Kickass hot water system unbox & first impressions.

Поділитися
Вставка
  • Опубліковано 22 жов 2024

КОМЕНТАРІ • 21

  • @benwhiteman91
    @benwhiteman91 3 роки тому +1

    Got mine hooked up today and grabbed a 13-10mm reducer which come in elbows or straight. Hooked that up to a short piece of hose pipe connecting into the system. Whats the point of the on off on the shower head? Mine doesnt seem to do anything.

    • @4wdglampingaustralia102
      @4wdglampingaustralia102  3 роки тому +1

      Yeah the on off button on mine isnt really good hey.. It gets jammed and its really hard to flick the switch

  • @benwhiteman91
    @benwhiteman91 3 роки тому +2

    Couldn't you just use normal garden hose which the fittings look to be suitable for?

    • @benwhiteman91
      @benwhiteman91 3 роки тому

      Actually i see, the fittings on the pump are different as opposed to the hose fitting?

  • @G.I_BRO_SHOW
    @G.I_BRO_SHOW 3 роки тому +1

    How you end up wiring up the pump to your battery?

    • @4wdglampingaustralia102
      @4wdglampingaustralia102  3 роки тому +1

      hey Albert, I have 12v batteries in the canopy. Simple 12v from them through a fuse into a switch to operated the pump. You can do the same from your start battery. I can leave the pump on all the time as its pressure operated. Once the pump sees pressure it auto shuts off.. Its a 6ltr Kickass one

  • @rebeccatrannguyen
    @rebeccatrannguyen 3 роки тому +1

    Nice review

  • @timlane4944
    @timlane4944 3 роки тому +1

    Is the 6 litre an hour enough for an acceptable shower,
    And when you turned it up and it came out quicker, does it hold a decent warm temperature?

    • @4wdglampingaustralia102
      @4wdglampingaustralia102  3 роки тому +3

      Hey Tim, Yup its more then sufficient. If your crank the shower to full pressure it cant reach the thermal cut out at 50c. I find 40c is the perfect temp and I did this in 3c outside temp and was super warm. No use going over 6ltr p/h pump for a hot shower as you just cant get the temp up unless you were to pre heat a water bucket and draw the water from that

    • @timlane4944
      @timlane4944 3 роки тому +2

      @@4wdglampingaustralia102 .
      Thanks for replying much appreciated

    • @clemZboubtoila
      @clemZboubtoila 2 роки тому

      So, from a cold bucket you wont reacg the temp unless you cycle the water thru before?

  • @rickiej88
    @rickiej88 3 роки тому

    I'm interested in this system... wondering if they fixed the pump connection problem... also that pump.seems pretty loud hey?

    • @4wdglampingaustralia102
      @4wdglampingaustralia102  3 роки тому +1

      It is a little loud yeah.. I have it mounted in a undertray toolbox now so its ok

  • @terry9119
    @terry9119 2 роки тому +1

    Don't give up your day job.

  • @jimmyp164
    @jimmyp164 3 роки тому

    I'm using it for my caravan can you all so plug it up to a hose connected to a tap

  • @sciencevevolution2362
    @sciencevevolution2362 3 роки тому

    Why a 6litre pump when the system is rated to 8L/min? Did the temp e er reach 50'C?

  • @JRITCHHH
    @JRITCHHH 2 роки тому +1

    Hey mate I'm pretty sure you've done it wrong. You put the tap thread on the "water output". Screw it onto the "water input" and then you can connect a hose straight on it 😅 The shower head should screw onto the output! I brought one (the unit itself) from facebook marketplace today without those components and just used a garden hose tap straight onto the "water input"!! Thank me later 😅👍

    • @4wdglampingaustralia102
      @4wdglampingaustralia102  2 роки тому +1

      Really old vid. Working sensational for some time now. You won’t be disappointed. Do yourself a favour get the new style shower head, the chrome one is terrible. Cheers for the support 👍

    • @JRITCHHH
      @JRITCHHH 2 роки тому

      @@4wdglampingaustralia102 no worries mate , And thank you for the tip 😎👍