Good Decision 👍 Its cost effective with number of flexible licensing options.Please watch this video to know more : ua-cam.com/video/6MVFyF47EYo/v-deo.html
Great explanation Thanks. but you didn't cover parametrically scaling the doors which is more important than doors states-its always needed! Flip and scale mostly useful, door state is a bonus. I have been using Autocad for 20 years and never bothered to spend the time to learn about dynamic blocks! Also never heard of bricks CAD before, is it new?
Hello, thank you for this video. I have been working with AutoCAD dynamic blocks for many years and I love wat you can do with it. As a company we are recently looking into switching from AutoCAD to BricsCAD and your video realy helped me understand how parametric blocks function. I have just started trying to replicate my faforite functions and it looks more userfriendly, I think however that a few comments should be made: - Your construction of the AutoCAD dynamic block is overly complicated. It would work as well with just one "wall", one alignment parameter that would tipicaly folow the wall and the 3 door states. - Can the automatic trimming be turned off? I don't like those holes in my wall and if I remove a door later i have to fix those holes. - In the BricsCAD Lite version the trimming and stretching to wall thickness don't work - I had a FATAL ERROR on trying to recreate your block, because I used U shaped polylines for the 'wall" reference curves. Applying "Parametrize" will cause a fatal error (same hapens with a rectangle ofcourse) But it took me a while to figure out what I did wrong. - In AutoCAD a dynamic block wil resnap to alignment when moved to another place, which parametric blocks don't - I have noticed that dynamic blocks can be used and manipulated in BricsCAD but not edited and I have not found the convertor yet (V23 Beta?) - Parametric blocks lose all functionality in Autocad and become just plain Blocks. - I don't like that the parameters are only accessible through the properties palet. I hope it is clear wat mean.
I believe parametric is the best one, because all drawings should be driving from dimensions. Can we make parametric design in autocad with vlookup option? Because some times dimensions not driving from relation that can be lookup with respect another?
@@sabeercad Thanks for the feedback Can we link the dimension values with respect to 2d drawing Cross section dimension to excel sheet ? If yes could you pls make one video on it to save our time? Like in soildworks.
The flipline command only allow flip all entities, I think it should allow choose which entities we want to flip. I have a problem especially with text
Thanks, I still hadn't decided which one to buy but now, I'm going to buy BricsCAD.
Good Decision 👍 Its cost effective with number of flexible licensing options.Please watch this video to know more : ua-cam.com/video/6MVFyF47EYo/v-deo.html
You have Exactly explained what I was looking for ! Thank you !
Glad that you liked 👍🏻😊
thank you ! hope to see more complicated things like fences , but the video is awesome
Thank you ❤️
Professional trainer sir thank full
Thank you ! Please post your feedbacks related with the Blocks, which is more simple and easy to create.
Very interesting! THANKS
Sir ur explain ❤️❤️❤️
Thank you ❤️
Thanks for the video, need more parametric blocks?
You can expect more videos
thank you for the video sir
Awesome video! I have tried, but with the flip and stretch, often my door became weird one...
Thank you!
Great explanation Thanks. but you didn't cover parametrically scaling the doors which is more important than doors states-its always needed! Flip and scale mostly useful, door state is a bonus. I have been using Autocad for 20 years and never bothered to spend the time to learn about dynamic blocks! Also never heard of bricks CAD before, is it new?
Hello, thank you for this video.
I have been working with AutoCAD dynamic blocks for many years and I love wat you can do with it.
As a company we are recently looking into switching from AutoCAD to BricsCAD and your video realy helped me understand how parametric blocks function.
I have just started trying to replicate my faforite functions and it looks more userfriendly, I think however that a few comments should be made:
- Your construction of the AutoCAD dynamic block is overly complicated. It would work as well with just one "wall", one alignment parameter that would tipicaly folow the wall and the 3 door states.
- Can the automatic trimming be turned off? I don't like those holes in my wall and if I remove a door later i have to fix those holes.
- In the BricsCAD Lite version the trimming and stretching to wall thickness don't work
- I had a FATAL ERROR on trying to recreate your block, because I used U shaped polylines for the 'wall" reference curves. Applying "Parametrize" will cause a fatal error (same hapens with a rectangle ofcourse) But it took me a while to figure out what I did wrong.
- In AutoCAD a dynamic block wil resnap to alignment when moved to another place, which parametric blocks don't
- I have noticed that dynamic blocks can be used and manipulated in BricsCAD but not edited and I have not found the convertor yet (V23 Beta?)
- Parametric blocks lose all functionality in Autocad and become just plain Blocks.
- I don't like that the parameters are only accessible through the properties palet.
I hope it is clear wat mean.
Thank you so much
Thank you for align
You are welcome
Sir, when applying material to 3d dynamic block for rendering, then material not applying....please help....
SabeeCad why is it that in Autocad hatches we don't have earth embankment hatch, till date.
I believe parametric is the best one, because all drawings should be driving from dimensions.
Can we make parametric design in autocad with vlookup option?
Because some times dimensions not driving from relation that can be lookup with respect another?
Its possible in AutoCAD. It takes less time to create a parametric block.
@@sabeercad
Thanks for the feedback
Can we link the dimension values with respect to 2d drawing Cross section dimension to excel sheet ?
If yes could you pls make one video on it to save our time?
Like in soildworks.
The flipline command should leave choosing the entities to flip. Is there is text in the block the text flipping too, it's a problem
Hello Thank you from South America.
Do you Know the best Python module for AutoCAD?
The flipline command only allow flip all entities, I think it should allow choose which entities we want to flip. I have a problem especially with text