Building setting out | Cheap material
Вставка
- Опубліковано 26 чер 2024
- All you need to know to do a setting out of any building using cheap and affordable material. Talks about the builder's square setting out technique and how to go about calculating needed material for the process - wooden profiles and wooden pegs. Also a list of all the needed material for a pocket friendly setting out is shown, giving a peek into all the necessities of the process.
#settingout #house #foundation #building #cheap #affordable #diy #housedesign #ofwhouse #construction #survey #builderssquare #set-out #buildingconstruction
Part 2: • How to set out a build... - Навчання та стиль
Thanks
Extremely useful to me personally …Thanks man
Glad to hear it!
This is wonderfully broken down bro. Nice one sir
Thank you for watching!
Here's part 2: ua-cam.com/video/aEMMAT5E_Ow/v-deo.html
Well analysed and comprehensive.
Thank you for watching!
Here's part 2: ua-cam.com/video/aEMMAT5E_Ow/v-deo.html
Just found your videos. I need you and will definitely use an experienced person with the guidance of the videos. Some of our houses in SA are falling apart. I won't afford an architect neither an engineer. Wish to reach out to you when we start our project
Thank you for watching!
I will be looking forward to that!
Great 👍...I love to have d part 2,,,d setting out proper.. thanks
Here is part 2: ua-cam.com/video/aEMMAT5E_Ow/v-deo.html
Thank you for watching!
Good video. Keep up the good work
Thank you for watching!
Here is part 2: ua-cam.com/video/aEMMAT5E_Ow/v-deo.html
Part 2: ua-cam.com/video/aEMMAT5E_Ow/v-deo.html
Can you please help me. I cannot afford an engineer. And because we can't afford, our houses are falling apart. I can pay you
please part 2
Thank you for watching!
Here's part 2: ua-cam.com/video/aEMMAT5E_Ow/v-deo.html
Thanks for sharing and I want to know if the average length of a profiles you state 2.7m is it constant to use for any profile calculations?
Thank you for watching!
The average profile length is NOT constant.
@@cluelessjunkie okay I should use the same procedure to have it right? Thanks for responding
I still don't get it sir and I really want to wrap my head on it, help me out on this average profile length please.
A profile length is whatever length the 2x2 wood was cut into.
You could even specify the length you want at a sawmill.
Most likely, you would acquire the wood after they have been cut - take the individual lengths of the wood, then get the average; this average becomes your AVERAGE PROFILE LENGTH
@@cluelessjunkie ok now I got it and thank you.
Please what's the difference between the profile and pegs?
Pegs go into the ground, profiles go ontop the pegs
Thank you for watching!
Here's part 2: ua-cam.com/video/aEMMAT5E_Ow/v-deo.html