Podľa typu rádia Číňania nemajú licencie na systém RDS... Niektorý veľký výrobca možno áno, ale pri týchto lacných hračkách tam pravdepodobne nie je nikde...
Hello. I installed a Zenec NC3811D unit in my Ford Mondeo mk4 , before restyling (year 2009) with its own canbus. I can control with steering controls, but can't see radio info on convers+. Do you believe that i can fix it with a better canbus adapter box?
Voice control? Is this a joke? The original Bt module does not work by connecting the Android radio. This has been the reality since the beginning. Where have you been until now?
@@SparkFree you wrote : .. It works .... and also the voice control level for answering / canceling a call / mute... I have canbus Hiworld but isn't work it there, so I want try your ....
The function of the voice control lever is to mute and call up the phone book of the phone connected to the radio. I do not give a link to the seller. For one thing, it doesn't work after a few months, and for one thing, people don't read correctly and with understanding... For support, contact the seller and ask him the questions you are interested in. Not always the can bus decoder will solve the wrong and headless purchase of an Android radio without a verified source. This video is intended to serve as information on how to get closer to the original solution after switching to Android. Voice control will never work. Parking sensors can still be displayed on the car radio display. It always depends on the component manufacturers...
I have similar issued with my head unit. Phone control buttons doesn't work. The BOSION can bus decoder is another alternative . Is there any similarities in Can-RX / Can-TX in wiring loom?
The car radio was purchased from a friend who had a problem with the radio. I accepted it as a challenge and modified everything to be compatible with Convers +. All information is on the CZ / SK Ford forum ... www.forum.ford-club.cz/viewtopic.php?f=120&t=35271
@@SparkFree hello sir i will install this device next week. How did you enable "canbus"? Can you send me a written prescription? Thank you , dank u wel holland
@@atillademirel8257 What do you mean by canbus enable? You simply connect the canbus device to the new android radio and it will work, if not you need to check that you have enough wires on the harness to the canbus device. If not, they should be added. The seller sells you a radio for a given car model, if this is not the case, it is necessary to set the parameters for a specific car type in the service menu of the radio. That is all.
@@SparkFree hello sir, you have the same 9 inch ford smax compatible, how did you mount it, did you connect the extra cable or did you connect all the cables as they were, how did you connect the radio cable. My Ford radio has two antenna wires for me, one black and one white.
@@SparkFree Dobrý den pane, máte stejný 9palcový ford smax kompatibilní, jak jste to namontoval, připojil jste extra kabel nebo jste zapojil všechny kabely tak, jak byly, jak jste připojil kabel rádia. Moje rádio Ford má dva anténní dráty, jeden černý a jeden bílý.
Where can we get dasaita canbus, I guess it's not available anymore. do you know any place?
na convers ukazuje len frekvenciu? Povodne radia ukazovali aj nazov stanice,, u Androida to nejde? DIK
Podľa typu rádia
Číňania nemajú licencie na systém RDS... Niektorý veľký výrobca možno áno, ale pri týchto lacných hračkách tam pravdepodobne nie je nikde...
Hello. I installed a Zenec NC3811D unit in my Ford Mondeo mk4 , before restyling (year 2009) with its own canbus. I can control with steering controls, but can't see radio info on convers+. Do you believe that i can fix it with a better canbus adapter box?
Please, where (exactly which type ) did you buy it ? It is possible to buy Dasaita canbus but they do not support voice control via Convers+.
Voice control? Is this a joke? The original Bt module does not work by connecting the Android radio. This has been the reality since the beginning. Where have you been until now?
@@SparkFree
you wrote :
.. It works .... and also the voice control level for answering / canceling a call / mute...
I have canbus Hiworld but isn't work it there, so I want try your ....
The function of the voice control lever is to mute and call up the phone book of the phone connected to the radio. I do not give a link to the seller. For one thing, it doesn't work after a few months, and for one thing, people don't read correctly and with understanding... For support, contact the seller and ask him the questions you are interested in. Not always the can bus decoder will solve the wrong and headless purchase of an Android radio without a verified source. This video is intended to serve as information on how to get closer to the original solution after switching to Android. Voice control will never work. Parking sensors can still be displayed on the car radio display. It always depends on the component manufacturers...
@@SparkFree
ok, thank you
I have similar issued with my head unit. Phone control buttons doesn't work. The BOSION can bus decoder is another alternative . Is there any similarities in Can-RX / Can-TX in wiring loom?
@Spark, great work! That radio is Isudar? Can you explain how did you the integration with convers+?
The car radio was purchased from a friend who had a problem with the radio.
I accepted it as a challenge and modified everything to be compatible with Convers +.
All information is on the CZ / SK Ford forum ...
www.forum.ford-club.cz/viewtopic.php?f=120&t=35271
@@SparkFree hello sir i will install this device next week. How did you enable "canbus"? Can you send me a written prescription?
Thank you , dank u wel holland
@@atillademirel8257 What do you mean by canbus enable? You simply connect the canbus device to the new android radio and it will work, if not you need to check that you have enough wires on the harness to the canbus device. If not, they should be added. The seller sells you a radio for a given car model, if this is not the case, it is necessary to set the parameters for a specific car type in the service menu of the radio. That is all.
@@SparkFree hello sir, you have the same 9 inch ford smax compatible, how did you mount it, did you connect the extra cable or did you connect all the cables as they were, how did you connect the radio cable. My Ford radio has two antenna wires for me, one black and one white.
@@SparkFree Dobrý den pane, máte stejný 9palcový ford smax kompatibilní, jak jste to namontoval, připojil jste extra kabel nebo jste zapojil všechny kabely tak, jak byly, jak jste připojil kabel rádia. Moje rádio Ford má dva anténní dráty, jeden černý a jeden bílý.