Це відео не доступне.
Перепрошуємо.
LOW COST Arbitrary Function/Waveform Signal Generator
Вставка
- Опубліковано 24 бер 2016
- No need to spend a lot of money on an Arbitrary Waveform Function/Signal Generator/Frequency Counter! The one shown in this video works great, receives high ratings, and is HIGHLY affordable for electronics hobbyists and students. The link below is where I got my unit from.
Link to my other video showing a very good PSU & ESR/Component tester at LOW COST:
• (2) Very Good/Low Pric...
The signal generator in this video: bit.ly/2COYxGb
Many other Signal Generators: bit.ly/2B5OvR7
Velleman scope in video: amzn.to/32Zsiit
(Amazon Affiliate Link)
**The 100MHZ replacement scope probe I used in the video which works very well can be found at the link below.
The scope probe: bit.ly/1XGday5
*Try these money saving coupon codes: affiliate6 or aff7off or f8aaf1 or 781622 or 5719ed or elec* or ask if other codes are available!
LINK TO FULL SPECS:
tinypic.com/m/k...
Thanks For Watching!
Support the creation of more electronicsNmore videos:
www.patreon.co...
**If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a "THUMBS UP", and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)**
Excellent training video, and excellent videography! I bought one of these for $48, free shipping. One of the features in the manual is the "Follow" function, where, when set, configures channel 2 simultaneously with channel 1.
Rick Bailey Glad you enjoyed the video!
Very good review on this product, yours was the only one I watched that clearly showed how to actually use the panel controls properly. Good job, thank you. Thumbs Up!!!
Thanks Dave! Be sure to check out my "Product Review" video playlist, rate thumbs up, and share with others. If you decide to make a purchase, be sure to use one of the money saving coupon codes that I provide. :-)
Thank you so much for this very informative video I bought one of these and could not run
it until I saw you great video.Wish you could do a segment of the Arbitrary function capability.
This is a very economical and practice instrument. I like it. Very nice presentation.
+Joseph Nicholas
Thanks Joseph! Please be sure to share with others.
Aside from being a great product for the price. You basically just made a video manual for the thing. I love purchasing something and being able to use it right out of the box. That's what you just provided. Thanks. As always, excellent videos and quality explanations. Thank you kindly for sharing.
+Francis Rodgers
Thanks for watching!
Since I bought two of these, I will check them for frequency accuracy and for limits on settings. Without this video, I would have missed some of the functions provided. Excellent job! Thank you! de KQ2E
Glad you liked the video Bruce!
There is so much room inside the compartment I think you can place a battery inside to make it portable :)
+tose22 tose22
I thought the same also. :-) The width could not really be made smaller, but the length could have been 3" shorter. The only problem is, you would not be able to tilt the unit upwards and have good stability.
You would need 3 batteries because the source inside (SMPS) gives 3 voltages...
I wonder if it helps reduce the noise from a switching power supply? Then again if that was the reason I guess you'd expect that to be right at the back as far as possible from the circuits at the front...
Just ordered mine with discount code, looks a nice bit of kit and will make a great addition for power amp repair and testing.
Big Thumbs Up.
+Mike James
Thanks for watching, and thanks for your support!
***** If you're going to make a purchase, I'll look for another code for you.
*****
OK. I just updated the coupon code to save $5.12 off the price shown, Refer to the link in the video description area!
Thanks for the detailed video. FYI - I purchased one using your link and tried both your coupon codes but they don't work for USA customers. This tool is a great value. I was looking at the exact same one but under the "Kuman" brand on Amazon and it was over 20% more expensive.
Hi Robert. The coupon code elec works.....or affiliate6. Thanks for your support!
electronicsNmore those are not the codes you list on the video. The ones listed are MEAS77 and EMRLSP
Robert Lopez
Hey Robert. There were (3) codes shown. I added affiliate6 to the list after you said none worked. The first 2 didn't work, but the elec did.
can this be used for pulsed dc to experiment with coils and PEMF or is it purely an audio generator? Still new trying to get my head around all of this stuff.
Great review, just ordered one. Can't wait to play with my new toy! Thanks for the coupon!
+Terrence Zimmermann (RobotDude)
Thanks for watching and thanks for your support!
Hi, Thanks for the coupon, I just purchased one. Good job on video, thanks for the tip. You got a great channel here. Good on ya!
+Mike Poirier
You're welcome mike. Please share my channel with others. Thanks!
excellent, thanks for taking the time to explain the features. FeelTech should give you a commission!
You're welcome. I get a SMALL cut if a viewer purchases the unit using the link provided in the video description area. It helps to support my channel. Unfortunately, I'm not "fairly" compensated for all the time/effort I put into making these videos. Be sure to share with others, and rate thumbs up. Thanks For Watching!
HOW ABOUT THE VOLTAGE ON THE GROUND CONTACT OF BNC JACKS? There are lots of comments on that matter, most of them saying that the said voltage is rather dangerous for the sensitive circuits where the signal might be applied...
Great video! One of the best for explaining this unit! Saved for in favorites
Thanks Gerald! Be sure to check out my video playlists, especially my "Product Review" video playlist, rate thumbs up, and share.
How is the floating voltage and current on the BNC connectors?
Hi there. I packed up my equipment a month ago. I'm in the process of moving. Have you clicked on the "specs" link in the video description area? Thanks for watching!
Good functionality explanation, thank. But device itself has poor sine at lowest freq, requiered for audio testing. That why 10KHz and higher freq. was used in presentation.
I wouldn't say poor, but you also cannot expect perfection from a low priced unit like this. It has its uses. Thanks for watching
Very tempting to say the least. Would have been nice to see close-ups of the internals. Wonder how hackable it is.
Given the amount of room I might just stick a battery in there and hack in a portable bench power supply. 2-in-1 instrument!
+Spag The Maker
Battery idea sounds good.
Nice job showing off the features of the unit, I gave you a thumbs up, If is definitely built down to a price point, it seems very toy like... 100ns edges is very slow and almost useless. Is their anyway you can give that a true evaluation? What is phase noise, max current, min count and resolution, frequency stability (open air crystal flapping in the airseems problematic) etc.... any how good job.
+Michael Katt
I'll post a link to all the specs in the video description area. For the hobbyist/student, the unit is perfect. The frequency was moving around during the crystal testing because power was applied to the crystal with the ground lead hanging off. Connecting the wire to the input with nothing connected to the clips on the frequency measurement setting will result in no reading.
+Michael Katt
I posted a link to all the specs of the unit in the video description area.
A nice tutorial would be on how to amplify the power of a cheap signal generator.
Will it drive a speaker to produce sounds?
It sure can. Very cool sounds. :-)
Great review has always. Sorry for my lack of comments on your last few video's I has always have Liked,Shared and added to my playlist. Thank you for all the very useful videos. I enjoyed the one about the lemon :) Hard to believe how many people fell for that guys fake video. I checked out his video LMAO.
All my best.
Bobby
+Bobby Tectalabyss
Hey Bobby. You're welcome. Amazing, 7-8 million people watched that fake video. He made thousands scamming people. Disgraceful.
+electronicsNmore Yeah it sucks to see crap like that get so many views and a person like you trying to do the best honest videos you can. I hope you have something cooked up for April 1st ;) Hint hint.
All my best.
Bobby
Hi, I'm new in this topic. I've purchase FY2200S but I don't undestand how works the software. I can't see any waveform formed on the software screen. What I'm doing wrong?. I'm using CH1 in MF mode.
Would anyone know where I can get a power supply module for this device, mine crapped out recently. I’m not having any luck finding where to buy one. Thanks.
No idea where. Maybe look for a similar output well filtered power supply online.
Dear its nice teat equipment. I have a small question: can this instrument create output square output example 10,000 pulses and stop output.
I want to connect ch1 ch2 to flow computer chanel .i.e. i will be using this function generator as turbine meter, ofcourse for simmulation only.
If yes how i can do that, If not pls suggets the product.
Thank you.
Hello, the product link in the video description area has a "Burst" mode. Refer to the link posted to learn more. Thanks!
im tryin to decide to get this scope or the tpi 440...any ideas? for electronics equipment servicing
Thanks for the video. Just a thought, could MF be main frequency, and SF be secondary frequency?
+Gadget Review (GRV)
Yes, that is what it means.
Thanks for presentation! I'll need to find one with higher freq of about 60MHz, also cheaper.
+crnazvijezda
Glad you enjoyed the video. If you need higher, it will not be cheaper.
+crnazvijezda Currently Feeltech technology has successfully developed a 60Mhz of DDS products will soon be sold.
Great review, thank you for sharing!
+saturn5tony You're welcome.
what's lowest and highest amplitude >
I would love to see a repair video where a signal generator is put to good use. Anyway, thx for your videos.
+Futschikatores
l will do that in the future! :-) Thanks For Watching!
+Futschikatores If these is a video on this, which I doubt, it probably could be found in audio or stereo equipment repair.
Do you have a tutorial on using the software for the feeltech products? Finding the documentation a little scarce. Or any other resources would be great.
No, I don't have a tutorial for using their software. Thanks for watching!
Just ordered with coupon code. Thans forum the upload.
+fredcom1
You're welcome, and thanks for your support.
Frequency measurement crystal displays zero on my feeltech.I I see in your movie (12:15) that there are 4 wires connected.My test lead has only 2. Can you explain how i connect it ? Can the crystal be measured directly or is there required a circuit between ? (Sorry for bad english, google translate).
fredcom1
I'm using a "Crystal Oscillator". They require a power supply in order to generate a frequency. In order to test a (2) pin crystal, you would need to test the crystal "in circuit". Thank You
+electronicsNmore thank you for explaining. I try built a test circuit on a breathboard.
Hello can you tell me if I can change a 12 volt Battery? Please let me know
You can use this:
bit.ly/2t9NPr6
great video. where can i find the AM/FM waves on the generaor? rhanks.
Hi there. I mentioned in the video which button to press in order to change the type of waveform. I'm in the process of moving, so the unit is packed up. Thanks for watching!
i have a fy2200sp and i am trying to upload an arbitrary waveform on it but lost the cd , could someone help me out ? the software on the feeltech is driver only , please help , Adrian
files.banggood.com/2016/06/SKU292321%20CD.zip
hi friend if i used the FY3224S i must used the oscilloscope to see the wave going back and front? what was the setting you made that do that?? i got one
Please refer to my video.
what do you used to amplifier the freq?
can I drive small dc stepper motors? For example IAC (idle air control valve) solenoid.
As long as the DC motor doesn't require a lot of current, I don't see why not. Thanks for watching!
Just drive it over a transistor
Hi, what oscilloscope did you use in video?
Look in the video description area for the link. Thank you!
thanks for this ...
I just bought one of these branded MOHOO, will it be basically the same thing? It looks identical
Can't say if you didn't buy it from the link I provided.
Just for info, I got mine from amazon. It turned up, and its actually a FeelTech FY2200SP. I saw a forum post that says its possible to unlock the higher frequencies with a key press combination. Any thoughts on this?
Hi electronicsNmore, am in Ghana will be possible for me to order this product....
+D. ELIMANI
Try ordering at the website and see if the order is approved.
I saw u used a diff probe that came with the scope...any reason y?
Old one broke.
24:26 "Where's the beef?" (Ask your parents about that quote; it was a social meme before we were calling these things memes.) There's bugger all in these DDS function generators. I can't even why they put it in such a large enclosure unless they thought that was a form factor that the market expects a function generator to come in. It could easily have been shortened to sit flush abreast a typical DSO; I think most electronics engineers would appreciate the savings in workbench real estate.
Yes, they could've made it much smaller, I agree. Thanks for watching!
hey can you do a review on the scope?
Unfortunately I have a lot of my equipment packed up for a move.
Can I use this to test or set up stepper motors and drives?
Should be able to. If the power output isn't high enough, then you can always power the base of a transistor to control a high current load.
electronicsNmore Ok, so 1 channel can be used for step and the other for direction pulses? Just making sure thanks
whats the purpose of a square wave ....?
Raj Dann it’s used to control loads like motors with pulse-width modulation
I have just fucking ordered one !
+Alex P
:-) Thanks for watching, and thanks for your support!
Anyone knows if I can get a relative to frequency voltage out of this thing?
I have no idea what you mean. Please explain much better.
electronicsNmore I mean a DC voltage value that corresponds to a feequency value so I can make an analogue voltometer show frequency.
+Thanasis Athanasi This unit will not do that.
electronicsNmore
Thanks for your reply friend...
You do need to be careful with these as the internal switching power supply tends to leak line voltage to the output.
Never had any problems. :-)
electronicsNmore mine was very low (I have since put in a linear supply) but I remember seeing someone else whos was putting out a mA at 240v.
Likely had faulty unit. I use mine all the time and handle the connections with my bare hands. Never any issues.
can this scope check voltages over 100v
Yes, I switch the probe setting to x10.
Raj Dann, this is not a scope, it is a signal generator. Seems you are a beginner in this field...
how do I use this in electronics servicing?
You can inject signals into a circuit to make sure other parts of the circuit are working properly.
whats the purpose of a square wave ??
جميل
Annoying,but thanks for the discount.
+Craig Rotay
Annoying? Explain.
oh great im viewer 666. is it true. no it caNT BE. nnnnnNNNNNNNOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOoooooooooooooooooo.........oooooooooooo.......o.o.o.o.o.o. hahahaha
+leadfoot lawnmower
I went to the store a few days ago and paid $6.66 for 2 items. :-) Only a #.
lol. yeah im just havin a bit of fun. haha
90% frivolous commentary. I couldn't muster the patience for him to GET TO THE POINT.
ADD / ADHD is a horrible thing, treatment options are available.
But he does have a point there, ADHD or no ADHD!