I had the Exact Square Body Chevy Truck, Slod it last winter, Same Color, Same Lift, Same Wheels, Same Steps! When I saw it I was Like OMG!! There's my truck!!
The 150 was plenty for fishing Lake Erie unfortunately a tree fell on this boat last year and destroyed it. I replaced it with a 2023 Yamaha 195FSH sport
nice rig. I have the exact same boat but mines a 2018. this may or may not interest you, but I have the standard 150efi four stroke. I was getting 47mph trimmed pretty much all the way up like you do and was running 6100-6200 rpm. I noticed you were just over 6 k as well. I switched from a 14x18p enertia to a 13.8x20p enertia and trimmed up im actually about 3-4 mph faster than yours is (53mph with the 150), so I picked up about 6 mph. if you went up one pitch I think you would see 55-56 mph, which is no joke in a boat as heavy as ours. these hulls are built like tanks. you might be the type to want everything you can squeeze out of it, or may not see 5 more mph as justification for a $500 prop. super nice rig and thx for the ride brother
about 5600 which just about smack in the middle of my suggested max. I should add, I run with very light loads. 6 rods and couple of trays of artificials (rattle traps etc) , , , , I think they prop these boats to run heavy by folks that might not know how to really trim it out running flat out. im not sure what prop you have or the suggested rpm range of your pro xs, but I think you would see 5-6 mph.
Bryan Carpenter it’s a mercury tempest 17p 6000 is supposed to be max. Can’t remember the range for its best. Have to look it up. I have been thinking about doing an 18 but just a little scared with it being 600$ and there is a chance it may not do much or be really bad for the motor. Then I’m back to where I started 600$ less. One day I’ll pull trigger
well, my max rpm is 5800 and I was tickling 6100. if you do ever move on a new prop, go with the enertia. its not only designed for heavier boats, but its made from mercurys new x7 alloy. google it. its 30% stronger for flex than conventional stainless and 50% more abrasion and shear strength. this means thinner blades can be used in similar pitches compared to stainless. I would need to know your diameter to suggest one with confidence, but now I think you would pick up more speed than I first thought (with an x7 enertia) let me know your diameter, and I will suggest a enertia, then you run it by mercury in Wisconsin. they are easy to get ahold of and super great to deal with. it definitely wont hurt your motor if you stay within your suggested rpm range. I would be thrilled to help you pick one. jeez, you could see 7 even 8 mph.
I have the exact same boat same year everything just a different truck ha ha thanks for the vid nice boat. They are nice to drive and fish and of course take the family out in. 👍
Thank you! Picking up the 2020 model next week. It only has the 150 anything near or north 40 MPH is fine by me. I upgraded the trolling motor as well with the integrated fish finder.
Glenn Rhodes that’s the one thing I wish I would have done one the beginning was upgrade the trolling with a fish finder. I need one up front for sure!!!
I’m about to buy this boat at bass pro shop here in Alaska. Got approved for the loan. I think it should do good in Whittier and seward for halibut and salmon as well as the lakes around here for lake trout and char
matanuska high Honestly I think you will be really impressed. It handles water very well and sure there are a few things I want to improve but overall I have no complaints
I am looking at getting this same exact boat. Would you recommend getting the 200HP motor? I know you almost got to 50 MPH with just you and gear. I am not a tournament fisherman. Just want something I can casually fish with and take the family out on so my little ones can tube and be comfortable on.
William Koch I would spend the extra 2 or 3 grand for it. My 175 has plenty of torque to pull tubes or skis. And plenty fast enough for me. Sure more horsepower is always better but I have been running it for 3 months now and not one time said I wish I would have gotten the 200.
the boat is rated for a 200hp. Ask your dealer if you can get the boat with out a Mercury and go with a Evinrude 200hp H.O. The H.O version is actually almost a 220HP engine.
Thx for the video. I'm thinking about picking up a 2021 Targa V18. How has the new wench worked since the last one broke on you? Hopefully it was just a fluke. Thx
I'm curious, you said the speedometer doesn't work. That's a new boat, did they fix it? I'm looking at a Targa but saw some other problems like that with other UA-cam channels. Making me think the Targa may have electronic issues, or is it just Tracker problems?
k9mick121 so i forgot to ask about it when I took my boat in for service but did call after the fact to see if it would cost me anything. They did say it is covered under warranty and that the speedo is measured by water speed through a jet. It is prob plugged. But I use the speed on my depth finder. It is gps and super accurate. I wouldn’t let the speedo keep you from buying what you want.
I'm in the market for a 16-17 ft boat. My wife and I like fishing and boating around. We are in Oregon, and every summer, we drive to our cabin in Montana near Flathead lake. I've never owned a boat before, and seeing this video has helped give insight into launching and retrieving it. I'm curious what that black pole on your trailer is used for. Is it just a hand rail to help you up? Subscribed.
Also, I made a set of hitch mudflaps, i started getting rock pits in the paint like crazy and bought a windshield cover. Great review though, mines a 2017 and was looking to trade it in but might keep it around. They are still pretty similar.
What RPM do you usually cruise at just going spot to spot? I have the 150 stock 4-stroke on mine and she seems to settle nicely at about 4400/4500 for me around 32-33 mph with gear and crew.
Hi. I’m looking at picking up a 2010 v18 targa but it came factory with a 115. Wondering what your thought is on a 115 on this boat compared to yours with a 175.
I honestly could not give you great advice on that. My 175 does really good at getting the boat out of the water and runs about 48mph. Does well pulling a tube. But a 115 might be fine with cruising and fishing but pulling anything I would imagine it would be to weak. Honestly don’t know though.
@@8michael7 all good. Thank you for your honest answer. If I can touch upwards of 40mph I’d be happy. If I do buy it I’d definitely keep my eyes open for a 150-200 hp motor to upgrade it eventually
Yes I do still have the boat. I have made a video about every issue I have had with it. As to quality it has been a couple few issues with it but nothing crazy. Biggest mechanical has been trailer. Overall opinion I like the boat very much and it works perfect size and capability wise for me and my family.
Russell Sands power wise no problem. But it has a 5.0L what does suck is the suspension. It really bounces the truck often. But my buddy pulled it with his 2012 ram 1500 and truck didn’t move going down the highway. So if your pulling long distance I would recommend bigger truck or smaller boat. Anything less than an hour away a would say you be fine. I think the boat tow weight is about 4000 lb.
do you use the poles they give you with the boat cover?..the reason I ask is because I can't seem to get the cover to fit over the back corners very well...
Paul Provan I can and used them but very rare. I use my seat on this back deck most of the time. The poles are adjustable. Twist them to make them taller or shorter so the cover fits. Hope that helps.
@@8michael7 so this cover that comes with the boat is a decent travel cover then?..that's what I was told at the dealer...does it blow all around at 70 mph on the interstate?..I just got a 2021 targa 18 yesterday.
Paul Provan mmm I have traveled to Arkansas 10 hrs 3 times and Minnesota twice 12 hours. It has taken a beating but still is holding up. So if you can travel without it will last longer. But whatever you do do not travel with your flip up seats up and cover on. The footing will tear a hole in the cover which I had to send back and they patched.
vivalosdoors yes. First 2 hours adjusting rpm between 3000 and 4500. Every 10 min full throttle for no more than 1 min. After the 2 hours continuing to vary rpm but if you go full throttle do not hold it longer than 5 min. Once you have put 10 hours on the motor doing that procedure the motor will be officially broke in. Let me know if you have any more questions
@@8michael7 i currently have a 19' glasstream bass boat with a 150 mariner and can get 200 miles on a 35 gallon tank hoping it will get that or better thanks for the info
So with my 175hp through the entire week I burned about 32 gallons of fuel. My trip says I went 177 miles the whole week. Now for probably at least 100-120 of the miles involved pulling a tube. hope this info helps.
Mr. DIY how to painting welding fabrication mmm I have fished 5 people jigging and 4 casting for bass and can manage pretty well but fishing 2 in the front would be pretty tight I think
@@mr.diyhowtopaintingwelding4479 the front on the trackers are WAY to small. look at the same size alumacraft competitor 185. great lay out compared. the tracker is a heavier boat and will handle the great lakes alittle better imo.
Tariq Khan oh man that’s a real good question. In June I am going to be running it hard for 2 weeks straight. I’ll try to figure it out. I feel like the fuel economy is pretty good though.
Kick ass THRASHER! The boats lookin gud. By the way some people cant and you certainly can (back up your trail1l3. effortless). Good job! Whats your favorite mode on the fishfinder. Bio
Ha Thanks for the words. on the fishfinder I keep it split between the 2D sonar and the down imaging. Doing that allows me to confirm what I am seeing between the 2
I had the Exact Square Body Chevy Truck, Slod it last winter, Same Color, Same Lift, Same Wheels, Same Steps! When I saw it I was Like OMG!! There's my truck!!
Motorcycle Rides I bought mine in August 2018 in Niles IL. Lol
Very nice just picked up my 2019 V18 combo yesterday. Hopefully after work tomorrow I can try it out. Thanks for the video.
Al, see my comment above. Do you recommend the 200 HP?
@@willmann81785 I have a 150hp. And I haven't run it been working trying for tomorrow
@@alnagy1700update? Is the 150 enough horsepower or do you recommend the 200?
The 150 was plenty for fishing Lake Erie unfortunately a tree fell on this boat last year and destroyed it. I replaced it with a 2023 Yamaha 195FSH sport
nice rig. I have the exact same boat but mines a 2018. this may or may not interest you, but I have the standard 150efi four stroke. I was getting 47mph trimmed pretty much all the way up like you do and was running 6100-6200 rpm. I noticed you were just over 6 k as well. I switched from a 14x18p enertia to a 13.8x20p enertia and trimmed up im actually about 3-4 mph faster than yours is (53mph with the 150), so I picked up about 6 mph. if you went up one pitch I think you would see 55-56 mph, which is no joke in a boat as heavy as ours. these hulls are built like tanks. you might be the type to want everything you can squeeze out of it, or may not see 5 more mph as justification for a $500 prop. super nice rig and thx for the ride brother
by the way, I also went with the ipilot, and your right, its a huge improvement
Thanks for the info. I didn’t think the 25hp would be that much more speed. What rpm are you getting with the new prop at top speed?
about 5600 which just about smack in the middle of my suggested max. I should add, I run with very light loads. 6 rods and couple of trays of artificials (rattle traps etc) , , , , I think they prop these boats to run heavy by folks that might not know how to really trim it out running flat out. im not sure what prop you have or the suggested rpm range of your pro xs, but I think you would see 5-6 mph.
Bryan Carpenter it’s a mercury tempest 17p 6000 is supposed to be max. Can’t remember the range for its best. Have to look it up. I have been thinking about doing an 18 but just a little scared with it being 600$ and there is a chance it may not do much or be really bad for the motor. Then I’m back to where I started 600$ less. One day I’ll pull trigger
well, my max rpm is 5800 and I was tickling 6100. if you do ever move on a new prop, go with the enertia. its not only designed for heavier boats, but its made from mercurys new x7 alloy. google it. its 30% stronger for flex than conventional stainless and 50% more abrasion and shear strength. this means thinner blades can be used in similar pitches compared to stainless. I would need to know your diameter to suggest one with confidence, but now I think you would pick up more speed than I first thought (with an x7 enertia) let me know your diameter, and I will suggest a enertia, then you run it by mercury in Wisconsin. they are easy to get ahold of and super great to deal with. it definitely wont hurt your motor if you stay within your suggested rpm range. I would be thrilled to help you pick one. jeez, you could see 7 even 8 mph.
Thanks for the review had my eye on one for awhile
I have the exact same boat same year everything just a different truck ha ha thanks for the vid nice boat. They are nice to drive and fish and of course take the family out in. 👍
Thank you! Picking up the 2020 model next week. It only has the 150 anything near or north 40 MPH is fine by me. I upgraded the trolling motor as well with the integrated fish finder.
Glenn Rhodes that’s the one thing I wish I would have done one the beginning was upgrade the trolling with a fish finder. I need one up front for sure!!!
The 150hp will take you 45.8 mph with a full tank and live well filled.
Like the boat a lot…love the red Chevy.
Nice boat..I have been eye 👁n this one for a while now.
You now I had grown up in a boat like that me and dad fishing all day good times now go make some ...fish on my friend
Nice squarebody! Boat looks great as well
Thanks
Supper nice boat!
I’m about to buy this boat at bass pro shop here in Alaska. Got approved for the loan. I think it should do good in Whittier and seward for halibut and salmon as well as the lakes around here for lake trout and char
matanuska high Honestly I think you will be really impressed. It handles water very well and sure there are a few things I want to improve but overall I have no complaints
Thrashing Outdoors awesome! Thanks man! We went with the V20 version. It’s going for prep as I type this.
Like your truck also good video 👍
I am looking at getting this same exact boat. Would you recommend getting the 200HP motor? I know you almost got to 50 MPH with just you and gear. I am not a tournament fisherman. Just want something I can casually fish with and take the family out on so my little ones can tube and be comfortable on.
William Koch I would spend the extra 2 or 3 grand for it. My 175 has plenty of torque to pull tubes or skis. And plenty fast enough for me. Sure more horsepower is always better but I have been running it for 3 months now and not one time said I wish I would have gotten the 200.
With four grown men I was hitting 46.7 mph at top speed but honestly I barely run it over 35-40 mph at 4000-4500 rpm
@@willmann81785 I would of been happy with a 115hp because it's better on gas.
the boat is rated for a 200hp. Ask your dealer if you can get the boat with out a Mercury and go with a Evinrude 200hp H.O. The H.O version is actually almost a 220HP engine.
I have the same boat with 200 horses ... the speed is 41 miles per hour (((
Thx for the video. I'm thinking about picking up a 2021 Targa V18. How has the new wench worked since the last one broke on you? Hopefully it was just a fluke. Thx
So far no issues but have only used it 5 -10 times since it’s been replaced
I'm curious, you said the speedometer doesn't work. That's a new boat, did they fix it? I'm looking at a Targa but saw some other problems like that with other UA-cam channels. Making me think the Targa may have electronic issues, or is it just Tracker problems?
k9mick121 so i forgot to ask about it when I took my boat in for service but did call after the fact to see if it would cost me anything. They did say it is covered under warranty and that the speedo is measured by water speed through a jet. It is prob plugged. But I use the speed on my depth finder. It is gps and super accurate. I wouldn’t let the speedo keep you from buying what you want.
Is that Lake Heidecke? I can tell by the launch and
the two parking lots haha
Kjg_fishing haha yes sir it is
Thrashing Outdoors you can’t mistake that place haha great place to fish when it’s not to hot out haha
I'm in the market for a 16-17 ft boat. My wife and I like fishing and boating around. We are in Oregon, and every summer, we drive to our cabin in Montana near Flathead lake. I've never owned a boat before, and seeing this video has helped give insight into launching and retrieving it. I'm curious what that black pole on your trailer is used for. Is it just a hand rail to help you up? Subscribed.
Ramzi S yea the pole is just attached to a couple steps for you to enter the boat from the front. Makes it easier to get in if there is no doc
Just a heads up I stopped traveling with my cover on. They loosen up and catch air in front of the ratchets and it beats the crap out of the cover.
Also, I made a set of hitch mudflaps, i started getting rock pits in the paint like crazy and bought a windshield cover. Great review though, mines a 2017 and was looking to trade it in but might keep it around. They are still pretty similar.
I have been noticing it has been taking a beating. I’m kinda in the same boat now except for the really long trips.
Thanks good overview
That’s Heidecke lake
Impressive mic. 👌
What RPM do you usually cruise at just going spot to spot? I have the 150 stock 4-stroke on mine and she seems to settle nicely at about 4400/4500 for me around 32-33 mph with gear and crew.
Yea that’s pretty close. I think usually about 4000-4500 which runs like 35-36. It seems happy right there and doesn’t guzzle the fuel as bad
You think it could handle salmon trolling on Lake Michigan? On a calm day of course.
Absolutely
Hi. I’m looking at picking up a 2010 v18 targa but it came factory with a 115. Wondering what your thought is on a 115 on this boat compared to yours with a 175.
I honestly could not give you great advice on that. My 175 does really good at getting the boat out of the water and runs about 48mph. Does well pulling a tube. But a 115 might be fine with cruising and fishing but pulling anything I would imagine it would be to weak. Honestly don’t know though.
@@8michael7 all good. Thank you for your honest answer. If I can touch upwards of 40mph I’d be happy. If I do buy it I’d definitely keep my eyes open for a 150-200 hp motor to upgrade it eventually
No life jacket when you are driving at high speed.?? 🤔
How did you get the 175 motor? On the tracker website, I can only choose between a 150 and 200
It was what was on it when I bought it. But it might had be a 2019 model thing cause I remember the option when I was looking to build one too
Cool boat how much was it?
Lacey Kevin it was priced at $37500 before taxes and all
That’s Heidekee isn’t it!
Yep
That’s a nice k30 you have
Thanks. Stay Tuned because I started doing some rehab to it which I will be posting.
Do you still have this boat? What is your overall opinion on it? And problems so fat
Yes I do still have the boat. I have made a video about every issue I have had with it. As to quality it has been a couple few issues with it but nothing crazy. Biggest mechanical has been trailer. Overall opinion I like the boat very much and it works perfect size and capability wise for me and my family.
How well does your truck pull this boat? I have a Honda Ridgeline that can tow 6000lbs but its just a V6.
Russell Sands power wise no problem. But it has a 5.0L what does suck is the suspension. It really bounces the truck often. But my buddy pulled it with his 2012 ram 1500 and truck didn’t move going down the highway. So if your pulling long distance I would recommend bigger truck or smaller boat. Anything less than an hour away a would say you be fine. I think the boat tow weight is about 4000 lb.
Would it be difficult to fish two off the front deck? It looks a little small.
Yea it prob could be done but I don’t think it would be enjoyable. Would be very tight
How is the 175 pro XS on fuel? Think the new 200 is worth the upgrade?
Bradford D it’s hard to give it an actual reading but I don’t think it to bad at all
do you use the poles they give you with the boat cover?..the reason I ask is because I can't seem to get the cover to fit over the back corners very well...
Paul Provan I can and used them but very rare. I use my seat on this back deck most of the time. The poles are adjustable. Twist them to make them taller or shorter so the cover fits. Hope that helps.
@@8michael7 thanks man...I just was seeing a lot of folks not using the poles.
Paul Provan I only basically use them when it’s sitting. They fall down 3 miles into any trip.
@@8michael7 so this cover that comes with the boat is a decent travel cover then?..that's what I was told at the dealer...does it blow all around at 70 mph on the interstate?..I just got a 2021 targa 18 yesterday.
Paul Provan mmm I have traveled to Arkansas 10 hrs 3 times and Minnesota twice 12 hours. It has taken a beating but still is holding up. So if you can travel without it will last longer. But whatever you do do not travel with your flip up seats up and cover on. The footing will tear a hole in the cover which I had to send back and they patched.
What’s name of the cover you have ?
My boat cover at this time was just tue one from bass pro that came with. The one I have now I can’t remember where I ordered it from.
Question could you take that boat to the ocean and fish out of it comfortable
Joe Dirt I’m not sure. I would say yes to a certain extent. It can handle some decent waves and you can go quite a few miles on a tank of fuel.
Did you lose the life preserver or did you grab it? One sec it was there and next it was gone lol
Hahha no I grabbed it.
Sorry if I missed it but I’d this a 150 pro xs or the 175 pro xs?
175 pro xs
Would you be willing to do a similar video with a 2021 18' Targa Combo?
If I had a way to get the keys to one I definitely would.
Is there a suggested motor break in procedure for the pro xs 175?
vivalosdoors yes. First 2 hours adjusting rpm between 3000 and 4500. Every 10 min full throttle for no more than 1 min. After the 2 hours continuing to vary rpm but if you go full throttle do not hold it longer than 5 min. Once you have put 10 hours on the motor doing that procedure the motor will be officially broke in. Let me know if you have any more questions
May i ask where you purchased the steps for the trailer?
They came with the boat.
I'm looking at getting the 2021 model what kind of fuel range would I be looking at with the 200hp?
Not 100% positive but with the 175 it’s really not to bad. I can drive all week long on 1 tank of fuel
@@8michael7 i currently have a 19' glasstream bass boat with a 150 mariner and can get 200 miles on a 35 gallon tank hoping it will get that or better thanks for the info
I leave tomar for vacation so through the week I’ll keep an eye on it and let ya know
So with my 175hp through the entire week I burned about 32 gallons of fuel. My trip says I went 177 miles the whole week. Now for probably at least 100-120 of the miles involved pulling a tube. hope this info helps.
@@8michael7 absolutely thank you for getting back to me
I'm thinking about the v18 wt with 150 pro xs
Mr. DIY how to painting welding fabrication it’s a good boat.
@@8michael7 thanks I was just worried about not having enough room in the front.can 2 people fish off the front.i havent seen one in person yet.
Mr. DIY how to painting welding fabrication mmm I have fished 5 people jigging and 4 casting for bass and can manage pretty well but fishing 2 in the front would be pretty tight I think
@@mr.diyhowtopaintingwelding4479 the front on the trackers are WAY to small. look at the same size alumacraft competitor 185. great lay out compared. the tracker is a heavier boat and will handle the great lakes alittle better imo.
How many nautical miles per gallon you get on this thing???
Tariq Khan oh man that’s a real good question. In June I am going to be running it hard for 2 weeks straight. I’ll try to figure it out. I feel like the fuel economy is pretty good though.
@@8michael7 Excellent, yeah see if you can figure out the fuel economy on this beast. Thanx for a very quick reply. Stay safe.
really need such music?
Kick ass THRASHER! The boats lookin gud. By the way some people cant and you certainly can (back up your trail1l3. effortless). Good job! Whats your favorite mode on the fishfinder.
Bio
Ha Thanks for the words. on the fishfinder I keep it split between the 2D sonar and the down imaging. Doing that allows me to confirm what I am seeing between the 2
How fast will it run?
Half tank of fuel and just me with all my fishing gear I hit top speed of 50