Greetings Sir. I have to use the software for internship purposes. However, while installing, I cannot proceed to the final step (i,e., Start Installation at 5:17 minutes of the video) The "Installation summary" shows "No software will be installed or removed" instead of the file name. It would be kind to help me out about the same. With best regards, Yasir Shafi
I also faced the same problem. Then I checked which programs are installed in my PC and found that I have already installed SCAPS before. Then I unstilled SCAPS completely from my PC and reinstall it. This time I faced no problem.
@Anisa Mukherjee pl join me on zoom session so that I can see your issue and suggest you tentative solution. Pl contact me via email waleedakram280@yahoo.com Regards
@@engrmuhammadwaleedakram4486 Sir, I have managed to fix the problem I was facing. Thank you very much. Are you doing any research on Perovskite solar cells? Would love to see it as I am doing my masters degree focusing on PSCs
Hello sir, Thanks a lot, the video was really helpful. I have a question. Now that I installed SCAPS 1 D every file is appearing on the dekstop. When I am trying to make a new file and store the files there scaps dont work. When I bring the files back to deskop it works. Can you please explain because i would like to not appear on my desktop all these files but only scaps3312 which i use
Dear Rahul I HV did not make a video for the energy band diagram. But in the simulation second interface you can see the diagram. And if you want to extract data you can click on show data. After extraction of data you can plot CB and VB curves in origin software
@@engrmuhammadwaleedakram4486 sir thank you for the reply. My question is that I have to take data of single shot or batch parameters can you tell me about this.. I am getting confused in this only
After installing it on the desktop, a lot of other folders( around 22) were created on the desktop also. Can I move all those folders into one folder on the desktop ? Will it affect running the software ?
@Porismita Saikia thanks for your comment have to seen my video related to installation of SCAPs? If you still have issue please email me on waleedakram280@yahoo.com I will guide you via zoom meeting.
@Porismita Saikia I have already replied you. Also mentioned my email id if you still have issue than I can help you via zoom check my first reply please. Regards
Thank you so much for giving installation link,,I am from Bangladesh,and best wishes for u.
Welcome always
Thank you so much for the software and explanation...
@Neha Bisht thanks alot. Highly appreciated for your kind remarks
Great work💯💯💯💯💯
Thanks a lot
Thank you very much Sir, it helps me alot
@Devendra Kc you are always welcome
Greetings Sir.
I have to use the software for internship purposes.
However, while installing, I cannot proceed to the final step (i,e., Start Installation at 5:17 minutes of the video)
The "Installation summary" shows "No software will be installed or removed" instead of the file name.
It would be kind to help me out about the same.
With best regards,
Yasir Shafi
The same problem I am facing, what you did to solve the problem sir
@Krishna Priya plz watch the video step by step. If still issued remains pl email me on waleedakram280@yahoo.com
Regards
I also faced the same problem. Then I checked which programs are installed in my PC and found that I have already installed SCAPS before. Then I unstilled SCAPS completely from my PC and reinstall it. This time I faced no problem.
Gudluck dear
Thanks a lot sir..This video was very helpful.
@daphny shallet thanks alot 👍
Great Sir G💗💗💗💗
@Nouman Ch thankyou
When I am downloading
(5:16)
My Installation Summary
Is
No software will be installed or removed.
Please help sir
@Anisa Mukherjee pl join me on zoom session so that I can see your issue and suggest you tentative solution. Pl contact me via email waleedakram280@yahoo.com
Regards
Hello. How did you solve this encounter, I'm experiencing same thing.
What issue you are facing my dear??
@@engrmuhammadwaleedakram4486 Sir, I have managed to fix the problem I was facing. Thank you very much. Are you doing any research on Perovskite solar cells? Would love to see it as I am doing my masters degree focusing on PSCs
Yes I'm doing research in Tin based Perovskite solar . I am glad to see you fixed the said issue. Regards
Hello sir,
Thanks a lot, the video was really helpful. I have a question. Now that I installed SCAPS 1 D every file is appearing on the dekstop. When I am trying to make a new file and store the files there scaps dont work. When I bring the files back to deskop it works. Can you please explain because i would like to not appear on my desktop all these files but only scaps3312 which i use
I mean the files: absorption, license, occupation, results...
I think you have installed SCAPs on the desktop. But you can make folder in other drive too.
These files must be saved in the installed directory like absorption or Def folder
@@engrmuhammadwaleedakram4486 thank you sir !
@chrischris2050 you are welcome
Thanks, good luck
@mayas rustom thanks a lot
Really helpful...Thank you
@Nandhitha thanks alot stay blessed 👍
Excellent work, as always 👍
@FATIMa IKRAM8 thanks alot
Nice sir g
@Muhammad Usman thanks alot
Very informative lecture
@Talha Bajwa sab thanks alot sir ❤️
very thankful👍
Thanks for apperication 👍👍
thank you so much
@wiji wiji you are always welcome
thanks a lot, it really helped.
just a little question...do I need a license or something ?
No need of any linsence dear just go to my video description and download it via Google link. If u suffered any problem pl let me know.
JazakAllah
Plz help for installing SCAPS1d properly .....i have facing a problem error 000142...unable to start correctly
Follow this video properly and you will be able to.
Thankyou
Hello sir please help
When I am downloading
(5:16)
My Installation Summary
Is
No software will be installed or removed.
Please help sir
@Melvin Saji please check my description setup link for software is available. Pl check and let me know
@@engrmuhammadwaleedakram4486 Thank you Sir the it problem is solved 😊
@Melvin Saji welcome dear
Nice lecture
Thanks and welcome
It was really helpful
@anjalivishoni8148 thanks for appreciation 😊
Hello sir.. I want to add an energy band diagram to my article.. Do you have any video about the energy band gap through SCAPS-1D??
Dear Rahul I HV did not make a video for the energy band diagram. But in the simulation second interface you can see the diagram. And if you want to extract data you can click on show data. After extraction of data you can plot CB and VB curves in origin software
@@engrmuhammadwaleedakram4486 sir thank you for the reply. My question is that I have to take data of single shot or batch parameters can you tell me about this.. I am getting confused in this only
@rahul_32165 single shot and just mark J-V analysis on. No need to go for batch analysis or other my dear
@@engrmuhammadwaleedakram4486 thank you so much sir
@rahul_32165 let me know if you have any other concerns
Nice 😍
@Iraj Fatima thanks for comment
@@engrmuhammadwaleedakram4486 pleasure 🤗
The simukation variation of 200 steps take a very long time of 6 7 hrs to complete. Is there any way to make it faster?
No it doesn't take too much time . It takes 10 to 15 mins .
After installing it on the desktop, a lot of other folders( around 22) were created on the desktop also. Can I move all those folders into one folder on the desktop ? Will it affect running the software ?
There is no such issue . You may move one folder name with SCAPs
@@engrmuhammadwaleedakram4486 Okay. Thank you very much. ❤️
If there will be still issue let me know. Regards
Please how can i download tge AMPS 1D simulation tool
I m sorry I dnt know
Thank you sir.
so can i download the software?
@zelly boy you can download and also link is available in installation video description. You can just click and download step up easily.
Regards
sir mere laptop ka window 10 kiya hua hai but window 10 main scaps install nai hurha hai help me
🙄🙄
This reaction is not my answer 😃
I started the installation process in the way INSTALLATION SUMMARY SHOWING AS - NO SOFTWARE WILL BE INSTALLED OR REMOVED
What should I do for this
Follow up my video step by step. If you installed the software ever before, try to remove it completely
any solutions for windows11 home please
I have no idea about 11 windows dear. Sorry
sir kindly give me set up of scaps
Maryam wrote an email to me at waleedakram280@yahoo.com.
Sir after geeting link how to start to instal
@Porismita Saikia thanks for your comment have to seen my video related to installation of SCAPs? If you still have issue please email me on waleedakram280@yahoo.com I will guide you via zoom meeting.
I want source of scaps 3306, please
I dnt have this , if you need for 3.3.10 you may get it from video how to install the SCAPs description
Plz helpp me
..!!!!
@Porismita Saikia I have already replied you. Also mentioned my email id if you still have issue than I can help you via zoom check my first reply please.
Regards
Sure sir....
@Proismita Saikia email me on waleedakram280@yahoo.com
@@engrmuhammadwaleedakram4486 actually sir mera kal se project suru hone wala hein issilye jitnaho sake help mangna sahta hu apse ... 🙏
@Porismita Saikia sure please I will try my level best
thank you sir, sir can you share your email? I have some queries regarding perovskite solar cells
waleedakram280@yahoo.com here it is
Hello sir please help
When I am downloading
(5:16)
My Installation Summary is
No software will be installed or removed.
Plz follow step by step it's not tough
@@engrmuhammadwaleedakram4486 Thank you sir, I download the software, it was working good.
You are always welcome
Thanks a lot
You are always welcome