i really like then bud and they were on your red one if i remember right ? , sound great and good price ! hope all is well , sun out and off next week so best i get out lol
Good exhausts. Went for the 300mm oval as the 230 mm and 200mm make the bike run rich and are a bit too loud. Can always remove the baffles if you want even more volume. Good video mate 👍🏻
thanks bud , i like loud exhausts as they has saved my life many times but as getting older sometimes its nice to have a little less noise lol, take care bud
Great video! Just bought some Black Widow de-cat headers for my GSA, really impressed with the quality (and the cost compared to Akrapovic headers). The bike sounds much better too!!
Good video Mark nice Exhaust sounds nice without the baffle just put a new mtc exhaust on my tiger 1050 love it but a bit to loud without baffle but nice with it in take care bud keep the videos coming 👍
its always a bit of a guessing game bud i used to put to cap fills in go a fill up as they run on a bit of a pray any way lol stick to what the info on the bottle says but i find it just blacks up the plug !!!
mark i need your help mate lol i've got a 06 speed fight 2 50 cc i've brought new kick start bush, new circlip, new pinion and new pinion spring i've put it all in made it tight and when i kick start the bike the pinion fly's out of the bit it sits in almost as if the half moon is over rotating do you know what this could be. would be really really appreciated if you could make a video on this issue. thanks Deane
URGENT HELP NEEDED. Hi Mark, So i have had this Peugot Speedfight 2 100cc for a while now, it was in poor condition and needed a new bendix, spark plug and the stator magnet was cleaned. After a few changes the bike started working and running well. However, the starting was inconsistent and the sound was very loud. After about 2 months of use, i was on a long drive on a hot day and the bike started having issues. I was doing 55-60 down on the motorway and when i got to a set of lights, the bike was struggling to get going again. It then cut out and wouldnt start, so i left it for 10 minutes and it started up again to get me home. From this day, i could definitely notice a lack of power when idling at any lights or just when stopped, i didnt take this as a big issue as i would just open up the throttle to maintain the revs. Anyway i go holiday for 16 days and when i come back there was an issue with the bike where it would start backfiring when i was driving and only seemed to get more frequent. The smell of fuel/oil was very strong while i was driving too. After about a week of this issue, the bike stopped working full stop and would start for a few seconds and cut out again. After examining the spark plug it was black and oily, as well as this there seems to be a lot of carbon all around the outside of the engine and where the exhaust meets the motor. I have done the following changes to try to improve the situation, - Replaced the piston + rings - Replaced the gaskets - Replaced automatic choke with a manual choke - Adjusted and cleaned the carb Here is another list of things i have changed since it was standing, - New Spark Plug (BR8ES) - New Bendix - New air filter (Parlini) - Cleaned the rust of stator magnet - Replaced all crank case housing bolts - Replaced Battery - New rollers - Replaced the wool in the exhaust The bike has been out of action for around a month and with the new gaskets the sound has gotten quiet but the bike cant go up the road without spluttering and popping until it stops, this issue is really getting me down. I am only 19 and would appreciate any help that i can get and can provide lots more details if needed. Thanks, Kian.
Hi Mark. Just wondering if you know anything about 4 stroke mopeds. Mines a 50 and kept cutting out when I got to traffic lights and junctions, if got it home and checked the air filter, fuel filter, valve clearances, oil, iv changed the idle and when I turn the idle tighter it revves higher to the point the wheels going on it's own. And there is no inbetween. Any chance you could help?
I have a few videos on 4t mopeds on my channel they should help , but age of ped , e10 or e5 fuel , have you had it sitting with e10 in it ? clean carb as in my videos bud
Hi Mark, i just bought a speedfight 2 2006 LC and the variator doesnt seem to have a washer but a big plate on back of the front variator. Is the plate the restrictor?
Hi,Mark...I have a forza 125cc 2021...and been looking for the downpipe,to fit..as I need one with the O2 sensor connection...but finding it hard to find one...any suggestions ?thanks
@@marksavage Well, they got back to me from Black Widow. And said that the systems wouldn't fit my bike, Zzr 1400 (13) with a centre stand. Do they not have a bump stop I guess.
That looks so much better Mark 👍
Bought a black widow for my gsx1400, good quality, great price, sounds epic. Agree on thoughtful packaging too.
they do sound good bud
That's what was on me bandit great exhaust systems.anyway it's good to see you back again young man 👍👍
i really like then bud and they were on your red one if i remember right ? , sound great and good price !
hope all is well , sun out and off next week so best i get out lol
That bike is lush, love the new exhausts 😍😍
really do look and sound good
Looking good Mark, Happy Days.
they do bud and thanks ,take care
Good exhausts. Went for the 300mm oval as the 230 mm and 200mm make the bike run rich and are a bit too loud. Can always remove the baffles if you want even more volume. Good video mate 👍🏻
thanks bud , i like loud exhausts as they has saved my life many times but as getting older sometimes its nice to have a little less noise lol, take care bud
Great video! Just bought some Black Widow de-cat headers for my GSA, really impressed with the quality (and the cost compared to Akrapovic headers). The bike sounds much better too!!
the prices are amazing compared to them but have to agree all round great looking and sound good too
great mark and black widow very fair price and saves weight and sounds loads better
totally agree bud , thanks for watching
They look mint Mark
they really do bud thanks
Hi I notice the stop for the sidestand did you have to measure up for that or did it come as standard.
Good video Mark nice Exhaust sounds nice without the baffle just put a new mtc exhaust on my tiger 1050 love it but a bit to loud without baffle but nice with it in take care bud keep the videos coming 👍
Thanks bud
I've got a arrow on my tiger without baffle
Sounds good
Really good video
Thanks bud
Ayo mark got a question is it ok if i mix 10ml/1L gas for peugeot speedfight 2 it has no setup just sport exaust
its always a bit of a guessing game bud i used to put to cap fills in go a fill up as they run on a bit of a pray any way lol
stick to what the info on the bottle says but i find it just blacks up the plug !!!
mark i need your help mate lol i've got a 06 speed fight 2 50 cc i've brought new kick start bush, new circlip, new pinion and new pinion spring i've put it all in made it tight and when i kick start the bike the pinion fly's out of the bit it sits in almost as if the half moon is over rotating do you know what this could be. would be really really appreciated if you could make a video on this issue. thanks Deane
URGENT HELP NEEDED.
Hi Mark,
So i have had this Peugot Speedfight 2 100cc for a while now, it was in poor condition and needed a new bendix, spark plug and the stator magnet was cleaned. After a few changes the bike started working and running well. However, the starting was inconsistent and the sound was very loud.
After about 2 months of use, i was on a long drive on a hot day and the bike started having issues. I was doing 55-60 down on the motorway and when i got to a set of lights, the bike was struggling to get going again. It then cut out and wouldnt start, so i left it for 10 minutes and it started up again to get me home.
From this day, i could definitely notice a lack of power when idling at any lights or just when stopped, i didnt take this as a big issue as i would just open up the throttle to maintain the revs. Anyway i go holiday for 16 days and when i come back there was an issue with the bike where it would start backfiring when i was driving and only seemed to get more frequent. The smell of fuel/oil was very strong while i was driving too.
After about a week of this issue, the bike stopped working full stop and would start for a few seconds and cut out again. After examining the spark plug it was black and oily, as well as this there seems to be a lot of carbon all around the outside of the engine and where the exhaust meets the motor.
I have done the following changes to try to improve the situation,
- Replaced the piston + rings
- Replaced the gaskets
- Replaced automatic choke with a manual choke
- Adjusted and cleaned the carb
Here is another list of things i have changed since it was standing,
- New Spark Plug (BR8ES)
- New Bendix
- New air filter (Parlini)
- Cleaned the rust of stator magnet
- Replaced all crank case housing bolts
- Replaced Battery
- New rollers
- Replaced the wool in the exhaust
The bike has been out of action for around a month and with the new gaskets the sound has gotten quiet but the bike cant go up the road without spluttering and popping until it stops, this issue is really getting me down.
I am only 19 and would appreciate any help that i can get and can provide lots more details if needed.
Thanks,
Kian.
Also as answered in other message
Is the noise coming from the engine or variator side
Also did you check crank seals
Hi Mark. Just wondering if you know anything about 4 stroke mopeds. Mines a 50 and kept cutting out when I got to traffic lights and junctions, if got it home and checked the air filter, fuel filter, valve clearances, oil, iv changed the idle and when I turn the idle tighter it revves higher to the point the wheels going on it's own. And there is no inbetween. Any chance you could help?
I have a few videos on 4t mopeds on my channel they should help , but age of ped , e10 or e5 fuel , have you had it sitting with e10 in it ?
clean carb as in my videos bud
@@marksavage hi it's a 2020 sym mask, since I bought it I have always put e5 fuel but I'm not sure what the previous owner was using.
Yo mark do you know the original peugeot speedfight 2 carb adjustment like how many times should i turn to get a good mixture
Hi bud ua-cam.com/video/6n5YuLxc4VA/v-deo.html
Give this a watch
But I've got a load of videos of the settings
Air mix etc
@@marksavage Thanks
That looks great and I’m not an aftermarket pipe fan 👌🏻🔧
they made a massive difference in the look with the bike and sound steve , i am happy bud
@@marksavage that’s the important thing, you’re happy 😎
Hi Mark, i just bought a speedfight 2 2006 LC and the variator doesnt seem to have a washer but a big plate on back of the front variator. Is the plate the restrictor?
That can come off bud , its the one that has 3 screws holding it on to the rear of the variator
@@marksavage thanks Mark!
Hi,Mark...I have a forza 125cc 2021...and been looking for the downpipe,to fit..as I need one with the O2 sensor connection...but finding it hard to find one...any suggestions ?thanks
Did you contact blackwidow bud
As they manufacture exhausts downpipes etc
Worth a go
Say you watched my video and see if they can help bud
@@marksavage thanks for that my friend...will do that,keep the great videos coming 👍
hi mate i have silencer looks like that will it be ok on my moped love your dog i have a cane corso
See how it runs bud , if its for you 2t ped then no as needs back pressure bud
@@marksavage ok mate thanks for your help i stick with one on it i spray it thanks
I have the Gen 2, I've heard there's some issues regarding fitment and centre stand?
I can't see why there would be fitting problems but if worried contact them as they are really helpful
Great price and sound good too
@@marksavage Well, they got back to me from Black Widow. And said that the systems wouldn't fit my bike, Zzr 1400 (13) with a centre stand. Do they not have a bump stop I guess.
@@matthewjackson3034 well that's a little disappointing to be honest ! Wouldn't have thought there was much difference
@@marksavage Yea, rather gutted.
Hi.Do you now where limiter is placed in speedfight 2?
As in my videos bud
Variator, exhaust , carb , air intake
@@marksavage in which video?
@@davios6703 type in mark savage and them the item as in variator ,theres a play list of 100 speedfight videos bud
Looks better. But silencers 10 cm further forward would look even better. ;-)
Come in any sizes bud
@@marksavage Yes, I know, you're rigtht. Sometimes it's possible to shorten the pipe a bit.
The legend of mikujava.Monster is the best ! snowquen's is my idol. Hes the person I aspireb to be, hes my light of day.