RC Smart Plane E-flite Night Timber X - 1.2M STOL 3D Airplane w/ LED Lights! - TheRcSaylors
Вставка
- Опубліковано 13 тра 2020
- Buy the new e-flite night timber x here: bit.ly/3JAjKVa
Check out this brand new smart plane, the e-flite night timber x 1.2m stol 3d rc airplane with led lights. This is the upgraded Timber X, but with lights, spectrum smart, and a couple other upgrades. We are so excited for our maiden flight, but make sure you subscriber and turn on the notification bell to see our night flight!
Disclosure: This description box contains affiliate links.
Buy the E-flite Night Timber X here: bit.ly/3JAjKVa
Battery 3s: bit.ly/3GWe8mh
Battery 4s (what Nate flew on): bit.ly/3H358Mr
Favorite Charger:
Transmitter:
Smart Battery Checker: bit.ly/3GYbZXi
Lipo Alarm: bit.ly/3uY3U2p
The products in this video are rated for ages 14+.
Support TheRcSaylors
Patreon & Stickers | / thercsaylors
Merch | www.thercsaylorsyt.com/shirts
Mail | 1140 Carter Ave, P.O. Box 361, Ashland, Kentucky 41101
Social Media
Facebook | / thercsaylors
Instagram | / thercsaylors
Twitter | / thercsaylors
Vlog and Live Channel | / thesaylorsytchannel
SPECIAL THANKS TO OUR PATREON FAMILY!!
walter stimax, Raymond Hausele, Priyan, michael baney, Jose Valentin, Don Burwell, Chuck R, Ryan Alexander, Gary Zion, Chris Hamlett, Chris Herbert, Richard Higginson, Robert Hawkey, TA Zorek, Ian Coulson, Richard Bereczky, Jack Richardson, Richard Addison, Mike Gaffney, Mickey, john salt, Dan Conroy, David Chenzoff, Gary Burt, Russel D Cluphf, Nathan Storer, Banks McDade, Ron Erickson, Jeff Acevedo, W.Dunbar, Jeff Buys, Zachary Betz, Eddie Williamson, Terry Kellogg, Doug Dahlheimer, Jesper Larsen, Michel J. Gaudet, Ian Houseman, Alan Savage, Matthew Brooks, Kevin Trappen, Jamey Crowl, Michael Califf Sr, Pete Schmitt, Haar Bear, and Robert Hipp
#rcplane #rcairplane #rc - Наука та технологія
Buy the new e-flite night timber x here: bit.ly/3JAjKVa
Check out this brand new smart plane, the e-flite night timber x 1.2m stol 3d rc airplane with led lights. This is the upgraded Timber X, but with lights, spectrum smart, and a couple other upgrades. We are so excited for our maiden flight, but make sure you subscriber and turn on the notification bell to see our night flight!
Disclosure: This description box contains affiliate links.
Buy the E-flite Night Timber X here: bit.ly/3JAjKVa
Battery 3s: bit.ly/3GWe8mh
Battery 4s (what Nate flew on): bit.ly/3H358Mr
Favorite Charger: bit.ly/3BsM7BU
Transmitter: bit.ly/355t2tg
Smart Battery Checker: bit.ly/3GYbZXi
Lipo Alarm: bit.ly/3uY3U2p
The products in this video are rated for ages 14+.
Support TheRcSaylors
Patreon & Stickers | www.patreon.com/TheRcSaylors
Merch | www.thercsaylorsyt.com/shirts
Mail | 1140 Carter Ave, P.O. Box 361, Ashland, Kentucky 41101
Social Media
Facebook | facebook.com/thercsaylors
Instagram | instagram.com/thercsaylors
Twitter | twitter.com/thercsaylors
Vlog and Live Channel | ua-cam.com/users/TheSaylorsYTchannel
SPECIAL THANKS TO OUR PATREON FAMILY!!
walter stimax, Raymond Hausele, Priyan, michael baney, Jose Valentin, Don Burwell, Chuck R, Ryan Alexander, Gary Zion, Chris Hamlett, Chris Herbert, Richard Higginson, Robert Hawkey, TA Zorek, Ian Coulson, Richard Bereczky, Jack Richardson, Richard Addison, Mike Gaffney, Mickey, john salt, Dan Conroy, David Chenzoff, Gary Burt, Russel D Cluphf, Nathan Storer, Banks McDade, Ron Erickson, Jeff Acevedo, W.Dunbar, Jeff Buys, Zachary Betz, Eddie Williamson, Terry Kellogg, Doug Dahlheimer, Jesper Larsen, Michel J. Gaudet, Ian Houseman, Alan Savage, Matthew Brooks, Kevin Trappen, Jamey Crowl, Michael Califf Sr, Pete Schmitt, Haar Bear, and Robert Hipp
#rcplane #rcairplane #rc
i realize Im kinda off topic but do anybody know a good site to stream newly released movies online ?
@Noel Dakota Lately I have been using flixportal. Just search on google for it =)
You guys are a breath of fresh air in a mad world. Thank you for your videos!
Thank you Blake, that really means a lot to us 😃👍⚓😎
If anyone doesn’t have a Night Timber ….you need one!!! Especially someone looking for there 2nd or 3rd plane. This plane makes flying in the later light hours and even at night much easier, and even enjoyable. Even though I can fly in my yard it sometimes is after dark when I get home from work and this plane allows me to fly at any time. Even in pitch black darkness.
I’m late today stay safe out there all happy flying ⚓️⚓️⚓️⚓️⚓️😎😎😎😎😎😎
The RCSAYLORS are awesome and I enjoy all the videos guys 👍👍👍👍😎😎😎😎 Nate and Abby
You’re doing a climbing knife edge because you don’t enough speed,key to knife edge is to get your speed up,roll it on one side and maintain altitude with the rudder,nice plane thanks for the video guys!
I watch everyone of your videos and they are very informative. Just wished they would be making these planes in the states.
Wed absolutely love to get behind a company that manufactures RCs in the States for sure. Buying from Horizon is currently as good as it gets (there are some others as well) because you are helping to employ many people here in our country. Also, simply by watching our videos you are helping our local economy because Abby and I buy local as often as realistically possible. It's good to have economically conscious people such as yourself supporting us. Thank you! 👍⚓😎
Well that does it. Guess this is my next plane.
Just when I thought Timber was going out of date... Bam! someone turned on the lights.😎
Lol awesome comment 👍⚓😎
She's an awesome bird! I've looked at both if the Timber X models and really want one. Unfortunately I got a PT-17 and an Aeroscout recently and my wife would likely get miffed if I bought one. Also, having to create some space for storage. What a great problem to have! As always, thanx for the vid, saving my sanity. Be well and stay safe
SWEET PLANE, AWESOME MAIDEN!! Love the lights! Thanks Saylors for the fun maiden review!! 💟👍😘
Looks great :)
🙌🙌🙌
I have always wanted to get into the hobby. Thanks to you guys I just had my first flight on the sport cub s 2! I had a blast. You have a new lifelong fan! 😊
I have 4 timbers, the timber x, turbo timber 1.5 and both timber umx planes. The timber x was my second plane that ended up being my trainer plane when I started flying last fall and is the best plane I have. It is perfect every time and always a blast to fly. It was easier fir me to learn to fly on the timber x than with my carbon cub with all of its bells and whistles. Abby if you have not flown the timber x you need to, it is so easy to fly, you will enjoy it so much.
I greatly enjoyed the video and your thoughts are a great addition. The way that you have set up your format draws a person into the excitement that you folks are feeling and makes the time go by quickly. Keep it up!
I’m trying to decide on my first plane and am doing a “run through” of your videos to find the right one and the right transmitter. Very helpful…..
RC planes are sweet they look like so much fun.
Ya know?? I really enjoy your videos. Especially on Drones, Planes and helicopters. Having been associated in the hobby for a NUMBER of years, I think where the hobby has gone is good. BUT!! One of the aspects I miss MOST is the building and crafting of a plane from sticks and covering and sometimes only plans to go with. I know people just wanna get in the air, but one of the most satisfying, rewarding parts of the hobby is the PRIDE you have on a well constructed machine. What a joy to have others admire all the work you put into that. The things you learn about the plane too are the whole aspect of WHY it fly's, the IMPORTANCE of weight and balance and the engineering behind making it happen. REALLY REALLY miss those days. MANY MANY MANY Manufacturers had kits around that just aren't there anymore. So sad. We taught ALOT of younger generation pilots what aviation entails.
In any event, good luck on all your future endeavors.
We have done a handful of Adam's board builds from scratch and while they were very rewarding, they also just didnt hold up in comparison to just about any foam plane. I'd LOVE to actually BUILD a plane from scratch, but honestly for me it probably wont happen for a very long time. My build is my UA-cam channel. Something that we have truly built from scratch that we are VERY proud of. From 0 subscribers and 0 views to where we are now, all thanks to very hard work, blood, sweat, and many tears. It has changed my life more than building a plane ever could and affected millions of people from all over the world. All with a positive attitude, never bringing anyone down. Our UA-cam channel is our kit build.
@@TheRcSaylors Oh I absolutely agree with you. It takes a massive amount of time to build. Especially a Scale plane. At one time, we had about 100+ club members and used to sponsor fly-in's and contests and even invited to our local mall for display, Q&A twice a year. I even had the local Radio station come out for a 3 hr live broadcast once. BUT!! I couldn't agree with you more on the path of your UA-cam channel. I know even with the planes and R/C stuff you feature, that it has a major positive impact on several people. VERY proud of you and Abby's efforts and the work put in for the success you so greatly deserve. I have long thot about doing a channel myself and as an avid hobbiest in the smart phone photo world, just the time alone to edit is crazy. So by no means am I condescending your work, time and money's spent to build it. Love this channel. I have told several people myself to check it out. You guys just keep on doin and I'll keep on watchin and promoting.
Just wanted to say love you guys, and it's nice to see a couple enjoy a hobby together! Been into rc cars for over 30 years, just bought my first house and theres a rc airplane club and field across the road, thinking this planes going to be my 1st....
Wow Nate!!! Amazing new tech!!
It sounds like Nate really enjoyed the plane! And then getting to geek-out about the battery tech...a banner day for him! :-)
Nate starting to invent moves.....love the "climbing knife edge". Best reviews no nonsense just the facts. All done with positivity and humor. The slo-mo effects really look great...keep on doing what you do so well. You make a great team!
P.S. Since she mentioned her talent, I won't be happy till I see Abby twirling a baton.
Thank you so much! That really means a Lot to us Alfred. Oddly enough, we had no slow motion effects in this video. Can you time stamp for us?
Really nice plane ! I love all the features. 👍🙏⚓😀
Awesome 👍 😎 plane guys and I enjoy the videos ❤️😎 have a safe day like it cool 😎👍👍👍👍😃
Nice plane! Be fun flying in the evening for us vampires! 🐾🐾🐾🇺🇸
👍 HobbyZone F9 simulator is a good learning tool on flying 3D if you are new too it! Better to learn and fly on a simulator than going out and crashing you're new RC for sure! It has helped me for sure...
Thoroughly enjoyed this video showing the excitement of flying one of these Timber X 3D planes. The interaction between both people is entertaining and you can feel the emotions they experience while flying the Timber X. I plan on buying the Timber X BNF some time in the near future as I am training with my Apprentice STS and also flying the Timber X on a Buddy Box and Trainer who is allowing me to use his Timber X. Took off and landed the X and am amazed how well it can be controlled by me in Safe Mode. Not attempting any 3D moves yet, of course, but enjoying how comfortable it flys. Short takeoffs are fun and landings are slow and sure. A wonderfully designed foam plane.
Thanks for the video. I hope you guys do a video of the timber on floats or skis.
Thanks for the awesome video. On the XBC100 smart battery tester, when checking smart batteries you do not need to plug in the balance lead on the battery to see the individual cell voltages.
Thanks guys nice aircraft, hoping the will come out with a UMX version, I have the original Timber has been great Aircraft. Stay Safe Thanks for all your videos!!!!
Great flying Nate, Timber X looks great. Nice zooming Abey, Jeff in LA USA
Love it. That's the problem I had with my temper is the landing gears seem to break very easily so you have to be very easy on landing the timber. I learned that the hard way. Lol . God bless you guys you guys are great
It's truly a awesome plane. I didn't care for it when it first came out, because they discontinued the Ultimate2 at the same time(love that one), but now I do. The lights and smart are great additions. Nice flying, nice camera work Abby. You and Abby should fly them both at the same time!!?? AirHammer out!!
Nice, like the plane would be a lot of fun and an every day go to plane.
Great demo! 👍❗
Thanks 👍⚓😎
E-flite as really taken their planes to a all new level with the safe mode and the GPS fence. Someone like me thats never flown before and pick one up throw it in safe mode and its look mum no hands..hahahaha!
Gone are the days of a beginner's plane being some little rink dink tiny plane. these 1.2mm to 2.0mm planes are perfect for beginners. and depending on where you shop online or off they area very budget minded plane.
I'd love to see a demo of the heavy steel spar in the tail with flaperons on for some awesome 3d flight!
Love this new nightTimberX! Can you do a flight video when it's dark out?
Well Imwas forced to order one. My first “real” plane. Thanks for all of your videos and imput !
Early crew
Woot!
Nice plane, I like it 👍👍👍👍
Looks nice! I'll be interested to see the night flight.
Coming soon! 😀
I just got mine!! Thank you for the review. Can you give some advice on the placement of the receiver antennas? I found one loose in the fuselage and the other in a protective tube. I just want to make sure there isn’t a specific place/position for the loose one. Thanks for you help.
This is an absolutely must have! 3 or 4 s battery! Great maiden Nate and Abby!
Thanks Kevin! I totally agree my friend 😃 If you happen to pick one up, please consider doing so using our link. Helps us a lot 👍⚓😎
I will totally use your link! I support your channel anyway I can. Proud patreon!
You are so awesome Kevin, and we thank you for the support 😃 Hope to fly with you one day!
best job ever, work at home with family wake up late all play and no stress
Sweet!
great review and nice plane
Thank you very much for tuning in 👍⚓😎
Great plane and video
Thanks 😃👍⚓😎
love the climbing knight edge lol
Hey great vids! There’s Safe and I have a few. But still confused...what does as3x give that safe doesn’t have? Thanks!
Damn I love this plane it’s gonna be my next one ☝️
Sorry! I'm a little late today! (Wasn't expecting an early video!)
Great video by the way (as always!)👍⚓👍
Yeah we worked overtime to get this one out early. Very exciting new release! I love this plane 👍⚓😎
I've flown the timber X with 1300 mah 4S and 3200 mah 4S. It doesn't matter, I bet it would fly fine with 1000mah. It flies great at all battery weights.
Nice guys. Love all ur videos. Nice plane, wish i had space for something like that around me. Plus i live within 5 miles of an airport.
Hope you can find an rc airfield close!!! It is so much fun!
@TheRcSaylors, recently came across your channel, great videos thanks for your work! Question, have you ever tested the top speed of the Timber X series planes?
I have the NX 8 transmitter with the BNF templates. Does it only have one setting for throws! I thought with the template it was completely set up in the radio already.
Great video!
Thanks Andy 👍⚓😎
Nice job you guys !!!! Love the Vid's !!! Please tell me the difference between the turbo timber and this night timber ? Thankx Happy and safe fly N' !!!!
Have you flown the E-Flite Maule? How does the Timber compare to the Maule or even the Durafly Tundra V2? I'm looking to make my first purchase on a plane. I'd Like a STOL. Have you looked at the specs for the E-Flite Freedom Fox?
Hi Nate and Abby, first of all, great channel love the all the information you provide! I purchased the Carbon Cub S+ as my first because of the video you made. Anyway I really like the Night Timber X, but first I need to get another transmitter. I see you are using the spectrum DX8, is that the one you recommend for this plane, or can I use the dx6? I only have the one that came with my Cub. So I would need to purchase another one. Thanks for all you guys do!
New sub here, excellent video, my mouth is watering, I ordered one of these, it will be here Monday! My first airplane, coming from drones and cars. I definitely intend on installing the slats, Im very excited about the low speed capabilities of this airplane. Im torn on starting with 3S or 4S, I have both, but Im concerned about getting in over my head with the 4S. I havent been this excited about something in a loooooonnnnnnggggg time. Maybe back to my first car, an Associated RC12E, I raced at a place called Rattys Raceway in N.Attleboro MA. Its long gone now, Im talking late seventies! Thanks guys, great channel, great review!
So how did you do with this plane now since its been a month? Hope this wasn't too much 3D of a plane for being your 1st. I just picked mine up this past weekend and had a hand full on the maiden and couldn't figure why it seemed so tail heavy with 4s battery up to front and only the carbon tail spar in rear and not the steel one. Trim issues I'm guessing. 7th plane I own and it had me nervous. Just curious how you did with it being your 1st plane.
New to RC Planes, and really enjoying this channel! Will this plane bind to a Taranis transmitter? I'm assuming I just won't get the added benefit of safe flight?
I plan to return to this hobby after 25 yrs. This plane looks like a good start thou its a bit price. Would the Valiant be a better choice?
Great video. Nate your (and Abby's) enthusiasm for the hobby is infectious. You guys got me started bashing with some WL Toys dune buggy and more recently flying with the Hobbyzone Champ.
I'm so envious and jealous of you guys. I wish I had the skills to fly like that. This morning I did get in a 10 min. flight on my Champ without crashing. The air was perfectly calm. I had battery left but just wanted to take the 10 min. win. So am I ready for something like this Timber? 😁
it's so hard to judge your abilities. It's easy to fly but it's $300. There are a lot of other great 2nd planes out there. Horizon has the T-28 for about $170 or the night radian....what type of flying/plane do you want?
@@ab7rs Thanks for commenting. I know I'm not ready for plane like that. I was trying to make a joke about jumping from the Champ to that Timber.
What transmitter should I buy for this knight timber? I really don’t want to throw good money after bad. And Buy a DX and whish I woud have got The NX
Is the freewing f9f a good buy? IT is one of the cheapest edf that i have found
Dose the battery checker work on venom battery’s ?
If you had to pick between this plane and the Flex Innovations Extra 300 G2, which would you pick?
I am a new pilot with two planes under my belt, but only about tehn flights. I had a completely unexplained crash with my Carbon Cub S+ yesterday and I want a new plane. (So far, no one on the forums has been able to figure out what happened.) So I am confident enough to fly and land the plane, but that's about it.
I like that the FI 300 has an on/off switch for the lights on the transmitter, and I prefer the looks of the FI 300. But if the FI 300 is a bigger challenge than the Night Timber then I'll go with the Night Timber. I can't afford too many crashes.
what's better , the TIMBER X 1.2 STOL (a bit of an aerobatic) or this plane ? ALso , what about comparing those 2 to the TIMBER TURBO 1.5 ? I need the best one for the money (i dont' like bottom feeders but maybe these are good enough to overcome )?
Hi - I started a couple of years with a Turbo Timber. Instructor didn't want to use any safe technology. I was allowed to fly for 10 seconds per sortie because wasn't demonstrating straight and level. Am using RF9. What would you recommend.
Where did you P/u the battery checker ?
I have a DX6 2gen, i amd new at this and need your help.
a friend of mine wanted to put new planes on my dx6. But he could not do it . so he ask me it he could delet all my planes. I said go on and do it. but he still could not put them on.
I don't know how to do it.
Can you tell me how to do it?????????
Thanks
Rick
This is awesome! Ordered mine this morning. Love that they give you a free hat with it :-)
That's awesome!! Totally missed the free hat 😃 Any chance you ordered it with our link to help support us?
@@TheRcSaylorsI'm not sure if I used the HH email or your link. I think I ordered before I got the email letting me know you guys had a new video.
No worries my friend, I appreciate the honest follow up. Helps us keep the lights on and content rolling. Please keep us in mind for the next purchase 😃 Thanks!
@@TheRcSaylors Now that I know that, I will from now on. I do make it a point to let all the ads on your videos to play all the way through ;-)
That is very awesome of you! Hey, every bit helps a lot right now. 👍⚓😎
Nice flight , good looking plane, yes y'all need a 1.5 turbo timber you will love it
Does using a lot of Rudder in a turn cause a stall?
i have a problem i am new i have been flying the carbon cub s+ now moving up to the Ranger 1800mm i have a DX6E and got everything done except for the high and low rate the book tells me to 16mm but my radio has it into percentage don,t know what to do Please Help never seen a video
Hello Nate and Abby. Thanks for the great video. I have a timber X and I really want to like it. I cannot get the plane to fly level as the tail just seems to drag. I am running a smart 2200 4s and it has the carbon spur in the back. Any suggestions? Thanks
First thing I would check is that the CG balances correctly. The manual should specify the location - usually a certain distance or range behind the leading edge of the wing. With the airplane in flight-ready condition, except with the battery disconnected (for safety), verify the airplane balances level or slightly nose-heavy (gently teeters just a bit forward rather than the nose falling sharply) at the recommended CG point. (If a range was given, try for a spot toward the front of that range.) A tail-heavy airplane will be very unstable and drag its tail. A severely nose-heavy airplane will fly like a brick and require a lot of airspeed to stay airborne.
If the CG is fine, it might be worth checking the manual to see whether the AS3X system needs to be calibrated. My guess is that it auto-calibrates each time the airplane is powered on, in which case the only suggestion I’d have is to make sure you are placing the airplane on a level surface within a few seconds of powering up the airplane so that the gyros calibrate correctly.
Might also be worth checking that the elevator surface is level with the rest of the horizontal stabilizer when you are not giving any control input (“hands-free”) and the airplane is level. If it is tilted upward significantly, make sure the elevator trim on the transmitter is centered/neutral (check its manual for instructions if you don’t know how to check this). If the tilt remains, you’ll need to apply downward trim or adjust the pushrod/clevis to correct the alignment (again, the manuals should walk you through the steps). BTW, if the pushrods were already connected to the control surfaces by the factory, you shouldn’t need to make any adjustments to the pushrods; unless the factory made a mistake (rare, but not impossible), the setup should be correct.
Hope that helps.
@@chadpollman7970 Hello Chad. Thank you for the reply. I will try all of these options. I am thinking it might be the latter. I need to make sure that the elevator is level at zero trim. I saw that Pilot Ryan is flying the new Night Timber X with a smart, 2200 3S, 2200 4S, and a 3200 4S. I have all of these batteries, but I could see no way of shoe horning a 3200 in there, and the 3S is so light. I am probably going to go flying this Wed. Thank you again for the reply.
Awesome video and plane!! I have been thinking about getting back into the hobby after about a six year brake. Any suggestion on a smallish plane with as3x and safe? I have a little over an acre to fly on. Thanks again for the great videos, God bless.
I have the perfect recommendation for you! This little guy is definitely one of the best RTF planes on the market. We like it so much that Abby and I each own one!
bit.ly/2VK2MxY
@@TheRcSaylors One more question... I know that I will be ordering another plane or 4 in the future. What spectrum transmitter would you recommend and do all there receivers have as3x/safe? By the way the sport cub s2 came in today!! Thanks in advance for the help!
Would u recommend this as first plane? Had a couple helis and a couple cheap drones, all ground rigs now. Always wanted to try planes. Seems like it could be a first plane w/ SAFE function I like the STOL
As long as you have a pretty basic understanding of aviation (sounds like you do) then I personally say YES. This plane has a lot of room for Growth. Just please keep it in SAFE for a good handful of flights before venturing out. Huge favor: if you do purchase it, please consider doing so using our link. It helps support our channel at no extra cost to you. Happy to help with any questions you may have along the way! 👍⚓😎
What is the best plan for me I have not ever had a rc plan
Hello, What Radio do you use with this plane? Great Video, thanks.
Oops, see you use the 8 right after I submitted my comment.
So what is the difference between nx6 and the dx6 which do you prefer and recommend
Here is a video we released which should help to answer your question - ua-cam.com/video/pIFICrUG8JY/v-deo.html
With a 4S 2200mAh could this plane fly for 10 minuts or more in a scalle flight (no acrobatic)????
Does this come with floats and when will it be available? Horizon shows backordered.
It is available for preorder right now and will ship in about a week 😃 They have them in stock in their warehouses. You can buy the floats for the Turbo Timber and they fit this plane perfectly! If you plan on buying this plane, please consider doing so through our link. It helps to support our channel at no extra cost to you! Happy to answer any other questions you may have. Thanks 👍⚓😎
Nate, something I tried yesterday in "repairing" my Carbon Cub S+ and I would like your opinion. I had a void on the body and decided to try Gorilla Glue (the type that foams with water) and it filled the void perfectly and did not harm the foam. Have you tried this or what is your opinion about using this glue? Thanks.
Gorilla glue is one of the best glues you can use for foam planes. My Dad uses it all the time and I use hot glue. Just preference for me as it's a bit quicker. Having an 18 month old baby around means very little time to work on my RCs, lol. Happy Flying 👍⚓😎
Now you can find someone else and do spot landings, see who can land the shortest distance specially if you can throws the motor the opposite direction
Thank you, you just gave me an idea with the new credit card I just got in the mail today
Happy to show this plane off, its amazing!! Huge favor: if you do plan on buying it, please consider doing so using our link as it helps support our channel at no cost to you! Thank you and Happy Flying! 👍⚓😎
@@TheRcSaylors most definitely,
Lol the grass and the trees would be red too!
Lol, yeah... wasnt my best intro ever 🤣😂👍⚓😎
@@TheRcSaylors keep up the awesome videos! ❤
Same as the vision aire night
Would you recommend this or the valiant for my second plane ?
Valiant for sure
@@earlmauger3961 Ya Earl, you're right. The Valiant is a more forgiving rc airplane than this. The Valiant is a great second plane that you can learn basic aerobatics on.
I have a Knight Radian.
Wow... $300😕!
Still, though, thanks for telling us all.
When we gonna SEE Amelia manning the controls of something? 😘
Keep on keeping on, kids!✨🤗✨
Very nice plane don't mind giro's but hate safe. Would rather a buddy box. Safe programs novice pilots into so many bad habits to start (i'm a club instructor). If they stay on it to long they end up thrashing about on the sticks in normal (proper) mode .Although does it allows novices to fly ish but it will never let them perform a victory roll but at least it safe. Plane looks cool in night livery thought
I have to disagree! I've witnessed hundreds, if not thousands of people get into the hobby that wouldn't have otherwise because of SAFE technology. We tend to encourage people to get in to flying over discouraging them. I love seeing the hobby Grow!
Edit: There are a LOT of people that don't live near a flight instructor like yourself but still want to enjoy the hobby. I help those people daily, and have for years now. I too help people learn to fly in person, but with COVID being a "thing" now I'm going to continue encouraging people to get into the hobby the best way possible. Thanks for what you do for the hobby, but please don't discourage people from flying simply because they don't do it "your way".
Think we have a difference of opinion, because of geography I'm from England where access to local clubs are plentiful most people are within a 30 mile radius of a club so its easier to get that tuition. The biggest reason I said I hate SAFE is I like being in control. I learnt to fly back in the 1980's as teenager and obviously we didn't have all the gizmos we have now. I've always encouraged people to come into the hobby. I can easily save people a 100 pounds (SAFE is expensive) recommending the right plane with tuition. (Helps get the youngsters into it)
You've been lucky with Covid to keeping flying. We had horrible weather from January till lock down in March. Then we had lots of beautiful calm days pining out of the window while working from home. Just got out Yesterday for my first fly in over 5 months boy it was good
@@TheRcSaylors I don't know about SAFE. I've flown about 6 flights on my first plane, the Carbon Cub S+. I used SAFE on my first flight to safely land the plane, but on subsequent I used SAFE to set up the approach and then I landed it myself. I liked the holding pattern and safe return features on those first flights. A couple weeks ago, I had less than two minutes of fight on a newly charged battery and out of the blue it went into a steep descent with SAFE on and flew into a tree. I gave it full up elevator with full throttle, but to no avail. The plane came down from the tree a couple days later. I did the necessary repairs and flew it again yesterday. I did the CRAP check. My controls were all operating normally and returned to neutral position. A friend hand launched the plane at full power and immediately after launch it just wanted to dive. I gave it full elevator and full throttle, and I was able to get it climbing, but it was doing all it could to dive. I inched off the elevator just a bit to bring it back down, but dove straight down at about a 70-degree angle from 100' or so. Did SAFE cause that? I really don't know, but in my traipsing around the RC forums I am bumping into more and more people who have similar stories with SAFE. I just don't trust it now.
Hi guys,follow you a lot,my question is I want to buy an X,maybe turbo,my problem is I have 3 Zop 4s 3500 new packs,if they will fit I'm going to purchase a plane,lol.Can you give me physical demensions of battery compartment to see if they will fit? Even if I have to trim slightly,lol.Thanks much,Rick
Both the Turbo timber and the Timber X recommend 3-4s 2200-3200 mah lipo battery. I think you would be able to fit a 3500 in there but im not sure. I would suggest go to a local hobbystore or maybe a clubmember that have the timber that you can ask.
thanks,that's why I was asking here,they have both planes and hoping to get a measurement
I had a Carbon Cub S+ which I flew about 6 times before it inexplicably crashed. Horizon Hobby thought it was a problem with the GPS so they agreed to send me a new plane, but this time around I picked the Night Timber X. I have also purchased a Conscendo glider based on your reviews of each plane. But now everyone is telling me I’ve purchased two planes I’ll surely crash. So some questions:
1. I have six Carbon Cub S+ flights under my belt. Do you think I’ll be able to fly this plane in SAFE without much worry?
2. .Someone told me this plane is easier to fly than the Conscendo. Is that true?
3. I don’t mind slowing the plane down with the front slats. Are there other downsides to the slats I should consider?
Yes, I believe you can fly this in safe with your current experience. The Consciendo is definitely more beginner friendly than this, no doubt in my mind for many reasons. I believe you'll do fine with both planes though. No need to worry. Whoever is currently giving you advice doesnt sound like they are in a place to give said advice.. sorry!! You've got this!! 👍😃😎⚓
@@TheRcSaylors Tremendous. I'd rather fly the Conscendo anyway. My fear did. convince me to purchase a flitetest foam board plane so that I have something I can crash and get it back up and flying for less than $10.
@@TheRcSaylors I flew the Conscendo today for the first time. In my opinion, it’s easier to fly than the Carbon Cub S+.
The shipping is too expensive on horizon hobby can we buy it on ebay or amazon..? 😊
What country do you live in my friend? It should be free shipping.
Maybe a stupid question, but what is an ESC brake?
The ESC brake makes the prop stop as sson you idle the throttle. Without it, the propeller will keep spinning after you idle the throttle
@@antonl1894 ah, makes sense. Thanks for the reply.
@@dannydgeek No problem mate
Timer X? Is it called that because it has an integrated flight timer or something?
#typointitle
Title updated. Possible auto correct on that one. Thanks 👍⚓😎
Why do you say not for a first plane when it has safe? I want a plane but i want one that i wont out grow after learning, suggestions?
If a person has a pretty basic understanding of aviation and how to fly a plane it very well could be a first plane for someone but honestly most people probably wouldnt benefit from this being their first. There are always exceptions to a general statement like that, obviously. I will post another comment response with a more docile plane that still provides a lot of room for growth, and is much cheaper than this plane.
bit.ly/2Q0yvbr
This is the plane that I'd recommend for a more advanced beginner such as yourself. Flies very docile and super beginner friendly, yet has a Ton of room for growth. Weve featured this plane Many times on our channel.
Thank you for your reply and suggestions !
Hi, could you guys suggest any bi-planes that are beginner friendly?
I would say a Eflite PT-17. Some of my clubembers have it and it flys pretty well.
Have you flown anything at all? Stay away from anything that says PITTS. A Waco, a PT-17, a Tiger Moth are good biplanes. Just make sure they have Stability Control(gyro) and a recovery mode(safe). AirHammer out!!
@@antonl1894 Thank you that a lovely looking plane. Just need the @TheRcSaylors to review it.
@@airhammer6203 No not flown anything yet. The Dynam Tiger Moth looks good and I have a soft spot for Moths as I have had a flight in one.
@@nbaker01 the Dynam Tiger Moth is the easiest to fly, a touch tricky to land(narrow landing gear), should be even easier with the Admiral RX600SP receiver as long as you have a Spectrum radio and set the receiver up correctly. Dynam aircraft can be a little frustrating to put together and sometimes have flaws. Once built, Dynam planes do fly great. I own a couple. On YTube do a search for the Dynam T.Moth, there are build videos and flights. Check out NitroPlanes video, it just floats up there! I love the Dynam Waco. I also have their Pitts M-12.
I just bought this plane, and is a snappy wipper snapper!!! The throw on the control surfaces are impressive, fly with cuation, I actually just used a flysky 6, so there's no safe select on it., The dsx radio has the controls to reduce throw. I actually did a loop and it hit a she'd crashing, it only broke the prop! The plane is beefy!!!! So I went with a 11*7 prop, the original was a 13*4 prop.
Actually a really good price. Under 700 and you can get everything you need to fly and even the floats.
Ok, you crashed your Timber X. That worries me, since I was thinking of getting one as my 3rd plane and limited experience. Since someone with your flying experience crashed the plane, I was wondering why. Was it strictly pilot error or a characteristic of the plane. Is it hard to fly.