FTX Ravine Vs £1,000 "Golden Goat" Axial Capra
Вставка
- Опубліковано 14 жов 2024
- Took my FTX Ravine round the BERCC course.... Ran into Tomley RC, with his "Golden Goat" Capra, played a lil follow the leader. Thanks to Tomley RC for his input to this video.
BERCC:-
www.facebook.c...
Tomley RC:-
/ tomley79
My Facebook page:-
/ sharkys-garage-rc-and-...
Good old Ravine, very capable, glad i got one 👍👊
Awesome trucks
@@SharkysGarageRCandMore amazing for the money. I like ftx stuff. You need extra steering channel and that would improve it so much. Nice vid!
@@carlbModels i might up rate the servo's, and maybe some different tyres and beadlocks, but given the wheel/tyre combo on the golden goat cost more than the ravine.........
@@SharkysGarageRCandMore I think the tyres are fine - looks like the rear wheel steer takes you off the bridge - if you had 3 channels you would have better control. Which is something I need to do on a couple of my trucks! rws is cool until it gets you into trouble more times than it gets you out! the Ravine punches so far above its weight that it almost doesn't matter about the tyres - just look how good it is!
@@carlbModels there is another video that goes live in a week or so that shows why i am trying the no foams approach
This course look great. Can't wait to put mine through its paces
The BERCC is awesome, go join their Facebook group, say hello, and tell them i sent you !!!
Top vidéo 📼 😊
J'adore le ravine, pour le budget et aussi les performances
I received mine just the other day, such a capable rig! It's my first rc car and I definitely recommend it to anyone.
I've never driven an rc crawler and filmed my first run yesterday. Free mods coming next haha
I've also found the steering arm flexes like crazy and causes bad bump steer (front and rear) so I ziptied an old car antenna on to stiffen it up and it works a treat!
@@justletitsliiide not had bump steer issues with mine at all
I've found when climbing aggressive terrain one wheel can become lodged and your Ackerman angle goes haywire. Like enough to do definite damage if heavy throttle were applied.
I essentially beefed up the linking arm and the wheels stay far more parallel to each other.
It only happens on harder climbs or really grippy surfaces
instablaster...
We have the Danchee Ridgerock.
The EXACT SAME RC as the FTX Ravine.
We actually have two.
I love it.
If you put on good sticky tires I have the Danchee Ridgerock.
The EXACT SAME RC as the it will climb trees.
Nice video.
Yep, the original tires are a bit hard, but you can improve it a little by taking one bead clamp ring off and removing the foam filler. The tires are stiff enough to support the truck without them. Also add some weight to the axles. I used sticky backed alloy wheel balance weights, scrounged from my local tire fitting guys.
Love this crawler course! Bedfordshire?
Yes B.E.R.C.C
And exactly what i have done with tyres and wheel weights....
@@SharkysGarageRCandMore Ah yes, a friend has some wheel weights on his Gmade R1 crawler. They were made on a lathe by one of the guys at work using some scrap copper billets. It's a better idea than my sticky weights on top of the axles, because it's even nearer to the ground. Many years ago I was a tire fitter and would go to farms to fill their tractor tires with water. We had data about the max volume to apply, so that all the weight stayed below the center of the axles.
I put lead airgun pellets in tyres 🙏🤠
That was a fun day hope you like the mods to the Ravine seems to work ok and a bit different from the norm
Great you had tomley with you 👊🏻👍🏻
Its almost like we spoke before hand and knew each other were going to be at the BERCC that day 😜
Just an FYI, the Redcat Danchee Ridgerunner is the same vehicle, and it is described by Redcat as "splash proof" but specifically states it is not water proof and should not be submerged. I assume that means the axles should not be submerged as the servo and motors are axle mounted.
Thanks for that info, i have no plans to do a "Tomley RC" and send it swimming....
Here from Tomley and great full 👍😎😃
Thankyou, i hope you like my channel. Thanks for commenting.
I was looking into this for my son,but I've read that the outdrives are plastic with no option of metal upgrades. Otherwise this looks like a great little crawler. We may end up getting the Mauler.
With the weigh of this truck you don't need to go to metal.
It doesn't need cvds
I saw a tip on another video that said to remove the foam inserts from the tires to make them softer and grab onto obstacles better.
Yup, did that on my latest video. The rain was the counterpoint to that.
@@SharkysGarageRCandMore how much does the remove foam mod actually work? or is it stop gap at best?
Amazing video friend👍👍👍
Thankyou, trying hard
New to the hobby and just ordered one of the ravines
Good stuff chap. Maybe check your steering trim, looks like it's pulling to the left a tad.
Yup, needed a lil tweak
Definitely very capable rig worth every penny
Heck yes. Can't wait to see how it goes with no foams in the tyres
@@SharkysGarageRCandMore better according to a few people 🙂
@@Fonzierc worth a try, look out for the "impossible hill video"
I put a bracket under the bonnet on mine to mount the batteries on. Its better with the c of g further forward. An incredibly capable vehicle.
Nice idea, i may try that.
Currently looking at body swapping to something interesting....
Got one of these but in 4ws the inner wheels catch the side stays , any ideas as I tiewrapped them together for the time being
What do you mean by the tie stays ? If its easier, send me pictures via messenger on my Facebook page ??
Hoping you'll be able to help me out if you can please. Been looking for a RTR 4x4x4 monster truck. Would the Ravine be able to take big rims? If it would I'm thinking it'd be perfect. Not looking for performance. Just messing about. Cheers.
Yes, it has good clearance, you might need to fit bigger servos, but you should be able to fit the massive tyres off a cheap "Monster Jam" monster truck, as they are quite light.
@@SharkysGarageRCandMore cheers. Really appreciate the reply. Really don't want to be messing around with anything as I don't have the patience. Ah well, I shall continue on my quest. Cheers.
@@Basin79 changing wheels is a 2 minute job.
Changing servos would only be necessary if you find that you need faster turning
@@SharkysGarageRCandMore oh I know the wheels would be easy, it was just having to fanny about with the servos I was concerned about. I'll have a nosey into it all. Once again cheers for the reply.
I enjoyed a great video let's be friends 😊😊😊😊😊
우리 친구 해요.~~^^
Ravine has so much potential but let down by tyres and a bit of weight. Bargain truck though 😎👍
Have another video with the foams out of the tyres, and more weight on the front axel, really helps.... Check out my Ravine Playlist
Seems like everyone is a winner. The Capra is clearly smoother and a total boss but the Ftx holds it's own well. I don't know why so many slate it when it's so capable. I'm going to ask Santa for one...!
Since this time i have done a couple of tweaks to the Ravine, taken the foams out of the tyres, and gorrilla taped the body.
Only other thing i might do is swap out the servos, but we will see how it runs next time out.
Ooh if you do the servos, please post a video as I'd love to do mine too. This is my first rc so I will take all the help I get offered haha
@@justletitsliiide will see how it goes with the changes i have done so far, but yes if i do change them i will be sure to do some videos on it
Can it run on a 2s lipo without any mods except changing the plugs ..? Cheers
Not tried, i am not currently located where my ravine is, else i would check, but i believe it has a lipo/non lipo jumper on the esc
Mr Mrs has a ravine and she runs it on the 7.2 NiMH makes a big difference
Dave Barker ok but I was asking about lipo batteries
@@notlrachtron yeah I know but we haven't tried lipo but as far as I know there is no low voltage cut off on lipo but the NiMH do give a performance boost
@@notlrachtron will have a look Wednesday/Thursday when i am back at mine
Hey buddy. Get some
Stock FTX mauler tyres on that ravine abs watch it play happier
What do they work out price wise ??
Around £20 a pair preglued to rims on eBay buddy. I went all out on my mauler making it all metal and 4WS with 2.2 alloys and pitbul tyres but it wasn’t as cheap. My mates got mauler wheels and tyres on his and made a huge difference
@@oldeschoolrcukold5141 awesome, that may be the way for me to go, i am on a tight budget.
i think, if i get one of these, im getting 2.2 axial ripsaw tyres
i think it would be scary on 2.2 ripsaws
If you look at my other videos on this truck in the Ravive playlist, i got some awesome 2.2 tyres and rims from Injora
@@SharkysGarageRCandMore aye, gonna check it out..tho i am also looking into a dig function mod for this, hope i find something, i don't think much could beat this with the right mods considering the price
Mine is not great on wet surfaces either
With metal beadlocks and good tyres, a lil extra weight on the front axle, this thing is kicking butt of way more expensive rigs