For those asking the specs on some components, the diagram at 0:12:00 says: R1 = 1KΩ R2 = 220Ω R3 = 220Ω R13 = 220Ω RRes = 2KΩ RDG1 = 2KΩ RD1 = 1KΩ I believe the capacitors are 22pF
Dear i made Temperature controller with Atmega 328P chip and install it on my aquarium it work best but some time if i on off some 220V light or i hv small water 220V 25 watt and air pump 220V 5 watt, controller hanged or restart i tried to use 104 filter cap and some other but no effect can u plz give me some hind. Thanks.
Does the Altium software generate the layers automatically ? Let say you have to connect pin A to pin B but there is a component in the way. Does it automatically generate a layer and connect A to B through a via connection? I've never used a PCB designer software and to me it seems so tedious having to deal with the connection between layers.
probably no. I would say using cable is much better if you want to have diaplay. PCBs are only for microcontroler+sensor+Power voltage in. Other than that, you should connect with cables.
For those asking the specs on some components, the diagram at 0:12:00 says:
R1 = 1KΩ
R2 = 220Ω
R3 = 220Ω
R13 = 220Ω
RRes = 2KΩ
RDG1 = 2KΩ
RD1 = 1KΩ
I believe the capacitors are 22pF
Thanks for this. How's the bootloading done to the ATmega? Can this be done through the FTDI too?
Thank You So much Sir
You made a video of how to make an arduino board
It is very helpful to me
Once again thank you
Atmega's bootloader is done through FTDI too?
Dear i made Temperature controller with Atmega 328P chip and install it on my aquarium it work best but some time if i on off some 220V light or i hv small water 220V 25 watt and air pump 220V 5 watt, controller hanged or restart i tried to use 104 filter cap and some other but no effect can u plz give me some hind. Thanks.
hello, which is the value of the programmer capacitor?
specify in details the components of the board how much capacitor , resistors etc and theirs values we are noob we need much details
thank you
Sir can I use any other microcantroler
Can you pls share the schematics and the Gerber files?
Does the Altium software generate the layers automatically ?
Let say you have to connect pin A to pin B but there is a component in the way.
Does it automatically generate a layer and connect A to B through a via connection?
I've never used a PCB designer software and to me it seems so tedious having to deal with the connection between layers.
No idea
what are the values of the capacitors
Great video sir. I just have one question : does it work with a LCD display ?
probably no. I would say using cable is much better if you want to have diaplay. PCBs are only for microcontroler+sensor+Power voltage in. Other than that, you should connect with cables.
Is this support pwm analog read and write??
Will any problem when i use my own pcb shape
Please I meed help 😢
Wow
Cir-cute nahi hota mery bhai…. Sarcit (circuit) hota hay… 😂