Love your videos and your honesty. Also, your videos are crystal clear and easy to watch. Thanks for all the clarifications and now I know what radiator/electric fans I'm getting. Also, can you give me any recommendations on headers that will fit the 6.0 LS2 motor going into a 88 MC. Videos say they will fit with some modifications and at least getting started in the right direction would be helpful. Tnanks
I running the darale fans on my Gbody and the problem I came across was the gear box.I had to tap it in but it’s a snug fix but they work way better that the eBay fan. Appreciate you for the info 🫡🫡💪🏾
Yessir!! My other fans were cool..they were the same brand but these are more powerful…them eBay fans def ain’t it…the radiators cool tho..thanks for watching👌🏾
Good info quick question so I just ordered the 12” fans off Amazon $350 I’m gonna have change out my existing radiator combo what would be a good price saver radiator to get I’m running 383 stroker about 450 hp also vintage air I wanna try and catch while I’m still in the tuning stage
Thanks for watching…this is the radiator my friend has and it works great www.ebay.com/itm/254898282282?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=XE9hkNsUR3W&sssrc=4429486&ssuid=SVqAzq-iSTm&var=&widget_ver=artemis&media=COPY
I installed the 16842 on my cutlass with a griffin 3 core. Issue I have is the lower radiator neck isn’t straight but curved and the shroud won’t sit down flush
@@87SSBOI Well it’s in there snug but I’m trying to figure out the wiring to my sniper. I ran mine with relays and circuit breakers. I also have a switch that I can manually turn one fan on and off but like I said I’m trying to figure out how to wire then to my sniper. I need to hit you up and figure out how you did your fuel system for the efi. I tried to find a video you posted but I’m not sure if you posted anything on your fuel system.
@@lamarcusburston8052 easy to setup fans to the sniper...find the output wire for the fans and run the ground trigger to each one (fan 1 and fan 2)...I can't remember the colors of the wires but it's in the sniper manual...and for the fuel pump...just gotta ground it and run the power to IGN and thru a relay...I just did everything by the manual... definitely open for questions or whatever...hmu on IG @87_ss_boi
The same thing happened to me with the fuses bro. What size gauge wire did you run straight from the battery to your distribution block? 10 gauge or 8?
I can’t remember but it’s the same size that the fans come with…it’s all good now…I just removed the fuses cause most people I talked to said they don’t run a fuse and have been running these fans for years…I did find out if you want to run inline fuses u have to run 1 for each fan in order for them not to pop
@@87SSBOI ok I will try that. I am running a in-line fuse for each fan and they still pop. I had a scare earlier when I was driving and seen the temp rising up to 200 luckily I had a box of fuses in the console. Hope this fixes the issue. I’ll probably get that Msd relay you was talking about this winter. Appreciate it 💪🏾
@@84SS931hey bro the MSD relay is on sale!! They come in red and black.. MSD 75643-HC: High-Current Solid State Relay 35Ax4, Blk , Black a.co/d/emAQWp4 MSD 7564-HC: High-Current Solid State Relay 35Ax4, Red a.co/d/1qUCyEm
I hit the notifications button ...let's get this channel rollin.
Let’s GOOO 🫡🫡🫡
I watch your videos for sure. Tons of good G body info, you are for sure a valuable professor at UA-cam University.
I appreciate you 🫡
SPAL has a set of radiator brackets which eliminate the zip ties and mount your fans.
Thanks bro…I need that!!!
@@87SSBOI I know. The Mistress is much too nice to have zip ties.
@@t.l.robinson2162 😂😂💯
Love your videos and your honesty. Also, your videos are crystal clear and easy to watch. Thanks for all the clarifications and now I know what radiator/electric fans I'm getting. Also, can you give me any recommendations on headers that will fit the 6.0 LS2 motor going into a 88 MC. Videos say they will fit with some modifications and at least getting started in the right direction would be helpful. Tnanks
I appreciate you 🫡🫡
Best headers for you will be Doug Thorley or Speed Engineering
@@87SSBOI thanks
I went with the Dewitt’s shroud and spal brushless 16 inch single fan fits perfect.
Nice!!
💪🏾💪🏾💪🏾
Delta pag and the flex a lite 295 imo are the best fans on the market! They also draw less amps than derale
I running the darale fans on my Gbody and the problem I came across was the gear box.I had to tap it in but it’s a snug fix but they work way better that the eBay fan. Appreciate you for the info 🫡🫡💪🏾
Yessir!! My other fans were cool..they were the same brand but these are more powerful…them eBay fans def ain’t it…the radiators cool tho..thanks for watching👌🏾
Good info quick question so I just ordered the 12” fans off Amazon $350 I’m gonna have change out my existing radiator combo what would be a good price saver radiator to get I’m running 383 stroker about 450 hp also vintage air I wanna try and catch while I’m still in the tuning stage
Thanks for watching…this is the radiator my friend has and it works great
www.ebay.com/itm/254898282282?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=XE9hkNsUR3W&sssrc=4429486&ssuid=SVqAzq-iSTm&var=&widget_ver=artemis&media=COPY
Good info homie🫡
💯
Good information thanks bro
🫡
💯🏅🏆
Yessuh🫡
Yea Buddy 🎬💯💪🏾🎯🫡
I installed the 16842 on my cutlass with a griffin 3 core. Issue I have is the lower radiator neck isn’t straight but curved and the shroud won’t sit down flush
Always something 😒
Gotta modify it somehow and make it work if u really wanna use it
@@87SSBOI Well it’s in there snug but I’m trying to figure out the wiring to my sniper. I ran mine with relays and circuit breakers. I also have a switch that I can manually turn one fan on and off but like I said I’m trying to figure out how to wire then to my sniper. I need to hit you up and figure out how you did your fuel system for the efi. I tried to find a video you posted but I’m not sure if you posted anything on your fuel system.
@@lamarcusburston8052 nah I didn't start UA-cam til after EFI and Dakota Digital Installs
@@lamarcusburston8052 easy to setup fans to the sniper...find the output wire for the fans and run the ground trigger to each one (fan 1 and fan 2)...I can't remember the colors of the wires but it's in the sniper manual...and for the fuel pump...just gotta ground it and run the power to IGN and thru a relay...I just did everything by the manual... definitely open for questions or whatever...hmu on IG @87_ss_boi
Great Video my Boi!
🫡🫡🫡
The same thing happened to me with the fuses bro. What size gauge wire did you run straight from the battery to your distribution block? 10 gauge or 8?
I can’t remember but it’s the same size that the fans come with…it’s all good now…I just removed the fuses cause most people I talked to said they don’t run a fuse and have been running these fans for years…I did find out if you want to run inline fuses u have to run 1 for each fan in order for them not to pop
@@87SSBOI ok I will try that. I am running a in-line fuse for each fan and they still pop. I had a scare earlier when I was driving and seen the temp rising up to 200 luckily I had a box of fuses in the console. Hope this fixes the issue. I’ll probably get that Msd relay you was talking about this winter. Appreciate it 💪🏾
@@84SS931 that was the next thing I was gonna tell u…get that MSD relay box…make sure u get the 35Ax4 tho…7564-HC
@@87SSBOI ok bet thanks for the info
@@84SS931hey bro the MSD relay is on sale!! They come in red and black..
MSD 75643-HC: High-Current Solid State Relay 35Ax4, Blk , Black a.co/d/emAQWp4
MSD 7564-HC: High-Current Solid State Relay 35Ax4, Red a.co/d/1qUCyEm
What temp sensor you use ?
I have 2...the one that came with the Holley Sniper and the the one came with the Dakota Digital
I would think that 13 inch is better. I think that gap is good for some reason. vibes
Lol…nah they the exact same thing…just bigger in size…the 12 and 13 are 2000cfm
@@87SSBOII’m not a car person lol they always say bigger is better lol 😂.
@@shuntubbs2682 yea that what they "say"😂