I cannot thank you enough for including your mistakes. You will positively affect my mood and actions the next time I screw up. Which should be any minute now. Seriously, thank you.
Now I'm tempted to say that "your drills also sound annoying - why don't you do something about it?", and see what he comes up with :D That table saw comical beeping was golden! :D
Now that’s a functional design that addresses all those design considerations like: 1) where to put container 2) where to leave container now that you’ve taken out a “section” 3) how to close container now that you’re holding a section (and drill and washers and pencil....) and 4) how to annoy at every opportunity some doofus complaining about noise they are choosing to receive on their very own device rather than reading manual which probably indicates where volume switches are....!!! Ha, wet myself laughing every time!! Seriously good editing and a seriously good mistake that we’ve all sort of made. Thanks very much for all that work and for seriously thinking thru the limitations of working with these great containers...
I love your sense of humor. I always get a laugh from your videos. I'm glad to see a pro put the drawer slides on backward. Makes feel less like an idiot.
I took your advice and rewound it three times. Frankly, I'm shocked and dismayed that a professional of your caliber would make the same exact mistake three times.
Wow. Great project. Attention to detail is incredible. You make it look so easy. I saw the same "improvement" needed in the Savage video but instead of a tray, I only installed drawers in mine. Your tray solution is way more elegant and useful. There are many of these "Sortimo" videos on YT but your design is the best. Bravo! : )
The only thing I don't like about you vids, are the people that try to tell you what's wrong with them. I love the content, and the humor, and also how you screw up once in a while to make us feel better. I'm sure this is difficult for you to do. I love the little tricks I see and don't feel bad at all about stealing them and making them part of my tool bag. Thank you!
We all make really stupid shop mistakes though not everybody is willing to admit. Glad you shared. Look at it this way way ... the good news you hadn't GLUED and screwed the back on.
Absolutely love the Jetson table saw sound. George Jetson wasn't much of a woodworker - her was too concerned to hurt his button pressing finger. Subscribed .
UA-cam suggested one of your videos to me today, and I'm about 4 videos in and subscribed. Your channel is a little Jimmy Diresta, a little This Old Tony, and a lot original. I dig it.
A very well done and well filmed version of a not-great concept. To even find out if you have the right box requires taking it out, finding a place to put it, or in this case, pulling out the tray, and putting the case down and opening the lid, praying that it never gets knocked over. Then you still need overflow storage for larger quantities of common items. If they were drawers, it would be one step- open drawer, select item.
I label them. That's how I know which one to grab. And drawers aren't really conducive to transporting to different jobs. If this solution doesn't work for you, that doesn't mean it's universally bad. Not everything is designed specifically for you.
@@WesleyTreat Not universally bad, just not optimal, IMO. It would be interesting to see it in use after four years- still happy with the set up? Again- great job on the video.
@@jaywood8296 Yes, thank you, I'm very happy with it. I think what you mean to say is it's not optimal for the way you work. No solution is optimal for everyone, but may be perfect for many others. Thanks! 👍
"Marie Kondo of Fasteners"!!!! Your sense of humor is on point! Though I just found your channel, it's definitely in my top three favorites. Content, quality, craftsmanship...you've got it all nailed!
LOL the Jetson's cyber drive table saw is genius, This is the best rack i have seen for these sorting bins. BTW at least you didn't glue the back on and find out about the backward slide a day later, after the glue dried.
Nicely done. I would add a pair of tongs or tweezers hanging on the side of the cabinet for fishing bits out of those bins quickly. The Jetsons table saw sound edits are hilarious.
Thanks for including the screw up... I do stuff like that all the time... makes me feel better, I'm not the only person who does that....assorted lengths of wiiiire..lol
Wesley this is the best home made sortimo cabinet I've seen on UA-cam. It's been on my to do list for a long time but haven't conquered it yet. I've got like 15 of the harbor freight version of the sortimos sitting in my closet looking for a home. Awesome job.
Hands down the most thought-out and versatile implementation of a DIY Sorta Sortimo/Econo Sortimo rack I've seen. Just watched Adam Savage's video, and like many others knew I wanted to try out the organizers for storing small parts. I'm going to start off with only 1 or 2 organizers and see how I like them. If they work well for me and I need to upgrade to a rack, I'll be basing mine off of yours. The ability to mix and match the shallow and deep organizers is great, and the temporary table and drawers for "Type-A Accesories" really take this to the next level for me. Loved the Futurama reference. Keep up the great work!
Love the table saw sound - wish mine had a setting for that! I probably would have just used a multitool or something and cut the slides out - but your way is definitely the more professional approach. Also love the Farnsworth reference!
"Meet George Jetson!!" I have to admit drooling over Savage's Sortimo racks I had to face the reality that unlike Adam I am not a millionaire that can just go out and buy whatever strikes my fancy. Besides I already had more that 20 of the Stanley cases stored sufficiently on rolling baker's rack selves that I got from Lowes for around $50 each. I would build a cabinet like yours but most of my work in on location so I don't really need that much convenience in the shop. That said, nice build.
Thanks for sharing. Had some good laughs watching this one. Thanks for sharing your mistake, which, in my case, is often a part of the process. A very useful storage solution that I hope I'll be able to make, when I can afford the bins
I absolutely loved the table saw sound. I think the chop saw need a sound. The drill needs a sound too. I subscribed because what you did with the table saw sound really brilliant!
I love the space jig and the new table saw sounds! You have such a great sense of humor! You're also killing it with your sub count, what's your secret? Keep up the great work, I really look forward to your videos
Have a similar rack, mine is not as tall nor as nice. I installed it on the wall with French cleats, you will be amazed at how much you can get in organizers. Just a small tip when using the label maker to label ( I did mine on the yellow part of the handle), 2000 grit sandpaper and a wipe with isopropyl alcohol will make sure your labels are not "self-removing."
Do like that pull out tray to set the boxes on, Great Idea!! I have seen so many videos on storage racks where they use dados or pocket holes,,, On a storage rack that's kept in your wood shop???? Gotta be strong and functional,, ain't gotta be pretty!!!
Awesome work! The Jetson's table saw sound was priceless (as well as the Kondo gag). I built something similar (but not nearly as nice) to keep a storage system in my van. Some advice about putting labels on these cases - even using an industrial labeller (with "permanent" UV stable tape) I still found they peeled off over time. This was fixed by overcoating with epoxy - just make sure it's UV stable non-yellowing!
haha @7:14 i thought to myself "that was symmetrical until now, i wonder if all the drawer slides are facing the correct way"... love the table saw synth btw
I want a table saw just like yours. Seriously, I need the make and model number. I love the Jetson's car sound. Mine just makes a high pitch screeching sound. Your videos are really entertaining, along with seeing the awesome projects you work on. Thank you.
The screeching isn't the issue, leveling the volume is. I love the machine noises but not when I have to keep adjusting the volume controls. Keep up the great videos!
The Jetson's table saw sound made me laugh out-loud uncontrollably each time you used it. Very cool. Your design and video editing skills are superb. Thanks for sharing.
Hey Wesley, this video came out just in time for me. I have seen other videos on rack systems that weren't quite as good as this one for what I want to do. I like that pull out shelf and the drawers that you have in there. Also I like the "Space Jig" you made. I got a chuckle out of the sound effects from The Jetsons car. Keep up the good work, looking forward to seeing more videos.
whoaaaaaa.... SO great. I 😍love 😻 the temporary placement tray! Right now I balance my stanley organizers on my knee and then every 4 months one tips over off my knee and I lose my mind. 🤯
Professor Farnsworth would be proud of your wire drawer.
I, however, can just say: "Whoa!"
Brilliant - best design - a horizontal pull out shelf at optimal height. No need to build a sliding drawer for every case. A+++
I cannot thank you enough for including your mistakes. You will positively affect my mood and actions the next time I screw up. Which should be any minute now. Seriously, thank you.
I personally love your sense of humor
Your dedication to piss off that commenter is spectacular. Great video.
It sure makes you miss the real sound of that saw.
Jetsons!
@@hawkie333 Thank You! Jetsons. I was racking my brain trying to remember which show that sound was from. LoL.
Now I'm tempted to say that "your drills also sound annoying - why don't you do something about it?", and see what he comes up with :D That table saw comical beeping was golden! :D
I've never laughed so hard at a table saw before...
Dang! I gotta have one of those "Spacely" table saws!!!
I think they sell an upgrade Widget.
I wondered when the Jetsons car sound came into play.
Things guaranteed to make me smile...the first slice of a brisket, my dog, and a new Wesley Treat upload.
Now that’s a functional design that addresses all those design considerations like: 1) where to put container 2) where to leave container now that you’ve taken out a “section” 3) how to close container now that you’re holding a section (and drill and washers and pencil....) and 4) how to annoy at every opportunity some doofus complaining about noise they are choosing to receive on their very own device rather than reading manual which probably indicates where volume switches are....!!!
Ha, wet myself laughing every time!!
Seriously good editing and a seriously good mistake that we’ve all sort of made.
Thanks very much for all that work and for seriously thinking thru the limitations of working with these great containers...
Wesley is the ThisOldTony of wood. Absolutely tremendous.
I love your sense of humor. I always get a laugh from your videos. I'm glad to see a pro put the drawer slides on backward. Makes feel less like an idiot.
I took your advice and rewound it three times. Frankly, I'm shocked and dismayed that a professional of your caliber would make the same exact mistake three times.
ha! classic!
That's consistency.
Wow. Great project. Attention to detail is incredible. You make it look so easy. I saw the same "improvement" needed in the Savage video but instead of a tray, I only installed drawers in mine. Your tray solution is way more elegant and useful. There are many of these "Sortimo" videos on YT but your design is the best. Bravo! : )
The only thing I don't like about you vids, are the people that try to tell you what's wrong with them. I love the content, and the humor, and also how you screw up once in a while to make us feel better. I'm sure this is difficult for you to do. I love the little tricks I see and don't feel bad at all about stealing them and making them part of my tool bag. Thank you!
We all make really stupid shop mistakes though not everybody is willing to admit. Glad you shared. Look at it this way way ... the good news you hadn't GLUED and screwed the back on.
Absolutely love the Jetson table saw sound. George Jetson wasn't much of a woodworker - her was too concerned to hurt his button pressing finger. Subscribed .
Thank you for showing your mistakes. It helps.
UA-cam suggested one of your videos to me today, and I'm about 4 videos in and subscribed. Your channel is a little Jimmy Diresta, a little This Old Tony, and a lot original. I dig it.
Man, the quality of your videos/content is through the roof!
Love the sarcasm, really enjoyed this sartimo organization build video! Wish you had more woodworking and shop projects like this! More pls
Ok, now I want cool custom sounds for every tool. Too fun!
A very well done and well filmed version of a not-great concept. To even find out if you have the right box requires taking it out, finding a place to put it, or in this case, pulling out the tray, and putting the case down and opening the lid, praying that it never gets knocked over. Then you still need overflow storage for larger quantities of common items. If they were drawers, it would be one step- open drawer, select item.
I label them. That's how I know which one to grab. And drawers aren't really conducive to transporting to different jobs. If this solution doesn't work for you, that doesn't mean it's universally bad. Not everything is designed specifically for you.
@@WesleyTreat Not universally bad, just not optimal, IMO. It would be interesting to see it in use after four years- still happy with the set up? Again- great job on the video.
@@jaywood8296 Yes, thank you, I'm very happy with it. I think what you mean to say is it's not optimal for the way you work. No solution is optimal for everyone, but may be perfect for many others. Thanks! 👍
Love the Jetsons table saw.
Another great video. I off to the park to complain about the children's laughter.
People complain about your table saw sound, so you make it sound totally weird... I love it.
"Marie Kondo of Fasteners"!!!! Your sense of humor is on point! Though I just found your channel, it's definitely in my top three favorites. Content, quality, craftsmanship...you've got it all nailed!
Thumbs up for the OCD wire scrap collection. Glad I’m not the only one.
I feel ya on the backwards hinges.....been similar places myself a lot.
I love the Jetson's saw noise. :)
LOL the Jetson's cyber drive table saw is genius, This is the best rack i have seen for these sorting bins. BTW at least you didn't glue the back on and find out about the backward slide a day later, after the glue dried.
Man, the upgraded sound of your saw has me in stitches.
You inspierd me to organize my lifelong collection of screws, nails, nuts, whashers and whatnot, AND MAAAAN IT FEELS AMAZING
That table saw sounds absolutely riveting!
Just found you video here for first time. Love your sense of humor along with a quality video presentation. Keep up the good work! Thanks for sharing.
The new saw sound is great - pondering the drill and other Jetson sounds you could come up with - LOL
Nicely done. I would add a pair of tongs or tweezers hanging on the side of the cabinet for fishing bits out of those bins quickly.
The Jetsons table saw sound edits are hilarious.
I have plans to add some accessories. Maybe a tube for rulers, a slot for my binder with notes, and a square of sheet metal for magnetic trays.
Thanks for including the screw up... I do stuff like that all the time... makes me feel better, I'm not the only person who does that....assorted lengths of wiiiire..lol
Who needs Kreg's jig when you got Wesley's Space Jig. 😎
I loved your solution to the saw squeal issue!......lol And the project is great too.
Woah! The beginning of the table saw bit! Amazing!!
I giggled every freaking time you powered up that table saw.
Oh, and that middle slide out shelf is nothing short of genius.
That thing is beatiful and the temporary board is a great idea
Wesley this is the best home made sortimo cabinet I've seen on UA-cam. It's been on my to do list for a long time but haven't conquered it yet. I've got like 15 of the harbor freight version of the sortimos sitting in my closet looking for a home. Awesome job.
Man. This guy has it down. Yes, skill in the workshop, but also just the right blend of camera presence, editing and humor. Subbed.
Hands down the most thought-out and versatile implementation of a DIY Sorta Sortimo/Econo Sortimo rack I've seen. Just watched Adam Savage's video, and like many others knew I wanted to try out the organizers for storing small parts. I'm going to start off with only 1 or 2 organizers and see how I like them. If they work well for me and I need to upgrade to a rack, I'll be basing mine off of yours. The ability to mix and match the shallow and deep organizers is great, and the temporary table and drawers for "Type-A Accesories" really take this to the next level for me. Loved the Futurama reference. Keep up the great work!
Just love this mans sense of humour, liked and subscribed......... Ray H ( From England U.K.)
6:27 i need that gadget in my life. I wish I had it last year. the flex bit extension was much harder to work with. Your videos are very entertaining!
Adam Savage, Sortimo, entertaining construction, and "oh yeah?! Jetsons!"...subscribed. Well played sir, we'll played.
Awesome build. Thanks for showing your mistakes...we all do it. And I love your table saw noises...keep those for sure!
Now that is just the kind of arrangement I need but without the wheels... very nice build mate.
Man I’ve seen several of these builds this on is by far the best. 👍
Well built and very well thought out and practical
Neat project. Especially like the tray for access to the contents of the storage boxes. Thanks. Cheers, David.
Mate that was a joy to behold. Great comedy too.
Love the table saw sound - wish mine had a setting for that!
I probably would have just used a multitool or something and cut the slides out - but your way is definitely the more professional approach.
Also love the Farnsworth reference!
How have I missed your page for the last many years. Such a great find.
"Meet George Jetson!!"
I have to admit drooling over Savage's Sortimo racks I had to face the reality that unlike Adam I am not a millionaire that can just go out and buy whatever strikes my fancy. Besides I already had more that 20 of the Stanley cases stored sufficiently on rolling baker's rack selves that I got from Lowes for around $50 each. I would build a cabinet like yours but most of my work in on location so I don't really need that much convenience in the shop.
That said, nice build.
Best table saw sound EVER!!!
I think new table saw sound effect is superb.
LOL - Various lengths of wire, and a spaceship you are a Futuristic guy.
Slick design! One of these days I'll move all my assorted stuff out of plastic bins and old coffee cans which in itself was a move forward.
I chuckled far too much at the space jig gag. Damn you and your great sense of humour!
I'm with Marcel, please rethink your other tools! Sweet!
I wish my table saw sounded like a Jetson car!!!
I laughed out loud at the table saw.
Like, every time.
This is a cool build! Thanks for sharing!
Thanks for sharing. Had some good laughs watching this one. Thanks for sharing your mistake, which, in my case, is often a part of the process. A very useful storage solution that I hope I'll be able to make, when I can afford the bins
I’ve learnt something today. Pay attention to the direction of drawer slides.
Awesome build. Love the jetson flying car sound for the saw. Bravo.
I absolutely loved the table saw sound. I think the chop saw need a sound. The drill needs a sound too. I subscribed because what you did with the table saw sound really brilliant!
Those long clamps are awesome!
I love the space jig and the new table saw sounds! You have such a great sense of humor! You're also killing it with your sub count, what's your secret? Keep up the great work, I really look forward to your videos
Awesome storage unit... totally jelly.
Have a similar rack, mine is not as tall nor as nice. I installed it on the wall with French cleats, you will be amazed at how much you can get in organizers. Just a small tip when using the label maker to label ( I did mine on the yellow part of the handle), 2000 grit sandpaper and a wipe with isopropyl alcohol will make sure your labels are not "self-removing."
I love your Futurama references
A place for everything, and everything in its place.
I love the drawer/tray for opening the cases on. I’m going to have to add that to my new rack I’m building shortly.
Love this. The table saw sound replacement to the ufo is sick.
Do like that pull out tray to set the boxes on, Great Idea!! I have seen so many videos on storage racks where they use dados or pocket holes,,, On a storage rack that's kept in your wood shop???? Gotta be strong and functional,, ain't gotta be pretty!!!
One helluva good job!, you mastered it!.
Fust time I found one of your videos. Very well done and you get a thumbs up for the Jetsons Sound effects and the great video!
Awesome work! The Jetson's table saw sound was priceless (as well as the Kondo gag). I built something similar (but not nearly as nice) to keep a storage system in my van. Some advice about putting labels on these cases - even using an industrial labeller (with "permanent" UV stable tape) I still found they peeled off over time. This was fixed by overcoating with epoxy - just make sure it's UV stable non-yellowing!
haha @7:14 i thought to myself "that was symmetrical until now, i wonder if all the drawer slides are facing the correct way"... love the table saw synth btw
Marvelous Futurama reference Professor!
Another great project! Loved the editing also.
That is awesome! Dig the table saw with midi trigger... lol
I want a table saw just like yours. Seriously, I need the make and model number. I love the Jetson's car sound. Mine just makes a high pitch screeching sound.
Your videos are really entertaining, along with seeing the awesome projects you work on. Thank you.
Cool setup. The saw sounds alot better !! LOL
Awesome design! I will build this once I finish my wood working shop!
The screeching isn't the issue, leveling the volume is. I love the machine noises but not when I have to keep adjusting the volume controls. Keep up the great videos!
I adjust the levels so they sound good on my end. Nothing more I can do.
Darn - a little late to the game, but I have to say, I LOVE the "Forbidden Planet" vibes of that table saw!
That Jetsons sound should be a feature on ALL table saws!! lol
those are my go to parts cases.
Just found your videos.the knob making was the first. Trying to catch up. But i gotta work. Lol. Great videos Great talent....
Excellent alternative to Sortimo Wesley! Thanks for making this video for us!
Getting caught up on your videos Wesley. Really nice design. The tray to put cases on is such a good idea!
instaBlaster.
The Jetson's table saw sound made me laugh out-loud uncontrollably each time you used it. Very cool. Your design and video editing skills are superb. Thanks for sharing.
Looks like it brings you joy
Best design I have seen. Thanks for sharing.
Hey Wesley, this video came out just in time for me. I have seen other videos on rack systems that weren't quite as good as this one for what I want to do. I like that pull out shelf and the drawers that you have in there. Also I like the "Space Jig" you made. I got a chuckle out of the sound effects from The Jetsons car. Keep up the good work, looking forward to seeing more videos.
whoaaaaaa.... SO great. I 😍love 😻 the temporary placement tray! Right now I balance my stanley organizers on my knee and then every 4 months one tips over off my knee and I lose my mind. 🤯
I love the table saw sound effect, it sounds like the Jetsons' flying car.