I’ve been really looking into the xingbao German sets recently. I love how detailed and well engineered they are (looking past some poor clutch power on some parts). I’m ordering the leopard 2a6, leopard 1a5, and the Puma. I’m so happy you did one on the howitzer…it’s now totally on my list due to the beautiful interior (I tend to make or modify my own interiors so lack their of in some places don’t bother me)
I ended up getting the leopard 2 and I absolutely love it, yes some bricks clutch power sucked while others were too strong, yes the road wheels fell off (but if you invert the rod it works much better), but I just glued some pieces here and there and now I must say I love it more than any cobi set I’ve EVER gotten. It might be me but I absolutely adore this random brand and the detail in the sets…totally getting more now, leopard 1 and Gepard are next for me Btw I’ve never had working suspension on a tank before so perhaps that fuels some of my love for the company but it’s just incredible, also 3 tons camo is cool, and the possibility for detailed interior is very nice so I don’t have to hollow out the inside of the tank like I do with cobi to make an interior
I literally just found out this was a real spg the other day and now here I am watching this vid. Very nice looking model . You should continue making the “asmr sounds with music
Ich habe von dieser Reihe schon fast alle mir fehlen nur noch wenige hat einige gute bautechnicken kann ich nur empfehlen es ist halt ab und zu mal sehr zerbrechlich
Liegt aber größtenteils nur an den Bautechniken und nicht an der Steinequalität. Die ist recht gut. Die Federung wäre viel stabiler, wenn man nicht mit kleinen 2x1 Technik Bricks gearbeitet hätte. 2 weitere große Bars wären viel sinnvoller gewesen. Bei den Laufrollen sollte man auf die kleinen Abstandhalter verzichten. Dann gehen die Achsen weiter rein und fallen nicht ständig ab. Die sind nämlich nicht schlecht, sondern können nur halb eingeschoben werden und das kann natürlich nicht halten.
This to me feels again like one of those sets you assemble once, put on a shelf, never touch again. Over all looks great, however the rubberband reliant suspension assembly is dubious at best, and though stable enough that's a lot of wasted interior space that would been better used for additional infrastructure. Sidenotes. Interesting how this particular model uses one to few tread pieces making them ultra tight while I find on the tanks I've built anyway Cobi uses one to many, and often results in loose, unresponsive treads. One less on either side, and I surprisingly found the trads work fine on any surface on both the most recent Sherman as well as Maus models. Also very interesting part usage here in the rear corner of the tank using the minifigure flipper piece.
The rubberband suspension isn't that bad, but they should have fixed the structure around better and didn't use 1x2 bricks. 2 longer technic bars on each side would do a better job.
@@BrickMeet genau diese Kleinigkeiten verderben einem den Bauspass . Auf jeden Fall sollte man Schmerzfrei sein und improvisieren können 🤷🏼♂️ Und was die federung angeht bin ich gespannt wie lange die Gummi's durchhalten.
@@stephanwenger7413 ich habe jetzt schon einige panzer dieser Reihe und das schon länger mein erster war der leopard 2a6 und die Gummis sind bis jetzt noch ganz die halten ziemlich was aus
Ich habe die komplette Serie. Die Haubitze war eines meiner ersten Sets und irgendwann hab ich Sekundenkleber ausgepackt... Mittlerweile hat sich die Qualität aber extrem verbessert!
I built the new revised set (available in Germany from Bluebrixx since mid-December 2023). Assembled parts no longer fall off so easily. The gun barrel still cannot be held in position. It's just too hard for that. An optional support would be nice.
Guten Abend @BrickMeet 😊... Ja, die Bundeswehr Serie gefällt mir sehr gut muss ich sagen, aber bei diesen Sets streiten sich meine inneren Geister 😂😂😂... Klar, wenn die Modelle stehen und halten, dann ist alles gut... Und genau das ist das Problem dieser Reihe...die unterschiedliche Qualität der Teile. Deswegen habe ich tatsächlich noch keines dieser Modelle. Als alter Grenadier wollte ich mir den Marder natürlich zulegen, aber als ich dann mehrere Reviews gesehen hatte, die alle das gleiche Problem hatten an der Heckklappe, schreckte es mich vom Kauf ab 😞. Vielleicht hole ich mir erstmal ein günstiges Set, wie den Fennek z. B.... Mal schauen. Am meisten stören mich übrigens die grauen Ketten bei den meisten Panzern... 😞... Fürchterlich... Aber, alles nur meine Meinung 😊. Die PZH2000 sieht schon klasse aus, keine Frage. Vielen Dank für die Vorstellung und bleib gesund 🤘🏻 😎 P. S. Zwei zusätzliche Glieder je Seite, oder insgesamt? 🤔 Schau mal bei @Stein_auf_Stein zum Ziel vorbei ☺️... Andreas hat so ziemlich alles aus dieser Reihe 👍🏻👍🏻👍🏻👍🏻.... Und er freut sich bestimmt, wenn mal so ein bekannter UA-camr reinschaut 😎😎😎🤘🏻
2 pro Seite und damit saß die Kette keineswegs locker, immer noch straffer als bei COBI. Die 79 Tracks pro Seite scheinen mir schon fast ein Fehler in der Anleitung. Damit hat sich alles verzogen.
Schönes Video. Habe auch das Set,1 Kettenglied mehr und passt. Das Kanonenrohr habe ich um ein paar Steine erleichtert,dann steht es nach oben und es steht. Für den preis ein gutes Set,außer man möchte nur nach anleitung bauen,dann eher Finger weg (meine persönliche Meinung). Gruß
Can you please make a video about the XB-06042 (PUMA). It is also from the same brand and if you add one track link more on each side of it the tracks run really well and it also has a really nice suspension.
If only some of their parts would have a tighter fit. These are actually great models. Though its nice to know you have the same parts that always fall off
The Rubber bands at the suspension are too strong at first but it will loosen up if you give it alot of tension, but i think giving it a perfect rubber band will do the trick
ich habe den Leo 2 von Xingbao und der hat genau die selben Probleme die Rollen fallen ständig ab und das bauen war ein Graus alles in allem ein schönes Model wäre nur toll wenn Cobi es bauen würde da gäbe es nicht solche miese Qualität
Autsch 😫 Xingbao @ Blue Brixx 😬 Na wenn das mal gut geht.... Ich hab den Puma aus der Serie gebaut um es abzukürzen war nicht so Toll. Vielleicht gebe ich dem Elefant noch ne Chance....Muss das Pannenfahrzeug ja irgendwie vom Schlachtfeld bekommen 😏
by lego? But that's very new to me, that Lego is suddenly making military equipment... I honestly can't imagine that... that would contradict Lego's own rules
@@DefinitelyNotEmma I hope Germany will finally pay for its years-long ignorance and russia sympathizing policy. So better be thankful to Ukrainian people defending your hasteless European lifestyle so that you can enjoy your coffee and croissants in the morning while many Ukrainians are waking to shelling and missile strikes every day.
@@kevinschmidt8101 no panzer means armor , not necessarily tank, though panzer does mean tanks if used alone .however, panzerhaubitze would mean armored howitzer.
I’ve been really looking into the xingbao German sets recently. I love how detailed and well engineered they are (looking past some poor clutch power on some parts). I’m ordering the leopard 2a6, leopard 1a5, and the Puma. I’m so happy you did one on the howitzer…it’s now totally on my list due to the beautiful interior (I tend to make or modify my own interiors so lack their of in some places don’t bother me)
uh, be very careful with that leo 1. i have it and it was anightmare to build due to bricks simply falling off.
I bought The german m113 and The tracks was soo bad
I ended up getting the leopard 2 and I absolutely love it, yes some bricks clutch power sucked while others were too strong, yes the road wheels fell off (but if you invert the rod it works much better), but I just glued some pieces here and there and now I must say I love it more than any cobi set I’ve EVER gotten. It might be me but I absolutely adore this random brand and the detail in the sets…totally getting more now, leopard 1 and Gepard are next for me
Btw I’ve never had working suspension on a tank before so perhaps that fuels some of my love for the company but it’s just incredible, also 3 tons camo is cool, and the possibility for detailed interior is very nice so I don’t have to hollow out the inside of the tank like I do with cobi to make an interior
This is because the Bundeswehr sets were commissioned by a German company (Bluebrixx) because they only sell them in Europe
Very underrated channel. Keep the great work mate
I wish cobi would make this.
Same bro i regret buying cobi ww-2 su-100
But i turn into something tank 🗿
And for me the french AuF1 155 mm
Cobi was make the AHS CRAB
@@andisijaya4656 why? It’s such a good set
I literally just found out this was a real spg the other day and now here I am watching this vid. Very nice looking model . You should continue making the “asmr sounds with music
really like the track-wheel stretch scene..so fun to watch
YESSSSSSSSSSSSSSSSSSSSSSS, LAST ONE, XINGBAO BRICKS ON BRICKMEET, OMG!!!!!!!!!!!!
Ich habe von dieser Reihe schon fast alle mir fehlen nur noch wenige hat einige gute bautechnicken kann ich nur empfehlen es ist halt ab und zu mal sehr zerbrechlich
Liegt aber größtenteils nur an den Bautechniken und nicht an der Steinequalität. Die ist recht gut. Die Federung wäre viel stabiler, wenn man nicht mit kleinen 2x1 Technik Bricks gearbeitet hätte. 2 weitere große Bars wären viel sinnvoller gewesen. Bei den Laufrollen sollte man auf die kleinen Abstandhalter verzichten. Dann gehen die Achsen weiter rein und fallen nicht ständig ab. Die sind nämlich nicht schlecht, sondern können nur halb eingeschoben werden und das kann natürlich nicht halten.
This to me feels again like one of those sets you assemble once, put on a shelf, never touch again. Over all looks great, however the rubberband reliant suspension assembly is dubious at best, and though stable enough that's a lot of wasted interior space that would been better used for additional infrastructure. Sidenotes. Interesting how this particular model uses one to few tread pieces making them ultra tight while I find on the tanks I've built anyway Cobi uses one to many, and often results in loose, unresponsive treads. One less on either side, and I surprisingly found the trads work fine on any surface on both the most recent Sherman as well as Maus models. Also very interesting part usage here in the rear corner of the tank using the minifigure flipper piece.
The rubberband suspension isn't that bad, but they should have fixed the structure around better and didn't use 1x2 bricks. 2 longer technic bars on each side would do a better job.
@@BrickMeet genau diese Kleinigkeiten verderben einem den Bauspass . Auf jeden Fall sollte man Schmerzfrei sein und improvisieren können 🤷🏼♂️
Und was die federung angeht bin ich gespannt wie lange die Gummi's durchhalten.
@@stephanwenger7413 ich habe jetzt schon einige panzer dieser Reihe und das schon länger mein erster war der leopard 2a6 und die Gummis sind bis jetzt noch ganz die halten ziemlich was aus
WOW! 멋져요!😍😍😍😍😍😍
I have this set and I have to say that it is pretty good. Other good sets from this series are the Flakpanzer Gepard and the Leopard 1 :D
Einfach nur Hammer
Класс, хотел бы себе такой же набор
Atleast they try with the suspension on the sets, though I really think that they can improve on this and make it better
"Overall the model is very stable" he says as parts start falling off. But yeah a pretty nice model.
More video like this please
Nice tank
I might pick this up for my self
Her cannon is so perfect
Make more about Xingbao' s Germany weapon sets, please
Great video. I would like to see on this channel a video about the designer XB-06046 Xingbao Heavy conveyor SLT Mammut
Krrrrrrrrruuuuuuuuuuuuuuuuuuuuuuu bang (the kruup is the shell flying to its target, the bang is the shell htting target)
Ich habe die komplette Serie. Die Haubitze war eines meiner ersten Sets und irgendwann hab ich Sekundenkleber ausgepackt...
Mittlerweile hat sich die Qualität aber extrem verbessert!
Those elastics were nightmares 😭(proceeded to build the model without them)
Modern Maus
nice video brickmeet!
I built the new revised set (available in Germany from Bluebrixx since mid-December 2023). Assembled parts no longer fall off so easily. The gun barrel still cannot be held in position. It's just too hard for that. An optional support would be nice.
I would love to see this set by cobi
Nice
so satifanying sound
By the looks of the Inside and outside I can tell the designers have never seen the artillery piece in real life
Great vid good tank
How can i fix those barrels because i have the panlos maus and the gun doesn’t stay in place
Use Lego pins with more friction or small peace of thin paper in a ball joint
Thank u so much i tried it and it worked
You should make a video of the F-4 phantom of the German Luftwaffe
So good
Guten Abend @BrickMeet 😊... Ja, die Bundeswehr Serie gefällt mir sehr gut muss ich sagen, aber bei diesen Sets streiten sich meine inneren Geister 😂😂😂... Klar, wenn die Modelle stehen und halten, dann ist alles gut... Und genau das ist das Problem dieser Reihe...die unterschiedliche Qualität der Teile. Deswegen habe ich tatsächlich noch keines dieser Modelle. Als alter Grenadier wollte ich mir den Marder natürlich zulegen, aber als ich dann mehrere Reviews gesehen hatte, die alle das gleiche Problem hatten an der Heckklappe, schreckte es mich vom Kauf ab 😞. Vielleicht hole ich mir erstmal ein günstiges Set, wie den Fennek z. B.... Mal schauen. Am meisten stören mich übrigens die grauen Ketten bei den meisten Panzern... 😞... Fürchterlich... Aber, alles nur meine Meinung 😊. Die PZH2000 sieht schon klasse aus, keine Frage. Vielen Dank für die Vorstellung und bleib gesund 🤘🏻 😎 P. S. Zwei zusätzliche Glieder je Seite, oder insgesamt? 🤔 Schau mal bei @Stein_auf_Stein zum Ziel vorbei ☺️... Andreas hat so ziemlich alles aus dieser Reihe 👍🏻👍🏻👍🏻👍🏻.... Und er freut sich bestimmt, wenn mal so ein bekannter UA-camr reinschaut 😎😎😎🤘🏻
2 pro Seite und damit saß die Kette keineswegs locker, immer noch straffer als bei COBI. Die 79 Tracks pro Seite scheinen mir schon fast ein Fehler in der Anleitung. Damit hat sich alles verzogen.
@@BrickMeet das kann nur so sein. Es sah auch im Video irgendwie komisch aus.
Schönes Video.
Habe auch das Set,1 Kettenglied mehr und passt.
Das Kanonenrohr habe ich um ein paar Steine erleichtert,dann steht es nach oben
und es steht.
Für den preis ein gutes Set,außer man möchte nur nach anleitung bauen,dann
eher Finger weg (meine persönliche Meinung).
Gruß
i have 2 of these both came with NO INSTRUCTIONS BOOKLETS !, i also have the Leopard, Merkava IV,
Can you please make a video about the XB-06042 (PUMA). It is also from the same brand and if you add one track link more on each side of it the tracks run really well and it also has a really nice suspension.
I wish i have 1 of those
nice howitzer
i like that tank
If only some of their parts would have a tighter fit. These are actually great models.
Though its nice to know you have the same parts that always fall off
Cool
Gratificante assistir!👏👏👏👏💯
This is the last time i'm going to bother you, but can you please do a speed build review on the Cobi Rafale fighter jet
you should start doing brick mania sets if you can.
Nice use of sound effects
The Rubber bands at the suspension are too strong at first but it will loosen up if you give it alot of tension, but i think giving it a perfect rubber band will do the trick
Will you ever build the Xingbao Leopard 2? 😢
nice
Nice Lego
is not Lego....it is Xingbao
How about polish "Krab" and american "Himars"? Looking forward to see those.
finally you have the balls to do Xingbao speed build lmao
What a strange thing to say
@@firstlast6437 Xingbao tend to have not very good quality build nor brick, so its a miracle he did built it
Could you make a video about the Marder?
I dont know why but xingbao has best quality
I dont know which xingbao you are buying from, but thats defenitly not the case😂
bricks from Cobi are a thousand times better
So coooooooooooooooooooooooooooo
Are enough track pieces included to make both sides run smoothly?
You should have up to 5 extra parts
Yes
Letsa build :D
topp Mist have
❤️❤️❤️❤️❤️❤️❤️❤️
ich habe den Leo 2 von Xingbao und der hat genau die selben Probleme die Rollen fallen ständig ab und das bauen war ein Graus alles in allem ein schönes Model wäre nur toll wenn Cobi es bauen würde da gäbe es nicht solche miese Qualität
כמו אמיתי ממש
Можно вопрос?Что за черный крест на технике???
Autsch 😫 Xingbao @ Blue Brixx 😬 Na wenn das mal gut geht.... Ich hab den Puma aus der Serie gebaut um es abzukürzen war nicht so Toll. Vielleicht gebe ich dem Elefant noch ne Chance....Muss das Pannenfahrzeug ja irgendwie vom Schlachtfeld bekommen 😏
Hi brick meet i wanted to know if there will be ever a new KV-2 tank as this is one of my favorite tank
There is a kv-2 from quan guan
@@fxkekeks2451 ok thank you
Perfect!!!
something about how those bricks look... very cheap
Anyone know what the track is or where it's from? I'm looking to get one of these bad bois and it doesn't feel right without this track
where did u get them all?
Monarch bro😁😁😁
where can i buy it
Next: Mig29?
What is the name of the music used?
i looked in the description and couldnt find anything
Build the Flakvierling 38
Hello
Crawler track links would've been better a bit longer
Remove the turret and small modification u will have an apc or ifv
I search on google the model is like panzer maus
When I bought this set it made my anger issues mad and got angry that i didnt continue it
Panzerhaubitzen 2000 155m tank kanone
Ah yes, panzerkampfwagen vi ausfúhrung b mit 10.5cm kampfwagenkanone
you already realize that it is a vehicle of the present and has nothing to do with your comment
Real lego??
Is this a cobi set ?
As you can read in the video title, it is an official Xingbao set
ASMR
Combat tank
Pzh 2000 maus youngest son
I made a mistake on making this set,i misplaced the barrel
Oh6 Đi
I think the tracks should use a different cog... :/
This kinda looks like the maus
I'm early
I want lego xm1203 nlos-c
by lego? But that's very new to me, that Lego is suddenly making military equipment... I honestly can't imagine that... that would contradict Lego's own rules
Modern warship in monac
Y la munición la reconoce la computadora de tiro del obus?😂
russian armoured units dislikes this video.
Why don't you compare at the jadpanzer e100
such weapons are supplied to Ukraine😎👍👍
I hope Ukraine will eventually pay for the howitzers and tanks they receive
@@DefinitelyNotEmma I hope Germany will finally pay for its years-long ignorance and russia sympathizing policy. So better be thankful to Ukrainian people defending your hasteless European lifestyle so that you can enjoy your coffee and croissants in the morning while many Ukrainians are waking to shelling and missile strikes every day.
@@DefinitelyNotEmma Of course, he will pay with dead Russians. How much do you need?
That's not an Official Lego Set, isn't it?
As you can read in the video title, it is an official Xingbao set
Yeah german tank
artillery
@@valdmenshikov9687 its a panzerhaubitze. In English it would be tank howitzer. So its basically both
@@kevinschmidt8101 no panzer means armor , not necessarily tank, though panzer does mean tanks if used alone .however, panzerhaubitze would mean armored howitzer.
@@valdmenshikov9687 A Panzer is an amored vehicle, so he's eventually correct.
@@lutendoxd3987 kind of but i still don't think a self-propelled artillery is a tank
I was gonna do a very dark joke about the war on Ukraine but I remembered I have a brain to think
Tracks is so breakable