how to make 2.1 class d amplifier 120watts make it home
Вставка
- Опубліковано 7 лют 2025
- how to make 2.1 class d amplifier
I am using parts
ne5532 2.1 preamplifier board, tpa3110 amplifier board, tpa 3118 btl mono amplifier board, LM2596 buck board, Bluetooth Usb panal Board, on off switch,rc female socket, speaker terminal, dc socket, wires
cabinet size: width 7.5 inch height 2.5inch
length 5.5inch
how to make subwoofer amplifier :
• subwoofer amplifier it...
Hello Mr KSK, Greetings from Australia. I enjoyed this video very much. I am making similar amps using TPA 2.1 amps? I use solid timber for the case. I like a built in power supply. I like your preamp controls remote from the amp board. It would be great to have a full part list with Amazon or other supplier links plus a full circuit diagram showing all the connecting wires. Have you got these things that you could post up for your subscribers? Thanks so much. Cheers.☮️🌈💚🇦🇺
Yes, absolutely
Keep up tha good work
Thanks for watching
Mast
Thanks 🤗
How do you fix pop up noise when it is turn on or off
Wow super nice 👍
Thank you so much
Verynice
Thanks
Bhai Iska sirf Bass dekhna tha kaisa hai,baki stereo to pata tha,mere pass bhi 3118 mono hai,ye pre amp lu ya na for subwoofer
Good work👍👍👍
Thank you for watch
I like it🥰🥰🥰
Thanks for watching
Also made my own similar DIY amplifier, but only 2 channels, I bought a rectangle shaped Bluetooth, FM receiver ,cause i didn't like the oval shape, and the TPA3110 amp is not good on bass , so I used the TDA8932 which is very good in low and high frequencies.. also housed in plastic casing, but not like yours , I just drilled necessary holes on pre-built plastic casing for electronics.. 😊
Very cool!
@@kskmakes8054 thanks, but your project is a lot cooler..😊
What about TPA3116D2, any good for bass?
@@sasyedji not good.. maybe you need to have a good tone control to compensate for its poor bass response.
Very good making clearly bro.
Thank you so much 😀
can you use external amplifier with this ?
Kitna wattage ka hain ye amplifire?
120watts
Using this same amp board can we boost the output......
Good Work ❤️
Thank you! 😊
BHAI ISKA KITANA DAM HEY PLS PROVIDE ME
👏 bravo from Greece
Thanks for watching
Sangat bagus video anda ❤️👍
Konse power supply apne use kiya or ketne amp ka use kiya?
24volt 5 amp thanks for watching
Is there Subwoofer filter board used to cut off high frequency??
Yes
Super bro, I also actually have the same Idea 💡 to build a 2.1 with those modules. But what is the voltage and current rating you used for power supply???
24volt 5amp DC
24volt 5amp DC
Subwoofer me only bass aaraha hai ya sound
Subwoofer only Bass
@@kskmakes8054 agar bass controller ko 0% or volume.trable 100% kar denge to subwoofer me bass niklega ya only sound niklega
Lem apa tuh kuat banget kayaknya
Good job...
Thanks
You should explain deeply with voice
Hello Mr ksk,greetings from Nigeria can you please let us have the full circle diagram on how you connect all the wires in order to make a successful amplifier as you did so that we your subscriber can really connect it successfully as you did thank you I will be glad if you can post the circuit diagram for we your subscribers thanks
Total cost bro.
Not available
Yeh banane mei itna money lagega ki usse 5.1 board app local market ke buy kar pawge.
I think single board of Tpa3116D2 (50w+50w+100w) will do the trick except Bluetooth USB Panel and step down converter. It will be more powerful, I am personally using it. And I think 5:33 you must put a caution to pre-calibrate Step down converter to desired output before connecting wires.
Thank you for watching
bahkan ada yang langsung ada bluetoothnya,atau pakai zk tb21
where is corrector tone treble - bass?
Very nice bro. Looks like Bluetooth usb board has two audio out connectors, which is missing in my board purchased. Pls share the links to buy the boars
Thanks.
Ok I will try
Simply nice
Thanks
input dcnya nerapa volt ampre
24volt 5amp DC
Products link shear please
I have those buck converters, one for step up one for step down both get dead when i tried to step up to 12v and other to step down to 5v from a solar with 10v 0.5A
Very good your project❤ awesome 🇧🇷😊👏👏👏👏 subscribed, nice bro
Thanks for the sub!
Очень красиво получилось. И сабвуфер тоже симпатичный.
Do you reply also?
did it make buzzing noise?
আমার একটা দরকার তৈরি করে দিতে পারেন
Good job Sir! I just subscribed
Thanks for the sub!
Flawless 🎉
Thanks for watching
@@kskmakes8054 where did you purchase bT board
Ki vabe pabo
Brother mera ko chaya 1 pic ready to use please send me one
How much this amplifier bro
Not available
Filter board konsa use kiya hai
Ne5532 2.1 pre amplifier board
How many amount are spend for this project????
1200₹
Can you make 60Watt Mono class D amplifier with only MIC input.. no Pen drive No AUX no display..only MIC with 3 poteniometers and speaker connection.
சூப்பர்யா....அருமை
Sir. I liked this fyi project Is this entire kit available online with Amazon India. Power supply unit purchased from where. 🎉 Thanks in anticipation.
total parts available Amazon
Please reply what power supply is use in this 🙏🏿🙏🏿🙏🏿
24volt 5amp DC thanks for watching
Thank you 💘
Wow, chota packet bada dhamaka . What is the power supply and how much amp ? And what is the costing of the amplifier? ❤❤❤❤
5amp 24volt dc
Thanks for watching
Ini baru bagus berapa mad hargany
Which board s instalation and their model numbers show me sor
Check Description
ap ny Subwwofer konsa use kia how many inches of it and wats
8 inch sub 100watts RMS 200watts peak
Can it use a saloon car 12v battery?
Yes use no problem but output power down
You can use 12v to 24volt boost converter
Thanks for watching
Total Cost? Noise Floor?
Not available
Sir ji .... 3 channel (2.1) amplifier ki connection kaise karenge ? Jab humhare Bluetooth card mein sirf left right 2 hi channel hein to 3 channel ( 2.1) ko input kaha se denge please help me 😥
You use 2.1 pre amplifier board link 👇
amzn.eu/d/0jWnbpG
@@kskmakes8054 connection pata de bahi board toh koi bhi le lu gayn kaha se ayegi lekin ... You should tech me as well sir 🥺🥺🥺
3118 or 3116d2 which is the best and 24 v healthy or risky pls tell me..I have 24 v smps power supply
24 5amp power supply good for 3116d2
@@kskmakes8054 Thanks sir..and one think..woofer value and size...like ohm watt and 6" or 8" for better performance and safe for this board..pls sir 🙏
8 inch woofer 8 ohm
@@kskmakes8054 thanks sir ..🌹🙏
@@kskmakes8054 watt 50 or above
Amplifier Final Price??
Hi sir es me Ketan kharcha ayega
Where do i get the front piece with the Bluetooth and volume knobs?
Available in Amazon
Hi everyone. Excellent vídeo! I have a question. Can I replace the 3-way ne5532 module with a 4-way one and the tpa3110 2x30w module with the tpa3116d2 2x120w module? thanks!
@kskmakes8054 I need to know if this can be done. Please, help me. Thanks!
Yes
Pls advice. I need Class D Mono amplifier 60watt with only Single MIC input connection, 3 poteniometers. Bluetooth, pen drive not required. where can buy from? available DC supply 12v and 24 volt.
এই বোটগুলি আমরা কোথা থেকে পাব
Available in Amazon
Are you from india
Mujhe aapse milna hai to kaha mil sakte hai
Hola ksk makes me pudes decir los materiales y los wath de cada parlantr
Nice
What is the brand of instant glue?
Anabond cyno 555m
Size to Mila but metirial ka nam kya?
Material PVC sheet
also I wondered what material is the cabinet and do you cut with a laser?
Thank you for watching not laser im use knife
@@kskmakes8054 what material you used to make the cabinet...
You should use Voltage regulator 7805 replace of tepd down circuit
Thanks for watching
A step down converter is more efficient than the 7805 Regulator
Nice👏
Thanks ✌
I want dual audio out put board name plzzz
Podre modificar mi parlante para que suene mas fuerte
Menuda potencia para ser un mini amplificador de 2.1 con unas placas pequeñas
Keren tpi kit amplifer tpa mudah panas dan protec
Kya aap sale karna chahte ho ye amplifier
Not available thank you for watching
@@kskmakes8054 plse sir
Excellent sir
So nice of you
Exlent work
Thanks a lot 😊
A este amplificador le puedo instalar un torna mesa ?
that mini power amp class d is too hot in a tiny heatsink. maybe better replace a better cooling system that makes last long to used
Thanks you for watching
Super okkasari fm kooda on chesthe chalabaguntadi
Ты бы ещё больше корпус взял
Thank you for watching
Better to use tpa3116d2 2.1 amplifier board
No need
❤❤❤
Kiyak yanawada meka hadanna
Y tambien la midida de cable
এটা বিক্রি করবেন ভাই
Where is power supply
Wish i had that
süper(TÜRKEY)
Sir all diagram showing plice🙏🏾
Ok next time
Falto el ventilador para mantenerlo fresco
Thanks for watching
@@kskmakes8054 para que no caliente
Ok
❤❤
Aku mau beli itu
Thanks for watching NO sale
Not clear explanation.explain about bt sub board
isme explanation krneka kya jarurat ic ka name diya hi hai search krke dekhlo Google me dimag bhi use kya kro thora
No brain sir?
7.1 amplifire
kidal
Yes