I really enjoyed your video and I am in the process of doing a well this way, and was very successful until. I had come to the point of inserting my well point and check valve. But when trying to remove the 2 inch PVC pipe, it was stuck! I have tried everything, even a tractor bucket and chain to pull it, and nothing. It will spin when twisting it, but will not come up. 🤷♂️🤷♂️ Any ideas would be appreciated.
So when people jet a well on a homestead, where do they get the water to jet the well? Serious question cuz im trying to figure out how im gunna do this
Can you tell me what State this is? I live about 6 miles from the Savannah River in Augusta and I need an irrigation well for my garden pond and my Wife's garden. I have nothing but sandy soil here with no clay or rocks.
Hi Chuck. Thank you for your helpful videos. Like your brother, I am gong to do a shallow well with m pressure washer snd the mini jetter. I have a simple question please. What is the purpose of removing the 2 inch pipe once the well point is down? Can it just be left in the ground? Thank you for your prompt answer a I am at this point in my project.
Depends on the situation. But the mud pump way is still high pressure (going from 2” to 1” pipe) and the water volume is much much more to flush out the water.
I do not think there is 2 inch submersible. If you find pls post link. I live in florida and I am trying to dug a well but freaking no water until 28 feet I do see water but my pump does not pull it every after priming. My only source is submersible but have to gig 4 inch hole
I did everything Like you did but got my 2inch about 15ft down and the pipe will not go deeper. I've spun the pipe beat it on top while the jetter is still pushing dirt out but the dang 2 inch has been very difficult to drop down . Any ideas on what to do differently?
There could be several reasons.. but I made several more videos using a powerful homemade jet. Check it out! It might answer your question and make big difference! You are watching a video of my brother using my method.. Watch the other videos on wells on the channel Here is the playlist ua-cam.com/play/PLix1VT7RNAOhblDE_17kn0K1Qqsg9aaNK.html&EJGixIgBCJiu2KjB4oSJEQ The best one is LIVE. I did it Live to show everyone how easy it is.. that video has more tips than all the rest ua-cam.com/users/AppleDrains
Pull it up and look at the tip. My teeth were gone at about 12 feet. I've modified it with a steel pipe nipple threaded to the end and used a plasma cutter to make metal teeth instead. I suspect that will fix my issues
Garden hoses are made with lead and aren’t recommended for drinking water. They do make hoses that are specifically safe for drinking. They’re usually white or neon green.
I am in west central FL and am having huge issues with the pipe getting stuck as I try to drive down. The first 15' went great with dirty water flushing out, but then it seems the water pressure is not strong enough to push the dirt/sand up and out. It "feels like" the downward progress sprays and stirs the sandy dirt up and then it settles back down sealing the pipe in place. I am using the 2" pipe with two garden hoses hooked up to it. Will the sewer jetter clear the sandy waste out better? Any help is appreciated.
Prays KING of kings+ LORD of lords? LORD JESUS CHRIST : Amen. Hallelujah!.......( Rev.19:4-22:21). Prays Holy ONE FATHER+SON+SPIRIT? HOLY ONE BIBLE 66 BOOKS+ 1189 CHAPTERS+ THE eternal promises WORDS OF CHRIST JESUS' AMEN. WORSHIPS HOLY ONE GOD!..........
Hi have you tried to sink in a 4” pipe some 50 to 60 feet deep?
I don’t comment enough, but I wanted you to know I really enjoy your videos.
How do you know when you’ve found a sufficient water supply? If you find water at 20 feet do you continue to create a reservoir?
Hi,mam i like your method and i am gone a try this when i will back to visit my country .
I tried the pole cap and sledge hammer way (galvanized 2 inch metal pipe not pvc). Thats a no go for sure. Florida.
Prob hit some limerock.
very nice video thanks for sharing, can you tell me where I can pick up a mini jetter. will the PVC work in Florida sand
i was gonna do the garden hose trick before but defenitely getting myself the drain unblocker ject for my pressure washer.
As always, thats great Chuck. Will start one in HTX when the Polar Express Departs!
Would you do this for clients? Also would this work in clay soils?
I really enjoyed your video and I am in the process of doing a well this way, and was very successful until.
I had come to the point of inserting my well point and check valve. But when trying to remove the 2 inch PVC pipe, it was stuck! I have tried everything, even a tractor bucket and chain to pull it, and nothing. It will spin when twisting it, but will not come up. 🤷♂️🤷♂️
Any ideas would be appreciated.
Good stuff man, thanks for sharing
Good 👍
I thought your channel said "ample brains" st first glance. 😊🤪
would you pour pea gravel down around the outside of the 1" finished well
Do you have any tips on pounding or jetting into clay and rock?
Where do you get a jet pump like this
So when people jet a well on a homestead, where do they get the water to jet the well? Serious question cuz im trying to figure out how im gunna do this
Can you tell me what State this is?
I live about 6 miles from the Savannah River in Augusta and I need an irrigation well for my garden pond and my Wife's garden. I have nothing but sandy soil here with no clay or rocks.
Where u putting your well point?
Do you use this method any more?
"Best enema I've ever had."
Hi Chuck. Thank you for your helpful videos. Like your brother, I am gong to do a shallow well with m pressure washer snd the mini jetter. I have a simple question please. What is the purpose of removing the 2 inch pipe once the well point is down? Can it just be left in the ground? Thank you for your prompt answer a I am at this point in my project.
Outer is casing and inner is suction with well point check valve.
What is the best way to drill? Mud pump, or Jet high pressure...?
Depends on the situation. But the mud pump way is still high pressure (going from 2” to 1” pipe) and the water volume is much much more to flush out the water.
I'm in Florida can you do a 3in to put a 2 in submersible down about 50 or 80 feet
Have you tried this?
I do not think there is 2 inch submersible. If you find pls post link. I live in florida and I am trying to dug a well but freaking no water until 28 feet
I do see water but my pump does not pull it every after priming. My only source is submersible but have to gig 4 inch hole
Too funny. I just watched his video and then moved to this one having no clue you guys were related.
I'm in 🇸🇷 Suriname bro
Where do you get the mini jet tip ? Thanks for these videos.
I can’t find the jet in Ghana to buy,please how can you help me to get one to buy
Where do you buy the mini jeter?
I'd like to know to please
Look on amazon for sewer jetter kit
So where would I get the hose fittings?
Where do you buy the mini jet?
I did everything Like you did but got my 2inch about 15ft down and the pipe will not go deeper. I've spun the pipe beat it on top while the jetter is still pushing dirt out but the dang 2 inch has been very difficult to drop down . Any ideas on what to do differently?
There could be several reasons.. but I made several more videos using a powerful homemade jet. Check it out! It might answer your question and make big difference!
You are watching a video of my brother using my method..
Watch the other videos on wells on the channel
Here is the playlist
ua-cam.com/play/PLix1VT7RNAOhblDE_17kn0K1Qqsg9aaNK.html&EJGixIgBCJiu2KjB4oSJEQ
The best one is LIVE.
I did it Live to show everyone how easy it is.. that video has more tips than all the rest
ua-cam.com/users/AppleDrains
Pull it up and look at the tip. My teeth were gone at about 12 feet. I've modified it with a steel pipe nipple threaded to the end and used a plasma cutter to make metal teeth instead. I suspect that will fix my issues
What psi rating did you use?
You might have hit a rock
I may have missed it but is there a link to purchase the jet nozzle as shown here? Thanks Very informative videos!!
Amazon, search jet nozzle for sewer
How do you know when to stop drilling?
When I follow this same process, I get stuck about 10-15 feet down where it just won’t jet any further. How do I know when I’m deep enough?
What psi washer did you use?
doesn't pvc pipe and glue render the water non-potable?
Garden hoses are made with lead and aren’t recommended for drinking water. They do make hoses that are specifically safe for drinking. They’re usually white or neon green.
Not just lead, but all the PCBs, phthalates, etc that mess with your testosterone.
I am in west central FL and am having huge issues with the pipe getting stuck as I try to drive down. The first 15' went great with dirty water flushing out, but then it seems the water pressure is not strong enough to push the dirt/sand up and out. It "feels like" the downward progress sprays and stirs the sandy dirt up and then it settles back down sealing the pipe in place. I am using the 2" pipe with two garden hoses hooked up to it. Will the sewer jetter clear the sandy waste out better? Any help is appreciated.
You figure it out? I'm having a similar problem. My 2 inch pipe is stuck about 15ft down and won't budge deeper .
What psi pressure washer you use?
@@jeremecoleman8683Did you figure it out? At 15 ft in florida it is good enough water?
looks like florida
RRPOA? I'm out there.
I would not be able to go two feet without hitting rocks in my yard..
I can't go two inches without hitting a rock. lol!
Prays KING of kings+ LORD of lords? LORD JESUS CHRIST : Amen. Hallelujah!.......( Rev.19:4-22:21). Prays Holy ONE FATHER+SON+SPIRIT? HOLY ONE BIBLE 66 BOOKS+ 1189 CHAPTERS+ THE eternal promises WORDS OF CHRIST JESUS' AMEN. WORSHIPS HOLY ONE GOD!..........
Why don't they have brains enough to put a link to buy the equipment?
Amazon
👍
Video of how to dig a well. He does not go 1 inch into the ground.
Should be call guy who talks about his pressure washer.
😃🆙 and you learned how to just like the guy behind my property!! LOL
How do you take the mud?