Just wanted to let you know (I'm an old electronic hobbyist and amateur radio operator) that the grease that you used IS absolutely the right stuff for that kind of contact issue. Any and everytime that two (or more) wires are brought together (like in a crimp/pressure type commector) in any vehicle that may be subjected to water, moisture, or humidity like would be found in cars, trucks, motorcycles, boats, trailers, & etc., this stuff will save you much grief later on down the road! When you clean off those battery terminals, put a thin coating of that grease before tightening down the bolts and you'll see either no or much less corrosion in the future. This is especially critical on crimp-on connectors!!! Another great video, BTW. Keep up the good work!!! :^)
I bought the sane steering wheel for my maverick. Those original ford steering wheels are worth a pretty penny . There are companies out there that restore them too.
Hey Griff ? just an FYI buying new skin for your bench seat and putting it on is easier than you think , either do it in warm bright sun light or have a heat gun.hair dryer handy ..wheel looks cool !
Thanks for the video. I bought pretty much the same wheel for a very similar application: mid '60's Ford Thunderbird. Mine looks like a slightly different setup and kit than you have for yours. Your horn only had one wire, and mine had two. They sent me an extra piece in the kit, so I guess it was because of this. Question though: Did they send you the roll pins to use for turn signal cancellation? I noticed you didn't install them even though you have the same Ford turn signal cancellation mechanism that I have in my T-Bird (the flexible plastic piece that the turn signal lever connects to.) I tried to use the original factory turn signal cancellation piece that activates this mechanism (I saw you had a similar piece on your original steering wheel) but the clearances weren't right to use it with the kit. I had to use the roll pins with the kit for activating the mechanism. My turn signals are now cancelling with the pins supplied, but I wanted to see if you had the same kind of experience I did (wanted to make sure I installed them right.) Your steering wheel looks great. I'm pretty sure mine is made by the same company. They do a good job, though I wish the instructions were a little better.
If I remember right, I had to manually turn the turn signals off when making a turn in this truck. So that must have been because of the way I installed my wheel. Thanks for watching!
It’s 15” I bought the exact same one on eBay a few weeks ago and it looks beautiful in person I found this video and noticed it’s exactly like the one I bought so this video was extra helpful since it’s the same steering wheel
It would been nice if he would hzve showed the direction of nut on stealing week comes off so many people think the nut is reversed thread h as be Sean them beat all to peace’s from ppl trying to remove. The nut
Just wanted to let you know (I'm an old electronic hobbyist and amateur radio operator) that the grease that you used IS absolutely the right stuff for that kind of contact issue. Any and everytime that two (or more) wires are brought together (like in a crimp/pressure type commector) in any vehicle that may be subjected to water, moisture, or humidity like would be found in cars, trucks, motorcycles, boats, trailers, & etc., this stuff will save you much grief later on down the road! When you clean off those battery terminals, put a thin coating of that grease before tightening down the bolts and you'll see either no or much less corrosion in the future. This is especially critical on crimp-on connectors!!! Another great video, BTW. Keep up the good work!!! :^)
I bought the sane steering wheel for my maverick. Those original ford steering wheels are worth a pretty penny . There are companies out there that restore them too.
That wheel looks great! Nice job 👍
Great looking steering wheel..
Thanks for the info! Love the truck too!
Thanks!
Thanks. I’m about to this exact install on my 80s ford truck.
Nice Steering Wheel.
Got same love now to make horn work
Hey Griff ? just an FYI buying new skin for your bench seat and putting it on is easier than you think , either do it in warm bright sun light or have a heat gun.hair dryer handy ..wheel looks cool !
Thanks Griff Parker. Your setup looked great. Did you have any issues with the new wheel canceling the turn signals after your turns?
Can you put a link in description for that steering wheel and ford emblem. I don’t see that model on their website.
I have a 73 F250 that I bought with a steering wheel just like this on it! It looks older though. Do you have any idea what it might have come off of?
So is the horn wire getting tugged on everytime you turn the steering wheel?
Did you need a adapter for this steering wheel or not?
What size steering wheel is that a 14inch or 15inch wheel
Thanks for the video. I bought pretty much the same wheel for a very similar application: mid '60's Ford Thunderbird. Mine looks like a slightly different setup and kit than you have for yours. Your horn only had one wire, and mine had two. They sent me an extra piece in the kit, so I guess it was because of this.
Question though: Did they send you the roll pins to use for turn signal cancellation? I noticed you didn't install them even though you have the same Ford turn signal cancellation mechanism that I have in my T-Bird (the flexible plastic piece that the turn signal lever connects to.) I tried to use the original factory turn signal cancellation piece that activates this mechanism (I saw you had a similar piece on your original steering wheel) but the clearances weren't right to use it with the kit. I had to use the roll pins with the kit for activating the mechanism. My turn signals are now cancelling with the pins supplied, but I wanted to see if you had the same kind of experience I did (wanted to make sure I installed them right.)
Your steering wheel looks great. I'm pretty sure mine is made by the same company. They do a good job, though I wish the instructions were a little better.
If I remember right, I had to manually turn the turn signals off when making a turn in this truck. So that must have been because of the way I installed my wheel. Thanks for watching!
Instablaster
Where can I get this?
Como conseguir todo el equipo completo?
Don't need puller just wiggle it and it will come off
Did you have a problem with a gap in between your steering wheel and your steering column
I didn't notice an issue like that. I was pretty impressed with the fit and finish. Thanks for watching!
Howe about the turn signal auto switch?
Homeboy don’t install the original cam or the roll pin
what size is the steering wheel?
It’s 15” I bought the exact same one on eBay a few weeks ago and it looks beautiful in person I found this video and noticed it’s exactly like the one I bought so this video was extra helpful since it’s the same steering wheel
75-77 Bronco 70-77 F100 F150 F250 F350 Wood Steering Wheel High Gloss Grip 15" Just copy and paste that and it’ll pop up
Torque nut to 100 foot lbs.
It would been nice if he would hzve showed the direction of nut on stealing week comes off so many people think the nut is reversed thread h as be Sean them beat all to peace’s from ppl trying to remove. The nut
Did your self cancel blinkers work
no sir
you did not show part of installation
Where can I buy this exact setup?
I got mine off eBay but that was a while ago
I'm confused as fuck at 6:00
That was a painful 9 minutes to watch. The three stooges could make a better learning video than this one
Stfu