12V upgrade and complete wiring Puch Magnum rebuild Pt 5
Вставка
- Опубліковано 16 вер 2021
- In this video I completely rewire the magnum. I also upgrade to 12v lighting.
I will post a wiring diagram in a day once I draw it out nicely.
This is the 12v coil from treatland.tv - www.treatland.tv/puch-12-volt...
#Rewire #Puch #PuchMagnum
Gear Links
Main Camera amzn.to/3qw1Cnt
Main Lens amzn.to/3qsSOPf
Wide Lens amzn.to/3pwmOdQ
Portrait lens amzn.to/32ooNbv
Mic amzn.to/3HgkBch
Light amzn.to/3qw2SXJ
360 Camera amzn.to/3euCkjV
Selfie stick amzn.to/3pxJGJK - Авто та транспорт
Did you ever end up posting a wiring diagram?
great video and nicely produced thanks
Thank you!
Very good video, the Quality is very good. Feels like i am watching a UA-camr with a lot of subscribers. Respect! And you have some really nice bikes! I just finished restoring my puch maxi!
Thank you! Im trying to get more subs but I gotta start somewhere.
Nice and useful video!
Thanks for watching
Perfect work . 👌
Thank you!
I love your videos man, such great informative content. If you ever start a vespa/piaggio ped project I'll be even more hooked, so little stuff out there to help me know where to start on my Grande
Thanks! I have a ciao that I have been meaning to work on!
do you have the wiring diagram ?
I saw that you plugged the ground in the headlight in the middle section and the power on the right. Currently I have it the opposite, should I switch them?
If I remember correctly I think I was using a single filament lightbulb on this build and thats just the prong that went to the lightbulb. Normally that light uses a high/low bulb. but its a weak system so they are both low, so I just use the high.
@@Corn-ped I was able to get spark last week (yay)! But thanks for the response!! :D
What gauge electrical wire do you use?
I am using 18ga stranded copper wire. I like 18, not too thick and not to thin.
Link to LED taillight?
2pc 5" Red LED Motorcycle Turn Signal & Brake Tail Light Strip Kit [IP68 Waterproof] [Single Row] [50% Running Light] [100% Brake/Turn Signals] Flexible Tail Light Strip for Motorcycle Trailer ATV www.amazon.com/dp/B07YNZ97DF/ref=cm_sw_r_apan_glt_fabc_M555R7K0Y44NXX1ZEDZ3?_encoding=UTF8&psc=1
Can you run the 12v lighting coil with the stock Bosch coil?.
yes you can! thats what I did with this stator.
@@Corn-ped wait, does the 12v coil not need to be floated? I thought I heard that having 6v and 12v sharing a ground leads to arcing.
I'm in the middle of this right Now on my Maxi/Magnum Hybrid "maxi frame magnum forks and swingarm."mine is going to be a 12 volt DC system though!... All lights will be LED and have their own common 12volt DC ground totally independent from the frame also the 12 volt lighting Coil ground will need to be floated from the frame.All circuits LED headlight/ LED gauge lights,...LED Tail light,... LED brake light,...LED directionals and 12volt DC horn will have their own fuses via a ATO fuse block.only the ignition will remain stock 6 volt AC points system which does use the frame as ground as was stock.The 12 volt lighting coil will be regulated and rectified via a Treats regulator/rectifier. this will require an entirely new wiring harness which i am building now from a set of schematics i drew up.wish me luck?
Lol you said radio shack your showing your age my dude. I miss the days of radio shack. I know upgrading my light from 6v to 12v would be a nice improvement I imagine I'd need to get a 12v bulb to. But my big question is would upgrading the ignition to 12v really make a noticeable difference in power. I know better spark will make better power but ped runs great with the 6v I'm running the 72cc airsal big fin 19mm long sweeping intake 19mm polini 100main jet stock crank trickmetric 6.4 version with light springs 16x34 gears and a proma circuit exhaust with a simioni silencer. Gets me up to 40mph really quick but it feels like it just hits a wall and wont rev out anymore other people say its because I didnt casematch but I did port match. I was running a bigger carb for a while a 21mm pwk but it was always leaking and having issues but the polini has been great
12v vs 6v wont give your engine more power. It looks like you are hitting a wall because you have a proma circuit pipe. Circuit pipes dont hit high rpm. They have great low end, but they hit a wall.
@@Corn-ped I wanted to get the estoril with the sidebleed will I get better topend with that or maybe you can suggest a pipe
Perfect. Now please sell it to me 😀
Ahhhh Sorry Mike this was for a buddy! He is riding it all around town. He does have a UPS magnum he wants to sell if you can get to Minnesota!
@@Corn-ped Im in florida :(
@@bmwmike3534 make the trip!
I don't if your telling the truth that the puch is running how come you don't have a video on it
This was a customers bike. I got it jetted for them and they picked it up. I didnt get much time to test ride it. I would have made a video of it running but at this time I was typically making videos at night after my kids were sleeping and keeping an eye on them with the baby monitor. Even the clip of this leaning against the fest was from a different day. This video was all shot from 10-12pm at night.
What gauge wire do you use?
I m using copper 18 ga