+Sullivan Waterworks Thanks! BTW, speaking of water and wood... the wood I used to make this fitting for my lawn mower is 1/2" plywood painted with Titebond 3 Waterproof Wood Glue. I use Titebond 3 as a primer for all my outdoor wood projects. It creates a very hard, tough, waterproof surface that takes paint well and makes the wood completely protected from the elements. I buy it by the gallon at Lowe's and usually use a 4-inch roller to apply it. I attached the ABS pipe using Bondo All Purpose Putty, another very useful product that doesn't run like the Bondo used on car bodies. goo.gl/E4f0B3 goo.gl/2uBR3O
Absolutely classic!! :) I just thought this was wonderfully ingenious. What does the mulch do to benefit the rye crop, apart from adding nitrogen etc? Does it have some other benefit?
You are so creative and inspiring.
That birdsong is divine.
that makes great sileage to feed to cattle to
Could you use this as a leaf mulcher using a larger opening?
Excellent! That's great!
+Sullivan Waterworks
Thanks! BTW, speaking of water and wood... the wood I used to make this fitting for my lawn mower is 1/2" plywood painted with Titebond 3 Waterproof Wood Glue. I use Titebond 3 as a primer for all my outdoor wood projects. It creates a very hard, tough, waterproof surface that takes paint well and makes the wood completely protected from the elements. I buy it by the gallon at Lowe's and usually use a 4-inch roller to apply it. I attached the ABS pipe using Bondo All Purpose Putty, another very useful product that doesn't run like the Bondo used on car bodies.
goo.gl/E4f0B3
goo.gl/2uBR3O
have you tried running large bark nuggets through this to see if they will be chopped into smaller nuggets?
Absolutely classic!! :) I just thought this was wonderfully ingenious.
What does the mulch do to benefit the rye crop, apart from adding nitrogen etc? Does it have some other benefit?
Smart
hi, how did you make the manifold?
Genius
+firecloud77 how many amps is the lawn mower?
Brilliant but please, no one try this on a gas powered mower.
slhines7 Why wouldn’t this be any safer using a gas powered mower? I’m new to this so I’m honestly curious.
Why? gas is more powerful isn't it?
@@donactfussy9890 Because all of the oil will leak/pour out and then the motor will be ruined.
Probably get away with it with a 2stroke. Otherwise cut a hole in the deck for the feed
master mind
Engine upside down??? Amazing... How long did it survive?
its electric idiot
I think that the engine will be out of order quickly because the engine works without enough engine oil.
It's an electric motor.
@@jasonhuhare 😂
nice video good job stay with me together succes full thank You
Macht irgendwie keinen Sinn, wenn sogar die Kolben mit gehäckselt werden. Und dann alles nur als Mulch? Die Strümpfe treiben eh nicht nochmal aus...
Stop sticking your fingers in that! 😬