Good catch on the coupe with the leaking window Brother! Love that fuel cell in the other Fox! Building Foxbody Mustangs ain't for the faint of heart!
First, congratulations on hitting and passing 100k followers. Second, Happy New Year. I love watching you and all the builds, along with all the videos. Looking forward to a killer 2025. Take care and be safe.
Been watching your channel for several years now...keep it up! 2025...I'm getting my car on the road and track! And I'm getting back down to my "fighting weight", as I like to say!
It's a whole lot of work but you do things right not half doing things all your projects are top notch keep the video's coming
Happy New year!! I love your channel! Thank you!
Little tip for you if you run into that again with a water leak. If the car run turn the blower on high speed with fresh air and then go around with dish soap and water mix and start spraying around all the trouble areas. It bubble up just like a tire. You could if the car doesn’t run, out an air hose in the car blowing air into the cabin, you just need to pressurize the cabin to find the leak. I’ve used both ways. I had a pinch weld leaking on a roof of a new escape that was eating my lunch at work and I ended up using both ways, the blower at first, then a blow gun once I got some trim off and head liner down to pin point exactly where. Just alittle trick you can keep up your sleeve next time.
Caleb you’re videos are awesome and the channel content is so inspiring to us on this side of the camara than you know. Have a safe and happy new year! Keep up the great work, I’ll see you in September!
I love the ford content I do not want to hear about the people that do not watch your channel I click in to see your ford content hear your information tips and tricks you don’t have one project that I would not want myself I’m just one hit on your channel not my rules but I watch everything you put out frack everyone else I tune in to your videos yeah I’m pissed frack everybody else I do not want to hear about people that don’t tune in because they don’t like the project you are showing
Looking good. You are right on the time it takes to build a car. I spent about an hour jacking with the broke battery tray hold down on the 91 project - a 5 minute fix 🤣
Had rear glass leak aswell in my old 89 GT because a guy had a sub in the back before I bought it had glass pulled and resealed was able to reuse original glass
Very cool tank, yeah sometimes no matter if it's new stuff, if there is a way for water to get in it seems
to find it, great catch to fix it.
I think the tapping noise is just background music in the video
Hey dude, I had a 1990 GT they had been in the front end collision and it always leaked in the driver side and so for the longest time I couldn’t figure it out and it’s a messed up the connection that goes back to the fuel pump that’s underneath the driver seat. Well I never really figured out and then I didn’t have to drive it every day so I put it up on jackstands and what I found when they stretched it on the frame and seen it tore holes and there’s a firewall, and just below the top of the firewall on the bottom of the firewall where they say. I had a bunch of holes rips in it when I hold it on the frame machine so I gotta make welder and some metal fill in the holes and it stopped all my leaks but when they stretched it back in shape on the frame machine what it did is a ripped up for 2 inch holes
Looking closer and closer to these projects getting done, really looking forward for the 3.0 road warrior
Ive not drove my coupe in over 10 years . I still got some work to do but my back glass is loose . I removed the trim to repaint the car and i found that i can take my fingernails n pull the corner of the glass up a goos 1/2-1 in … so now before i hit the track gotta deal with that too !!
Of course, I am a notch fan....but I really love "frost-bite" !!
I got lucky I guess, when I bought my 93 notch in 2006 it was dry over time the back glass started leaking. At first it was only when you took it to the car wash it would run down the back glass but as time went on it got worse. Had a local glass company remove the rear glass a few years ago and check the channel and reinstall the glass now its fine and hasnt leaked for 3 years. Had similar issue with my 97 f150 only it was the windshield that started leaking, Driver side first, never showed on floor etc but the was leaking on the fuse block and gem module causing the dash lights to go stupid and various other things. Had the glass replaced and the leak was good for about 5 years then the butyl let loose on the passenger side and it leaked and would drip from the passenger side hand pull. Glass company literally knocked it out (smashed it ) so they had to replace and reinstalled again now it it dry again.
Almost there bud💪🏼🇺🇸👌
How long has George’s car been there? I remember seeing it when the shop was built.
I didn't hear any noise my brother's and sister's. I like watching the end of the year video
I watch .Happy New year man
how did you get the egr spacer off the intake without breaking any thing i am having that issue and do i need that spacer
Good afternoon who did your a/c lines from the fire wall out
That tank is cool, has anyone ever done a rally style soft-tank?
If you bypass the EGR, do you still have to run the coolant thru it
I didn't. Used JB Weld paste, filled the holes. I had bought new throttle body and egr spacer.
@ yeah I’ve got mine plugged off, was just wandering if maybe it was needed for some reason
Happy new year man! I think 2025 is going to be a good year for all Americans 💪
What are you getting a blower from outer space
There’s some kind of tapping or ticking noise in the audio. It is extremely distracting.
This may sound crazy, but that tapping noise is giving me anxiety. I cannot watch the video.
Anxiety is only fear of future harm.