Film Scanning with a Digital Camera - How good is it?

Поділитися
Вставка
  • Опубліковано 2 лип 2024
  • In this video, I’m testing out a digital camera setup for scanning film, and comparing it to some images from the Nikon Coolscan 9000 as well as the Epson V4990. This is something that I’ve wanted to do for a while now, and recently the company Valoi reached out and offered to get me set up with one of their kits and a lens. Without spoiling it, I’ll say that I was impressed, even just using the X-T4 and a cheaper lens.
    Make sure to check out Valoi if you’re interested in setting something like this set up: www.valoi.co/products
    -------------------------------
    ►Follow me on Instagram: / kyle__mcdougall
    ►Order my new book ‘An American Mile’: bit.ly/3Og6Z45
    ►*DISCLAIMER*
    Some of the links below are affiliate links, where I earn a small commission if you click on the link and purchase an item. The money I earn helps me make this type of content consistently.
    My '35mm Film Photography Course' on Skillshare (FREE with this link): skl.sh/2JrGhFs
    My 'Medium Format Film Photography Course' on Skillshare (FREE with this link): skl.sh/3r7KLta
    Where I source music for my videos (One FREE month with this link): fm.pxf.io/c/1953156/1347628/1...
    Videos on this channel are filmed using the Fuji X-H2s: bhpho.to/3UEjFVs
    ►FILM PHOTOGRAPHY GEAR (*these are affiliate links):
    My go-to medium format camera: ebay.us/GaK9Kp
    My favourite 35mm film camera: ebay.us/82WyVI
    My favourite 35mm film lens: ebay.us/u0V817
    My favourite medium format travel camera: ebay.us/FVcfWk
    My go-to light meter: ebay.us/QIFXF0
    My favourite film stock: ebay.us/orbudp
    My favourite 645 medium format film camera: ebay.us/ydY4HK
    →Instagram: bit.ly/2GuYV21
    →Website: kmcdougall.com

КОМЕНТАРІ • 372

  • @oldtownpaul
    @oldtownpaul 2 роки тому +89

    If you line your lens/camera up perfectly you will get even better results. Use a mirror on top of your negative holder, and then line the centre focus point up with the centre of the lens. I too use the 7Artisans, and this line up trick gives cracking results! Also, focus at f2.8 on the grain, then take the shots at f8. Great video, as always.

    • @noahmacomber5970
      @noahmacomber5970 Рік тому +1

      I am looking at getting into scanning like this and this would help a ton... Thank you for the advise!

    • @franzjosefstakes
      @franzjosefstakes Рік тому +13

      I'd be careful with shooting at f8, due to diffraction kicking in earlier at closer distances, f5.6 might actually be sharper.

    • @ochatimothy2336
      @ochatimothy2336 8 місяців тому

      sorry new here, why do we need to open up at f2.8 to focus?

    • @oldtownpaul
      @oldtownpaul 8 місяців тому +4

      @@ochatimothy2336 You have the shallowest DoF at the widest aperture, so nail focus here and then when you stop down the DoF increases and will keep you in sharp focus even if there are minor undulations as you scan trough the roll of film. It’s just the way I do it, and I think the EFH guy advised me to do it this way. Cheers.

    • @ochatimothy2336
      @ochatimothy2336 8 місяців тому +3

      @@oldtownpaul that makes sense, thanks a lot. I always try to focus at f8 but somehow always get slightly out of focus results. it made me gave up dslr scanning entirely because i was too frustrated. will try again with your technique! thanks again, cheers!

  • @valoico
    @valoico 2 роки тому +36

    Thanks for checking out our equipment and camera scanning generally! Great to see you try out camera scanning and finding it an interesting proposition for your workflow! We're really looking forward to seeing what you do with it.

    • @TrailerHomeVideo
      @TrailerHomeVideo 2 роки тому

      tempting stuff. Are you planning on going into 4x5 inch Large Format?

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +1

      Happy we were able to make this. Definitely learned a lot and excited to go down this route in the future!

  • @VintageInsightPhotography
    @VintageInsightPhotography 2 роки тому +5

    Great comparison. I made a film holder out of plywood - basically a box with a 35mm carrier on one side and a 6cm carrier on another. Works pretty well.

  • @MichaWha
    @MichaWha 2 роки тому +2

    I've been DSLR-scanning all my analog photos and I've been consistently happy with the results.
    I keep improving my setup (went from a Canon 6D to a Sony a7r2, amazing improvement) and I'm super happy with my scans!

  • @dougmacmillan1712
    @dougmacmillan1712 Місяць тому +2

    I have a camera scanner setup based on, ironically, a Leitz Valoy enlarger stand. The Valoi accessories look great!

  • @ketchuppy
    @ketchuppy 2 роки тому +1

    the timing of this was so perfect! was looking at this exact debate just this morning to replace my epson flatbed - thanks for the comparison

  • @michabutkiewicz702
    @michabutkiewicz702 2 роки тому

    as always great, consistent comparison, thanks man!

  • @mrca2004
    @mrca2004 2 роки тому +6

    My 46 mp d850 and stellar zeiss 100 mm makro planar are a phenomenal combination. I use them tethered to light room. I had most of the other pieces needed, a rolling camera stand, a powerful led photo light. The valoi is taped to a piece of mat board taped to a sheet of translucent plexi over the light in my desk top side drawer. I'm getting huge sharp files. Not paying $20+ for mailing, developing and scanning per roll.

  • @kencrisp6333
    @kencrisp6333 Рік тому

    Kyle...I much appreciate the time you spent making this comparison video. I too have a Nikon Coolscan 9000 ED film scanner that I used maybe two times since I bought it years ago when Nikon announced they were discontinuing film scanners. The high-resolution scans just took so long for me. I recently chose to dive into the digital camera film scanning (known as re-photography) and decided to go with the Negative Supply Pro Film Carrier 35 with their Light Source Mini. I made the camera stand base by sandwiching two 3/4" MDF boards together and rounding-off the corners and attaching rubber feet underneath, giving me a solid 1-1/2" "weighty" and inexpensive base. For the riser, I bought an inexpensive 2-foot section of galvanized "black pipe" from Home Depot and firmly attached it to the MDF base. It is rock-solid and can be taken apart in 15 seconds. I'll mount my Sony A7 IV 33MP mirrorless camera with the Sigma 105mm F2.8 DG DN Macro lens to the black pipe with the Manfrotto 035RL Super Clamp. I own Negative Lab Pro, but I'll also consider Silverfast HDR 9, which offers the SRDx Plug-in for Photoshop. This plugin removes dust and scratches for camera film scans, even without the infrared channel provided by traditional scanners. Silverfast also converts the negative to a positive via its NegaFix feature, which also has presets for various film types. I'll provide my feedback after I find time to test this setup.

  • @Matt-nl5gj
    @Matt-nl5gj 2 роки тому +2

    i'm actually surprised you haven't already made a video about this, excited to watch it right now

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      As mentioned, never really wanted to invest in a setup just for a vid because of the Coolscan. But glad I was finally able to make this!

  • @pleewis
    @pleewis 2 роки тому +5

    I work at a city archive as a photographer. And we have since a couple of years switched to DSLR scanning. For me it's the future of digitalising film. If the camera is out of date we replace it with its newer model and can continue without having to change my workflow. I have the luxury of using the best sensors but with camera like the xt-4 that I use personally as well you can quickly get solid results. With stitching you can go as far as you want. I certainly do that at my job if I need a certain size or if it's a endangered object (glass, colour negatives and positives).
    Of course I rather still use a flextight scanner. But since Hasselblad has been taken over by DJI I doubt support for these scanners are going to exist for long.
    I might make a channel one day about my film photography and my job at the archive.

  • @downtofun
    @downtofun 2 роки тому

    This was super helpful for me. Thanks very much!

  • @barbsfpv3066
    @barbsfpv3066 2 роки тому +1

    I'm getting back into black and white film photography, and home developing, but still wanted to digitize the photos for post production. I settled on camera scanning as well.
    I bought an old Nikon bellows and a slide/negative copier on ebay for less than $100. I already had a Micro-Nikkor 55mm f3.5 to do the lens work, but those can be had for about $40-50 too.
    I'm still putting all my equipment together, so this video couldn't have come at a better time.
    I'm glad the results will be acceptable.
    I'll be shooting full-frame on my Sony A7II with a Nikon adapter.
    Thanks for the great video.

  • @messsucher
    @messsucher 2 роки тому +62

    Personally after developing myself and scanning myself for some time, I was pretty shocked of how much the quality compares to flatbed scanners that I had. But I feel like a lot of youtubers that made video on this didn't mention how tricky it is like you mentioned in the process. Trying to control the stray lights from the lightpad, getting the film flat, or making the film align with the camera sensor... This all could be easier if I pruchased dedicated holders & copystands, but frankly they're not worth that much.. Coming from China, I legit saw the same holder being sold for $50 back home, while in the US, the same product rebranded goes for $300.
    And with these money spent on developing, scanning equipments, and the time spent ensuring they're dust-free, flat. Really does compare to the lab prices. Whether if my effort/quality is worth all that
    I've used to go to labs, gives them 15 rolls. And receives scans that same day, or within 2~3 days with amazing results. But man, the price of develop+scanning are super high. When you're doing these urself, theres a lot more rolls you need to go through before you can make "profit". Plus there's a huge curve before the results are as good as labs in my opinion

    • @frankwu1713
      @frankwu1713 2 роки тому +3

      Hey, could you tell me what is the name of the brand of the holder that you see on the Chinese website? Like Taobao and such, I am trying to find one here in China

    • @ma-bn8jh
      @ma-bn8jh 2 роки тому +1

      Me too! I'm in China. I have been looking at the 那些胶卷. It doesn't look as good as the Valoi though, especially when it comes to accessories.

    • @mpk33
      @mpk33 2 роки тому +5

      Get an Essential Film Holder. Way better than the brand featured here, and heaps cheaper.

    • @messsucher
      @messsucher 2 роки тому

      @@mpk33 basically what I mean. almost every holders out there are overpriced

    • @mpk33
      @mpk33 2 роки тому

      @@messsucher I think the EFH is still fair. And a return policy on defects. Can't say that for the Chinese stuff. Not worth the risk.

  • @jonjanson8021
    @jonjanson8021 2 роки тому +2

    I use an old school slide copier, used with a digital camera. The brand name was "OHNAR Slide Copier". Very cheap on E bay. You load the film into the holder in strips, and the copier is attached to the camera lens mount so no need for a support or seperate film holder with no alignment issues. I use flash fired directly into the slide copier diffuser. I adjust exposure by adjusting the flash power.

  • @brntgudn
    @brntgudn 2 роки тому +2

    I've been enjoying camera scanning for the past year. It's fast, modular and offers high quality images. I'm currently using a Canon 6D mkii with essential film holder, I also have a dedicated copy stand for DSLRs and high CRI LED light. Stitching a 6x7 image with 6 overlapping shots gives me massive files with amazing quality. It's tedious but I usually save the stitching process for special images or for printing. My recommendation to those getting into camera scanning is don't cheap out on your build. I bought a modern macro lens (used) and sold an older macro lens because the quality was so bad. Buying a dedicated copy stand was sturdier than my previous build. I also bought some accessories as well (tether cable, batter adapter for wall plugs, etc). It's still significantly cheaper than a Nikon Coolscan 9000 but may be more expensive than a flatbed. It all depends on what you have available to you.

  • @tomfwatson
    @tomfwatson 2 роки тому +1

    Just what I needed. Nice to see a similar less expensive option vs the negative supply product.

    • @fuglong
      @fuglong 2 роки тому

      I was a little less excited when I found the digital camera he's using is $1500

  • @dannydivilly6146
    @dannydivilly6146 2 роки тому +6

    Great video, man. I actually just switched last month to the same setup. Xt3 and 7artisans. Digging the results. If you are looking for a copy stand but don’t want to spend 300 bucks, or whatever. I bought a large wooden cutting board, a 18inx1in steel pipe, a 1in pipe floor flange, then a Small Rig clamp with 1/8in adapter. Just put it all together and added a screw-on tripod head, and the whole thing cost me like 50 bucks. If anyone has questions or if I didn’t explain that correctly, feel free to ask away. Thanks! Keep up the hardwork, dude.

  • @SadieMay08
    @SadieMay08 2 роки тому +1

    Been curious to try this with my Fuji GFX and an extension tube… thanks for the video!

  • @eggr17ify
    @eggr17ify 2 роки тому

    Been using my A7r3 and a 105 lowa macro lens with a basic holder and I've been really happy 👍

  • @andersblomster
    @andersblomster 2 роки тому +3

    I had the Coolscan 8000 complete with glass holders, but the speed (or lack of) drove me nuts. Also had an Epson flatbed in the past which was fine with larger formats, but also slow. Now doing camera scanning and, while not perfect it really is the best option for me, hands down. Great video as always!

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      It seems every option really does have pros and cons. The Coolscan I love because it is simple, and it gives you incredible results with no messing around. But yeah, the speed and flexibility of a system like this really is great.

  • @carbonejack
    @carbonejack 2 роки тому

    Thanks, Kyle. Your video was the first in-depth look at this process that I had. I have an Epson V600 and I'm not happy with the scans. After watching your video I spent a day doing research. I decided to get the Valoi system. I have 3-4 rolls of 120 sitting on my desk waiting to send off. The reason I haven't sent them off is because of the price of the scans. I figure anything over 28 rolls of film the system will pay for itself. And to your point, I don't even bother doing 35mm film on the Epson. I've got 6x6, 645, and 67 format cameras. So, there you are.

  • @fuglong
    @fuglong 2 роки тому +1

    Been looking for a comparison like this, thanks!

  • @pauldavidkemp
    @pauldavidkemp 2 роки тому +4

    Valoi equipment are great!
    I get amazing results with the Sigma Art 70mm macro lens a Sony A7ii and taking multiple photos of the negatives and stitching in lightroom, and it’s so much quicker than conventional scanning!

    • @thomasbasc9817
      @thomasbasc9817 2 роки тому

      What would be the purpose of taking multiple photos of the same picture? The quality isn’t great with just taking 1 frame? To scan?

  • @_buttertigers
    @_buttertigers 2 роки тому +1

    For a while I used a fuji setup to camera scan too, I found the sharpening really work well when you add just a bit on the texture slider as well, it really brings the grain out in a nice way. Especially when Fuji files are known to not sharpen very well using LR's engine and can cause "worms" when pixel peeping

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      Just bought this exact same combo. Excited to try it. :)

  • @ginovairo6487
    @ginovairo6487 2 роки тому +5

    Great video Kyle and interesting to see the comparisons to the scanners. I use an Olympus OMD EM1 mk2 with their 60mm macro. The HiRes pixel shift feature is brilliant for film “scans”. This gives me 80 MP images and another bonus is that the pixel shift provides for improved (100%) colour accuracy over regular digital images since it avoids the Bayer mosaic which interpolates adjacent photo sites to average the RGB information which provides 33% colour accuracy! I find this really improves the quality of the digital camera scans of my 6 x6 cm film captures.

    • @Nobody-Nowhere
      @Nobody-Nowhere 2 роки тому

      Pixel shift is excellent for reproing negs. At least you get the same image quality that a scanner trilinear RGB sensor can output, though it still loses in the optical path. As scanners only use a thin line in the center of the optics, thus they do not suffer from the degraded image quality at the corners.
      The other benefit of scanners is the controlled light path that only illuminates a small part of the neg at any given moment, optimally using a condenser lens.
      Pixel shifting is not so much about the color accuracy, but the lack of upscaling that happens without it. All normal bayer captures are upscaled, and you never get rid of the softness it causes and the washed out micro contrast.
      Scanners are purpose build machines. As long as you don't go for Epsons or any of the other crap.

  • @cedarandsound
    @cedarandsound 2 роки тому +2

    I find it to be sharper than flatbed scanner because of the fine tuning you can do with the macro lens. If you can manually focus to the grain perfectly and have everything level, then it's perfection in comparison with cheaper flatbed scanners.

  • @mpk33
    @mpk33 2 роки тому +5

    The lens you needed for this was the Tokina 100mm 2.8 Macro. Affordable (compared to the Nikon 105mm Macro) & stunning results. A total sleeper lens made in Japan. I'd use it for wedding portraits 10-15 years ago. Still have it & use it for my digital scanning. Mint!
    I knew you'd love the results of digital scanning. I've told you a few times over the last few years, Kyle. You could totally sell the Coolscan 9000 & get a killer digital setup & never look back & gain so much time to do more of what you want...lol 😉

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +1

      Cheers, Michael! I actually just got a GFX100s to use for a project this year, so it'll also become my scanner. The Coolscan is up for sale now (I'll miss it!)

    • @mpk33
      @mpk33 2 роки тому

      @@KyleMcDougall Awesome mate. Check out the Essential Film Holder system also. Way cheaper than the Valloi & won't leave roller marks or micro scratches on your negatives. EFH has dedicated masks for each medium format type also (645/6×6/6×7). It's better than the Valloi IMO. Happy free time mate!

  • @SinaFarhat
    @SinaFarhat 2 роки тому +6

    I used to scan 35mm and 120 with a Epson flatbed and didn't like the blurry files I got!
    When I built my first dslr scanning setup I finally made some quality scans of my frames and I haven't looked back!
    I would not want a slow nikon dedicated film scanner today as DSLR scanning is my go-to method!

  • @arcp_
    @arcp_ 2 роки тому +1

    I got the valoi holders for 35mm and medium format. they're great!

  • @housemusic325
    @housemusic325 2 роки тому +2

    I use an Olympus em1 mk2 with a super Takumar 55mm/f1.8 to scan my film.
    In 135 i scan at native resolution of 20 mpx and get great result.
    For 120 my camera have a super resolution mode which make a sensor shift to create 80mpx image.
    Sometimes i do also 80mpx scan of 135 but it is less common since 20mpx is enough.
    Both look impressive and for me, it's the best setup to scan since it can also be used to make digital photos.

  • @jsward96
    @jsward96 2 роки тому +53

    Once you start stitching 6+ overlapping frames together for 120, the results are quite stunning. it is more time consuming and finicky though.

    • @zguy95135
      @zguy95135 2 роки тому +13

      I’ve found the diminishing returns point for a 24mp camera scan to be four shots on 120. Even just doing a simple two stitch (left side of neg, right side of neg) is a HUGE bump over a single shot and barely takes any more time.

    • @theoswinscow
      @theoswinscow 2 роки тому

      @@zguy95135 yeh this is what I do generally. Though I do have problems with some images in the stitching process. Images with a lot of empty space sometimes don't stitch. So annoying

    • @zguy95135
      @zguy95135 2 роки тому

      @@theoswinscow oh yeah, skies can be a real pita

    • @davidlr97
      @davidlr97 2 роки тому

      I tried doing this with large format and I agree that you can get good results, but I found the process extremely painstaking and if there's not a lot of detail in the negatives, it's really hard to get a good stitch.

    • @MrAndronom
      @MrAndronom 2 роки тому +1

      A quicker method is taking 8-16 frames in continuous mode an stack them in post. It is important that there is minimal movement between each shot. The shake introduced by the mechanical shutter or the own hands is usually enough, if the camera is not fixed to sturdy. Before alining and stacking the scans they can be upscaled up to 4x their original resolution (2x per axis). This way you get noise-free super-resolution scans on any camera. Of corse it´s even faster and simpler if your camera supports sensor-shift super-resolution by default.

  • @louiereynoso
    @louiereynoso 2 роки тому +7

    Great timing. Got the last bit of Valoi kit in the mail I needed this week. Diving into scanning tonight! 20+ years of negatives to digitize and archive.

  • @DuongNguyenVN73
    @DuongNguyenVN73 2 роки тому +1

    After seeing the red neon color render by your camera scan, I'd like to keep my cool scan for some more decades!!!

  • @christopherbgriffith
    @christopherbgriffith 2 роки тому +6

    One additional consideration I really like (based on how I process film scans, YMMV) is that when "scanning" with my X-T3, I can apply any of their film simulations in post. When I shot some expired Kodak stuff and really wanted to crank the vintage, washed-out colors I used Classic Negative. When I wanted a lower contrast look right off the bat I could pick Eterna. It really gives a lot of rapid creative control for those who want to use it.
    Also, from the cost standpoint, older DSLRs that have a solid 20+ megapixels (probably plenty for people not looking to make massive prints or are just scanning 35mm) can be found all day for

  • @AdrianBacon
    @AdrianBacon 2 роки тому +5

    For me, I went the camera scanning route simply because it’s faster than anything else I’ve used. I standardized on Negative Supply film holders and went with the Sigma 70mm macro art lens (the new one) paired with the Canon R5 and a strobe for the light source. It’s fast, and gives excellent performance.

    • @laurencewhite4809
      @laurencewhite4809 8 місяців тому

      Do you still recommend the Sigma 70mm macro art after having used it for a long time? I want to build my own setup and have read a lot of positive comments regarding this lens.

    • @AdrianBacon
      @AdrianBacon 7 місяців тому

      @@laurencewhite4809 Absolutely. It's a great lens, and a great value.

  • @FlosBlog
    @FlosBlog 2 роки тому +5

    Just a small tip for anyone sending their negatives out to be scanned: ask the lab if you could send them strips from various roles so you can leave out the ones that are no keepers anyway.

  • @jasonwhitehead4068
    @jasonwhitehead4068 2 роки тому +1

    Very interesting episode. I stopped scanning because I disliked results and time it took with flat bed. I will definitely give this a go, thanks

  • @tonyhayes9827
    @tonyhayes9827 2 роки тому +2

    For 35mm only I use the Nikon ES-2 film digitizer. You screw it on to the front of the micro lens and attach it to the camera body. End of set up. The film plane and sensor plane are automatically aligned without you having to do anything and they stay that way even if you move the camera. I can swing the camera in a large circle while I take the image of the negative or slide, literally, and still get crystal sharp images because the whole unit moves as one. It's a pity they don't make an attachment for medium format as well. Other manufacturers should follow suit. Its a cheap set up and it cant fail.

  • @1331photo
    @1331photo 2 роки тому +1

    Great breakdown of scanning with an SLR! 😎🤘🏻🤘🏻

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +1

      Thank you.

    • @1331photo
      @1331photo 2 роки тому

      @@KyleMcDougall You’re welcome! 😎👍🏻

  • @Sodacake
    @Sodacake 2 роки тому +1

    I've been waiting for a video like this from you for a while. Thanks a lot! I know you must have so many videos or ideas for videos already in the pipeline, but one I would find interesting (if you have the time) is comparing film grain emulation (Film Convert, Dehancer, etc) for video. I really like your video work so I'm curious about your opinion regarding those.

  • @tonyjones1726
    @tonyjones1726 2 роки тому +1

    The Skier Pro System Sunray Box III also looks like a nice system. Just caught on to it this afternoon. Maybe you can do a review or give thoughts on that system also. Great review on the Valoi.

  • @PeterGallagher1
    @PeterGallagher1 2 роки тому +2

    Thanks for doing this. I only have an older Epson 4490 and I think its time to move on, especially after seeing the results you were getting. Cheers.

  • @FotosyMas.
    @FotosyMas. 2 роки тому +2

    In my opinion, the best film scanner you can buy nowadays is the Pacific Image Prime Film XAs super edition. It’s like a modern day Pakon, but the XA can scan at a true 5000dpi optical resolution. You can find it on sale often for $480 at B&H Photo.

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      For 35 it sounds like a great option. Unfortunately we're still lacking options for multi format.

  • @steveh1273
    @steveh1273 2 роки тому +1

    I use a D800E (36 mp) with Nikon 105mm micro Nikkor lens at 1:1 magnification and it gets all the grain. I record my 6x6 negs in two shots (35mm negs in one shot) and stitch in Lightroom. The results are better than I anticipated, so I digitally archived all my film images that I cared about, except 4x5 film; will use epson 750 scanner for that if I decide to scan them.

  • @mp3remix171
    @mp3remix171 2 роки тому +1

    I use Valoi for my 35mm love it and my epson v500 is ok for 120!

  • @zguy95135
    @zguy95135 2 роки тому +3

    I need to get the Valoi setup, I’ve been camera scanning since 2016 and never wanted to spend the money on a real negative holder system (they didn’t exist until the Negative Supply ones and those are $$$). Dealing with janky setups is such a pain in the ass and I just don’t have the patience for it anymore… If I could just slap the negative in there and not deal with reflections around the edges and film flatness anymore I would probably shoot a lot more film again.
    btw if you don’t have a camera, go micro 4/3! They are SO cheap and product great results, and you can get away with not needing a 1:1 macro which are less expensive. I honestly regret going from my GX85 to a Sony A7ii for scanning, full frame opened a massive can of worms lens wise for very little benefit.

  • @BenjaminKanarek
    @BenjaminKanarek 2 роки тому

    Thanks for your video greatly appreciate it! have both the Fujifilm film XT4 and the GFX 50S and I just ordered the mounts in 35 mm and 120 from Norway so I’m looking forward to using my 120 mm macro on my GFX or my 90 mm F2 lens with extension tubes. I just ordered a small light table and I’m going to try to set up the camera on the tripod with perhaps an extension pole. From a Torontonian living in Paris France

  • @michaelhaarstad2130
    @michaelhaarstad2130 2 роки тому +2

    I've been hoping for this video. Finally locked in a good home scanning setup but I've been curious to see a comparison with the coolscan. The nikon is still out of reach for me but glad to see I'm not missing out too much. Others have said it but the Loawa 65mm is quite a step up from the 7 artisans. That being said if you're considering going all the way up to a GFX setup I'd definitely watch that video too.

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +3

      GFX100 is here now. Video at some point in the future. :)

  • @djdublo
    @djdublo 2 роки тому

    As someone who has truckloads of negs that I'd love to scan, this video is invaluable, thanks! I have a Nikon DSLR so that covers the camera. I'm guessing that I could also use my tripod to hold it in position over a light source and neg holder. Seeing your results shows that for me a dedicated neg scanner might be an unnecessary investment.

  • @guilhermelucio
    @guilhermelucio 2 роки тому +1

    Thanks for sharing your experience. The only thing I'd say is that for better results you got to have a better lens. Also, with larger formats, you definitely should have stitched since you didn't really achieve the full potential of the camera scan and the negative. I have a Canon EOSR, 30 megapixels, with a Laowa 100mm 2x magnification, and I can definitely get larger files if I stitch, even larger than the Coolscan you showed to be honest, and yes, investing in a decent lens is not fun, but the whole setup is still cheaper than dedicated scanners.

  • @jonathan.8223
    @jonathan.8223 2 роки тому +3

    Great idea getting the GFX50R for scanning and shooting, you could even use it for 4x5 scanning and simply sell the Coolscan for as much as the body would cost. I bought the 50R in large part due to your review, I’d love to see some more content of you making good use of it! It seemed to suit your style of shooting well…

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +3

      GFX100s is on the way. 🙂

    • @abrrault
      @abrrault 2 роки тому

      @@KyleMcDougall you are going to have next level scans! Beyond resolution, tones transition and colours rendering will increase greatly

  • @abrrault
    @abrrault 2 роки тому

    Super nice video Kyle! A sturdy tripod and negative stitching on 120 films will improve massively your scans! Just splitting your negative in two is already an immense improvement and does not take that much more time. Also I found that (maybe it's in my head) over exposing a bit with longer exposure time (by reducing light source) give me finer tones and sharpness. Cheers mate

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +1

      Cheers, Arnaud. And yep, new copystand is the next purchase!

  • @stefan_becker
    @stefan_becker 2 роки тому +2

    The image quality when "scanning" 35mm negatives with the 60mp Sony A7rIV, the Sigma 105mm 2.8 DG DN macro and the Valoi Film Advancer is amazing. It's imho almost indistinguishable from my Epson V750 scans, but the "scanning" is way faster with the camera. I can scan an entire 35mm film in less than 5 minutes(!).

  • @25myma
    @25myma 2 роки тому +1

    I use an even cheaper setup; 16mp fuji XE1 and a $50, 50mm pergear lens + macro ring; still works great for old folders & TLRs and if I feel like there's more resolution left, as you said, just take 2 shots and stitch them.

  • @filmerdennis
    @filmerdennis 2 роки тому +2

    I honestly like the Camera scans a lot! Another plus is the RAW image from your camera (generally speaking not YOUR camera) will be way smaller file size than these crazy 500mb Tiffs I get from my v800. I might try this one day myself and compare.

    • @Nobody-Nowhere
      @Nobody-Nowhere 2 роки тому +2

      That's because scanners have trilinear RGB sensor, the file sizes are larger because they contain 3x the information. Your 20MP digital camera only outputs 1x20MP, its the upscaled from the raw file into 3x20MP. While a scanner outputs 3x20MP, and does not upscale at all. This is also why scanneras will always outperform digital cameras, not the only reason though.

  • @julien.2573
    @julien.2573 2 роки тому +2

    I wasn't happy with my epson, especially for 35mm so I build my own set up.
    I bought a monitor stand with a glass panel base so I can put the light panel + the film holder on it and it's easier to slide the whole light panel to take multiple shots. I bought a 50mm enlarger lens for durt cheap (20€) and with some extention tubes the results are very good. My digital camera has a full frame sensor so I can scan negatives with a 1:1 magnification ratio which is good enough for small prints or social media. If I want to blow-up a frame I can extend the tubes and take 4 shots which gives mindblowing details, it really choked me, haha.

    • @kstrohmeier
      @kstrohmeier 2 роки тому

      Julien, you should make a video!

  • @michaelrivera2748
    @michaelrivera2748 2 роки тому +1

    Great video!!!! I wonder how much more you can squeeze out of your film with some of these FF cameras with multi shot capabilities

  • @christophermorris7616
    @christophermorris7616 2 роки тому +1

    I was fortunate to have been provided the Fuji 100s, with an amazing bellows extension, fitted with a 90mm Schneider large format enlarger lens on a Kaiser 5513 copy stand.
    With scans that open up to 400mb files.
    It’s beyond any scanner that encountered, even Imacon drum scans of some of my past works. When I flip the Kodachrome transparency 35mm to the backside, The scan I was picking up the layers of the dies in the film emulsion, was actually mind boggling to look at on my monitor. Of course this is an extremely expensive system that was sent me. But it does show me that going forward turning a good digital camera into a scanner is an extremely viable and efficient option

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      Very interesting to hear, Christopher. I actually just picked up a 100s and will be experimenting with that.

    • @RamoArt
      @RamoArt 2 роки тому

      That sounds fascinating. Do you still have those scans of the backside of the film? I would love to see that

  • @samtenthije2419
    @samtenthije2419 2 роки тому +1

    I think there is also something to say for having smaller files from the lower resolution medium format scans because of storage space. Sometimes it's just not worth having huge image files if you are not plannig to do much (e.g. printing) with them anyways. You might as wel chose to save on storage space in that case and get professional scans for the negatives you intent to print, or for any other reason you might need the full resolution

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      For sure. It'll be different for everyone based on what their intentions/needs are.

  • @PeteEdmunds
    @PeteEdmunds 2 роки тому +1

    My GFX 50R set up is nearly ready. I’m using a micro nikkor 55 mm which came highly recommended in many of the forums. Have the essential film holder, but still looking for a good solid copy stand that won’t break the bank. Some of the adapted photo enlarger stands look great, but it seems difficult to pick them up now at reasonable prices.

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +1

      I actually just bought the 60mm Contax macro for my GFX100s setup. As for a copy stand, I just bought this one after searching for a lot of solutions. www.novoflex.de/en/products-637/desktop-studio-magic-studio//repro-products/magicstudio-repro-2794.html Novoflex stuff is rock solid, and so far it's been great! Only downside is the height. It wasn't quite tall enough with the 100s and the Pentax Macro 120mm, but should be good to go with a shorter focal length.

  • @Humungojerry
    @Humungojerry 2 роки тому +1

    i was looking at the 7artisans macro lens for scanning but reviews suggest it’s rather soft at the edges even stopped down. seems like you got good results though - i had always previously been looking at vintage macro lenses (canon FD, nikon etc)

  • @mohammadvarzideh780
    @mohammadvarzideh780 2 роки тому +1

    Hello Kyle .
    Negative Scanning untill last week for me was really frustrating with my epson 4990 . Last week i started to scan my negatives with my nikon d7000 and the resaults was decent . As you mentioned the big advantage is the speed .
    Regards.

    • @Nobody-Nowhere
      @Nobody-Nowhere 2 роки тому

      Epsons work best as contact sheet scanners, scan the whole roll at one go and choose what frames you want to actually use.

  • @CuDerRaGer
    @CuDerRaGer 2 роки тому +5

    I think I’ll stick to my plustek. It’s so fast and good. Medium format is usually paid work so I don’t mind lab scans until I save up for a cool scan. I don’t want a bulky setup like this tbh.

  • @devroombagchus7460
    @devroombagchus7460 2 роки тому

    Thanks a lot. Very useful and clear. One thing I don’r understand. Why the investment in a macro lens. For close up, I use a fairly cheap set of extension rings. Since everything is stationary, you don’t even need contacts for communication with the camera.

  • @dalkapur
    @dalkapur 2 роки тому +1

    My experience exactly. I have the same Valoi set up. Xt3, and an adapted Canon FD 50mm macro. The duster works well. No real difference with 120 files with my Epson V550, but 35mm scans are transformed from mediocre to excellent.

    • @CreatorJuice
      @CreatorJuice 2 роки тому

      I have an xt3 and I'm looking at your exact setup with the lens. Do you stitch 120 film? I'm worried about the quality if I do a single shot

    • @dalkapur
      @dalkapur 2 роки тому

      @@CreatorJuice No stitching. Never even thought of doing that. The XT3 gives plenty of resolution IMHO. I few things to consider. 1. For the 50mm Canon lens, you really need to add extension tubes, in order to fill the frame. I use the cheaper Viltrox tubes. 10mm for 120 scans and 16mm for 35mm scans. 2. Set up can be a faff. To improve workflow, I have my copystand and Valoi set up permanently next to my computer. I transfer the files direct to Lightroom using Fuji Acquire software (free) and a usb-c connector. This way, as soon as I click the shutter, the scan appears automatically in LR. Getting Fuji Acquire to work with LR is a PITA. But can be done. 3. A remote shutter release or using the shutter on the Fuji App is quicker than the 2 second timer. Sorry about the brain dump!

  • @hzubovi1
    @hzubovi1 2 роки тому +1

    Thanks for the comparison, would love to see this with a better lens and a Sony a7RIV with pixel shift. Also if by chance you stumble upon a Hasselblad H6D 100mpix, would love to see that with its 400Mpix pixel shift

  • @calvinchann1996
    @calvinchann1996 2 роки тому

    Have scanned this way for a while using my “old” EOS R and the adapted EF 100L macro, with Negative Supply transporter equipment. Much better than my old Epson flatbed which is now only brought out if I use my XPan. One issue that I have is that all of the transporters that I see are better if you have uncut rolls, but even so, the first frames are never taken up by the transport mechanism and have to be pushed through manually until the film reaches the mechanism. If your rolls are old and have been cut for storage, the first frames on each strip need to be manually pushed through meaning that the transport mechanism is only used for half the frames on each strip.

    • @valoico
      @valoico 2 роки тому

      You are totally right that archive scanning is a problem. It's actually relatively hard to do this, though of course not impossible! We have been looking into it - though I'm not sure how much of the community would be interested in paying a premium for it - personally what I do is just push the rollers out of the way and manually move the film through when it's a strip.
      - Arild

  • @david.robertson.photography
    @david.robertson.photography 2 роки тому

    I now digitally scan with my 45mp mirrorless Nikon with a previous mount 60mm macro which I owned before returning to film photography recently. I find it better to use a low output level for the backlight and under expose the scan a third or so because there seems to be a disparity of lighting across the thick and thin areas of the original film. I then add some exposure/contrast compensation in post. When scanning medium format film I take several scans across the image, number dependant on whether its 645, 6x6 or 6x9. At the moment I pano stitch these in LrC before reversal. I have had no problem with matching the images but the film frame do not usually align (even if they have been Transform aligned first). That might be more about my Essential Film Holder device's 'looseness', or Lightroom. I do get a better stitch in Photoshop but Negative Lab Pro doesn't usually like the .dgn file that Ps produces. I have yet to try previously reversed image 'pano-ing'...

  • @cedarandsound
    @cedarandsound 2 роки тому +1

    With 120 film it's easier to get closer and do multiple shots to ultimately end up with a stitched "panorama" shot to get the whole negative. I've done some 6x9 negatives scanned as high as 13000 x 10000 pixels just by taking multiple offset shots to get the whole negative.

  • @williamdevereux9086
    @williamdevereux9086 2 роки тому +1

    I think you may need to try stiching medium format images. It does mean an increase in workflow time over the more simple single shot, however, I am getting greater results in both sharpness and tonal range than with a ~£2k Plustek 120 scanner using a Sony a6300 and the same 7artisans lens. I have also found it far more intutative and less time consuming than the scanners with software such as Silverfast and Epson Scan 2.

  • @pauld2216
    @pauld2216 2 роки тому +3

    Been amazed at my GFX100s + Pentax 645 120mm macro setup. I have the scanning setup on a small table that I am not touching and use the self timer to avoid any shake. I may experiment with tethered shooting when I get the family negatives to scan. I am using the skier sunray copy box. I had to just adjust the plug from a US style to Aus style.

  • @TiffinboxTV
    @TiffinboxTV 2 роки тому

    Timely video, Kyle. I've been eying my 20 year plus film archive and was wondering about buying a film scanner (but I have both 35mm and 120mm negs) or using a flat bed. I like this option the best. What camera stand do you recommend? Don't see that listed above. Also, I do have a 80mm Fujifilm macro lens that's ridiculously sharp. Been using it with my XT3. So, that should do the trick. Now to invest in a contraption to hold my film negs and a clean light source.

  • @SatanSupimpa
    @SatanSupimpa 2 роки тому +5

    The Laowa 65mm macro for aps-c is a very well regarded lens, while still being quite cheaper than some flagship macro lenses.

    • @kevlarnegative
      @kevlarnegative 2 роки тому +1

      Just ordered my copy for scaning negatives on my XT4, now waiting for the essential film holder.

    • @valoico
      @valoico 2 роки тому +1

      Not tried this one, but another Lawoa I tried had terrible distortion...
      -Arild

    • @michaelhaarstad2130
      @michaelhaarstad2130 2 роки тому +2

      @@valoico I definitely recommend giving it a try. The reviews at optical limits demonstrated virtually zero distortion on that Loawa 65mm macro. While less important for scanning there's zero fringing as well, pretty incredible lens. Based on those results it quite possibly beats out the Fuji 80mm macro. I moved up to it from the 7Artisans mark 1 and thoroughly enjoy it. Admittedly it costs twice as much though.

    • @mpk33
      @mpk33 2 роки тому +1

      A Tokina 100mm 2.8 Macro will give you stunning results at a reasonable price. It's a sleeper lens made in Japan.

    • @KevinBjorke
      @KevinBjorke 2 роки тому +1

      55micro-Nikkor & an adapter, $60-70

  • @charm2501
    @charm2501 2 роки тому +2

    First comment! Great rundown of hopefully what film shooters can do to get the most from their negatives and combat film costs to keep shooting!

  • @paulcrawley7321
    @paulcrawley7321 2 роки тому

    Great video Kyle, I am going to use the Nikon D850 and Sigma 105mm macro which should give good results and they are both coming down in price both new and used.

  • @Aviator168
    @Aviator168 Рік тому

    I found using small aperture can bring up more of the film grains while large aperture can lose some details due to more difficult to focus precisely, but it great reduces film grains.

  • @privatebydesign1808
    @privatebydesign1808 Рік тому

    For dust and scratch removal of camera scans if you have Photoshop there is a very powerful built in solution. Open your image and go Filter - Noise - Dust & Scratches, remarkably powerful and easy to finesse. For problem files I make a copy of the image layer and apply the filter to that then black mask it and ‘paint’ it in, but it is very good even in semi auto modes.

  • @johndukekisch1111
    @johndukekisch1111 Рік тому

    Thank you Kyle for the excellent explanations across the board and for definitely giving other welcome options to the Nikon Coolscan. Question though, I have a Leica Q2 (which has Macro ring) and though I know it can't shoot all-that-close to a 35MM negative on the light box, I'm wondering if the 47 Megapixel size would make up for having the camera higher up on the copy stand rail?

  • @old_guard2431
    @old_guard2431 Рік тому

    I agree with your conclusions. I have been fairly happy with my older Epson flatbed for medium format and up. And my old Minolta film scanner was OK for 35 mm, although slow and finicky. But not good enough to be worth figuring out how to get the serial interface going with a newer computer.
    I have a light table on a copy stand, which works fairly well with the Epson film/slide holders. (Canon DSLRs with a Canon macro lens.) Definitely going to give Valoi a look - more convenience for not a bad price.
    Too bad Nikon went out of the film scanner business, but you can’t argue with the economics.

  • @NickSmithPhoto
    @NickSmithPhoto 2 роки тому

    I've always been interested in a set-up like this (or similar), however I think what's always turned me away at the end of the day, is that there doesn't seem to a set-up for making images for 4x5 negatives, which is why I think I've always stuck with my flat bed. I do really like the scans the Nikon produces, though again, it doesn't do 4x5, however this camera scanning definitely comes close. If I was able to swap out the flat bed for a digital photo set-up, I'd definitely do it, but I think it would require some saving up, as you mentioned in the video, I think you'd ultimately want a GFX to really justify and make it worth while, especially on larger negatives.

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      Sounds like Valoi is working on a 4x5 holder. I'll be grabbing that once it's out.

  • @peterfarr9591
    @peterfarr9591 2 роки тому

    Oooo, try film scanning with a film camera next!

  • @eladtall
    @eladtall 5 місяців тому

    Best video

  • @sdkgodeacs
    @sdkgodeacs 2 роки тому

    Now I just want a Nikon CoolScan!

  • @KrisFlint
    @KrisFlint Рік тому

    I have been enjoying your videos I have recently been watching them as I am thinking of getting into a medium format camera, your reviews are very helpful.
    I do have a scanning background and it would have been nice to see what results you could get with more professional Epson Flatbed Scanner like the Epson V850 I this would be considered the entry level pro scanner in their range.
    The Epson V4990 scans at 4800dpi with 9,600dpi with Micro Step (sub scan) and is 16bit grayscale and 48bit colour
    The Epson V850 scans at 6400dpi optical film scanning resolution with Dual Lens System, the dual lens scans at Super Resolution Lens 6,400x9,600 dpi, High Resolution Lens 4,800x9,600 dpi. It has 4800 dpi reflective and film area guide scanning and is 48bit in/out.
    There is a large difference in the quality of scan results between these models, especially with slides and negatives/film.

  • @martin-f5482
    @martin-f5482 2 роки тому +1

    Hi, thanks for the video. Quite interesting to get them.
    I sold my EPSON V850 last year and switched to camera scanning. I wasn't happy with prints form the epson scans even after many hours of editing. I used them for 5x4" black&white stuff.
    After using a XT4 with a old Leica 60mm macro lens I'm so happy. Printing on A2 paper is really great.

  • @just_eirik
    @just_eirik 2 роки тому +4

    I don’t do film scanning, but if I were to suggest a couple of lenses to do it with, I would suggest the Laowa 100mm macro lens (full frame) or the Laowa 65mm macro lens (crop). I have the 65mm and it’s amazingly sharp and has basically no chromatic aberrations. I bet either of them would be great for this purpose.

    • @mastaw
      @mastaw 5 місяців тому +1

      They're good, but the 65mm is very close to the price of the native fuji 30mm macro. At that point I would go with native glass. I don't know about other brands though.

    • @just_eirik
      @just_eirik 5 місяців тому

      @@mastaw The Laowa does go to 2:1 magnification though, which I think is rare on first party lenses. I think Canon has a 5:1 lens.

    • @mastaw
      @mastaw 5 місяців тому +1

      @@just_eirik Ah I wasn't aware of that.

  • @nygmaa
    @nygmaa 2 роки тому +4

    Invested in a camera scanning system because it was obviously the best choice for scanning different formats at good quality and good price! It's cheaper if you obviously already own a digital camera ofc.
    A camera with +40MP for 120 and above would be a great upgrade though.
    I've been using the Sony A7III with the Sigma 70mm F/2.8 with the Essential Film Holder, it's been great!
    I really think a high pixel camera with a good lens could beat the Coolscan for 120 and above though I might be wrong.

  • @ThoracicRadiology
    @ThoracicRadiology 2 роки тому

    Nice video, thanks for sharing. Quick question - do you manually set the aperture and let the camera handle the shutter speed? Also, did you turn off the lights in the room when you acquired the images? Thanks.

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +1

      Yes, all lights were off in the room. For the first batch of images I used aperture priority mode with almost a stop of over exposure. But this is something I’d probably tweak moving forward.

  • @tassadar1977
    @tassadar1977 2 роки тому +1

    I prefer the Nikon 9000, but not everyone can access these. The advantages for me are image quality, convenience, workflow, desktop space, and digital ICE. People often forget that spotting their images with DSLR scanning is an additional pain.

  • @owenhaupt
    @owenhaupt 2 роки тому +1

    Might be worth it to some to know that the resolution differences will differ from format to format based on the lens (focal length) you are using, and minimum focus distance, etc. When I scan on my mirrorless setup, 35mm ends up being the most cropped and 67 fills the most of the sensor.

  • @AngeloHinojosa
    @AngeloHinojosa 2 роки тому +1

    I bought the 7art 60 macro a while ago in preparation of scanning my own film. I have yet to buy the rest of the equipment for camera scanning but after watching this I'll commit to scanning my own now. Thank you. Do you have a video on the process of transferring these digital camera scans to the computer and then editing them?

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      Hey there, I have a few videos that show my process with different software

  • @FrankFiene
    @FrankFiene 2 роки тому

    The only thing I can imagine to get better results with a Coolscan is bigger formats like 8x10 if you don‘t want to stitch.

  • @stevecorscadden5218
    @stevecorscadden5218 3 місяці тому

    Great video. I already have a GFX 50R but do not have a Pentax lens and have never used adapters before but at the price of the Fuji macro lens it is a very interesting proposition. Just so I am clear you set the camera to auto and the lens on the A setting and the camera and lens talk to each other? I shot film back in the day when film was the only medium and at the height of the COVID lock-downs I came back to film and now shoot both.

  • @thebullion24k
    @thebullion24k 2 роки тому +4

    I've spent way too much on my DSLR scan set up, optimizing every component to top DSLR scanning spec only to find out NLP converts negatives horrendously, I have no clue what's going on, but glad to see it worked out for you.

    • @1331photo
      @1331photo 2 роки тому

      There’s a number of variables that makes scanning with a camera a little tricky. Getting everything refined takes some time. I’ve been fine tuning my setup for about two years, and until just few months ago, really got everything really dialed in. Here’s some things I’ve learned that have made the biggest improvements:
      1. Having a bright enough light source.
      - Not having bright enough light source will make all color scans look yellow or brownish.
      2. Use a macro lens.
      - I found after months of trial and error of using a zoom lens with extension tubes gave really bad results. I tried a prime lens with extension tubes and it was better, but once I got a macro lens, image quality went WAY up.
      3. Use the histogram on the digital camera.
      - If you don’t give your SLR enough light when taking a picture of your negatives, NLP to compensates in post and color film can look really bad.
      - Watch your histogram. You want the data more to the right side.
      - Dense negs will need more light, thin negs will need less light.
      4. Shoot in manual mode.
      - This goes along with step 3. I’ve gotten the best results from keeping a fixed aperture and ISO, then adjusting shutter speed for exposure.
      - Dense negs will need more light (slower shutter speed) and thinner negs need less light (faster shutter speed)
      - Overall, I use a faster shutter speed to help reduce vibration.
      - Match the negative to look the same on the lcd screen as it looks to your naked eye and you’ll get a properly exposed negative.
      5. Learn Negative Lab Pro.
      - This step is a lesson all on it’s own (and this post is LONG 😆) so I’ll keep it short.
      - mess with all of the settings until you understand what each adjustment makes.
      - white balancing correctly makes big improvements. Auto WB works sometimes, and some times you’ll need to make manual adjustments.
      - There are a bunch of different color profiles to use. Try them until you find one that looks the best with your negative. I use different profiles for different negs.
      6. Manual focus your SLR lens on the film grain to get the sharpest image.
      - This takes some practice on finer grain films, so shoot a roll of 800 or 3200 speed so you’ve got some chunky grain film. Zoom in as far as possible with your SLR and slowly manual focus on the grain. You’ll see when it comes into focus, and your neg will look sharp.
      It takes time and a lot of trial and error to get great film scans, but it is possible. I hope some of these tips help out! 😎🤘🏻🤘🏻

    • @sebastianfichtner1876
      @sebastianfichtner1876 2 роки тому

      Did you correct the whitebalance, then croped the image and only then converted the image? This should solve it…

    • @thebullion24k
      @thebullion24k 2 роки тому

      @@sebastianfichtner1876 I've tried everything believe me

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому

      Hmmm, strange, I've always had such good results with NLP compared to everything else.

  • @Prashant.Khapane
    @Prashant.Khapane 2 роки тому +1

    Kyle, this is so timely. I've got 50R now and was thinking of updating kit for digital scanning. I've used A7ii in the past with FD macro. What are you doing to avoid light from other than the source? Valoi seems like an interesting alternative. I was thinking about nagative supply holder as it does 4x5 as well.

    • @KyleMcDougall
      @KyleMcDougall  2 роки тому +1

      Not doing anything about stray light other then turning everything else in the room off and blocking my window.

  • @ma-bn8jh
    @ma-bn8jh 2 роки тому +1

    Are you reading my shopping list? When you put out the Pentax 6x7 vs 67 ii. I had just got the 6x7 : ). I have been debating the epson vs DSLR scanning as my next purchase. I am about to order the ttartisan 60mm today. Loving the 6x7 by the way. I'm getting into 35mm panoramic photos with the 6x7.

  • @RichardSilvius
    @RichardSilvius 2 роки тому

    If I took anything away from this video it’s I want a Coolscan!

  • @MM-mo9hn
    @MM-mo9hn 2 роки тому +2

    I've been scanning with an a7r4 and macro tubes for a while. Swapped to a dedicated macro lens... made all the difference! Colours and resolution. So would recommend a 1:1 macro lens.

    • @mpk33
      @mpk33 2 роки тому +1

      A Tokina 100mm 2.8 Macro. BOOM!

  • @StuartWeir
    @StuartWeir 2 роки тому

    Hey @Kyle McDougall, I'd be interested in a video of you showing _how_ get get great sharpness with your Fuji APS-C for 135mm film. What's your process for determining sharpness before you do your scans? There isn't really a good tutorial on this on UA-cam.