Volvo Trucks - Common-Rail Fuel System
Вставка
- Опубліковано 28 бер 2016
- Volvo Trucks’ 2017 family of D11 and D13 engines features a common-rail fuel injection system. The common-rail provides a more efficient burn, reduced noise and greater fuel efficiency and overall reliability.
www.volvotrucks.us - Авто та транспорт
i have 01 d12 with 1.755.000 miles running 3000 miles average week and in last 7 years i replaced only 1 injector and who knows how may gallons of oil change :) im very happy with it
god bless VOLVO
Volvo Durability 👌👍👍👍👍
16سے25تک پسٹن نبمر
@@100pyattpp
Scania's are the best trucks, which surprised me, I thought Mercedes or M.A.N. were better. Not so according to a lifetime truck managing director and now trucking consultant whom I've known for 52 years.
Volvo, is a very good and powerful truck, a very extraordinary engine
greetings from Indonesian truck lovers
J'aime Volvo ainsi que ce qu'ils font
Bravo à toute l'équipe SMT GROUP
멋진 엔진 입니다.
The Volvo.. I like the Heavy tech of Volvo projects....
Commen rail Process... thats good process of provide proper fuel capacity to per cylinders...i like it...
Volvo melhor marca de caminhão do mundo
I love volvo. Full of very strong energy. I still keep the N12 volvo truck in indonesia.
Halo
Nek aku milih Hino ae, tenogone badak, onderdil e melimpah ruah tur murah
I'm enjoying watching your good video.
I support you in Korea.
I like volvo truck engineering, very smart engine.
Me Gusta la Mec. Moderna, me Gusta aprender Y Saber las Cosas.
رائع جداً يا مهندس
Super bro
Thank for the video 🌄🌍🎆🌳🏝🎈🎈🎈
Very Nice this vídeo l love so conglatulation!
VOLVO 👍👍👍👍👍👍
Yes se ve Padrísimo 👍
BEL VIDEO IL COMMON RAIL E IL MIO MESTIERE
Tambah ilmu buat saya mksh byk
Buenos consejos
Aapke video Ham Apne channel per upload karna chahte hain kya permission hai mil sakti hai
Buenas noches espero se encuentre bien sus vídeos son muy técnico felicitaciones por favor que sean en español teneme en cuenta en sus vídeos de reparación de sus motores muchas gracias Guillermo León Mejía Tapias Colombia hasta pronto
Tnx vedio
300Mph BUS👍
great👍👍
Belo vídeo interessante perfeito 👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷
If it would
Very good
thank volvo
Super sir
Very very nice vedio
CRDI I LIKE IT
Why are three of the injectors camshaft operated but the other three not?
More torque will be produced and more balanced will be there if two similar motion piston fires at the same time, not sequentially
more torque will be produced, but fuel consumption is literally doubled 😕
👍👍👍
I run the car maintenance UA-cam channel in Korea. I'm always learning such a great ideas on your channel. I hope we have a chance to be together. Thank you.
Ok
Pantek
Me too l am Rwandan l need to know more about Hyundai and l wand to be in Spares for Hyundai and used Hyundai will you join ? Call me +250788752394 WhatsApp thank you
Ok
AH YES yellow and blue
The program allows me to explain it
I just wonder the sense of putting one cylinder head for the entire big 6 cyl. diesel, gasket issues? Piston damages occurs now and then = much easier to repair if each cylinder has it's own head.
While it is not a bad idea, there are several reasons to have one head. Apart from what you said of gasket issues, there is also the benefit of overall needing a bit less material and being overall stronger as one unit, and say being less complex and expensive because of what binders would need to be manufactured. Another manufacturing challenge that comes there is the added time to cast six small heads instead of one, and the tolerances that will be more strict for fitting the other moving parts.
To summarize why have one head, it is because you get better strength; reliability and way lower costs, but I say it would be possible and very cool if done correctly.
I hope it helps you understand.
@@domesticwingman389 For humans one head is better than multiple :) , but heavy truck engine. I somehow understand the strenght issue but the long term dependability, this is the question. Also, it is easier to manufacture and handle single heads. What about the other truck makers, do they find this a good option? I have to admit, I've been off from this business for decades. Best wishes..
I get your point. But I think it has something to do with the flow of coolant. At least that’s from what I have read.
@@SupahEXPE00, Easy to arrange with a coolant collecting mainifold. I think this is a weight issue: One can make the engine a few kilos lighter without losing strenght.
N14 had 3 heads . One per every 2 cylinders.
Can I ask a question, please
No
Good sir
Sir ji both the pistons go upwards together then which of the two pistons do which work inlet,compress,power,aukjhaust
أنه الاختراع الغربي عقول ذكية جدا
Before 2017 the injectors would get 70psi fuel and the special cam would press on them to make the 30 000 psi. Basically each injector was its own fuel pump. Thi system is know to last a million miles before injectors need replacement. Also, if one fails, the other five would allow you to keep driving to the next truck shop. Common rail has a single high pressure pump. If that fails thats it. Tow truck... just look at the cummins isx notorious fuel pump issues
A lot of the earlier isx's were unit injector and they were junk
Most powerful eingen
D13 engine rpm problem I have change the fuel pump but not working
Which particles break your lateral attitude
Nice
Super
powar
Emission-free transportation technologies have been available for mass production for over 25 years, but without the needed infrastructure. Cars - affordable for the general public - with engines of about 1 litre fuel consumption, or cars with real water-using engines have been ready for production for over 2 decades now. These high-tech prototypes were successfully tested in countries like Canada, USA, Australia, Norway, England, Sweden, Finland, Belgium, Holland, Denmark, Germany, Poland, France, Switzerland, Czech Republic, Austria, Italy, Israel, China, India, South Korea and Japan. We should already be manufacturing 35-40 million emission-free vehicles annually, and H2O engine systems should have been producing energy instead of our fossil-based and nuclear power plants. Entire technological documentations of such technologies have vanished in the EU`s Institute for Innovation and Technology, and, according to the legislation in order, it is right to be so. The expense involved in the production of such technologies is half of that of the traditional engines, they weigh about 70% less, and they can provide a huge torque. Their working range can be several thousand miles, cars could weigh 200 kg less, and their price could be 3-4000 Euros less. Segments of nearly the entire car industry secretly have the prototypes and successful tests. At the present moment we are poisoning our environment just out of mere arrogance and greed. We live in a cheap and indecent world. I firmly claim that we simply shouldn`t lie to 7 billion people, and this is only the tip of the iceberg. This information is entirely true and I hold myself accountable for its validity.
Sincerely, Istvan Gazso, inventor
What is the cuz of white smoke of Volvo diesel engine? During operation?
Is cois common rail fuel injection system always a DIRECT INJECTION?
My vovlo truck fmx 400 is not going up from 7 rpm and not moving please guide me
Very nic
Is that the same principle as the Cummins diesels?
Good
Cummins, the boss...
Cummins M11 , ISM 11 ❤
Чёт я не понял, как так без внешнего насоса? А что тогда давление создаёт?
Injeção. Moderna.
I have got volvo d13 f engine ,but now the problem started suddenly it starts nicely,but it mixes diesel into engine oil ,how can i rectify this problem help me
I will help u
Deutz family engine BF6M 2015
Hi
Supar videos
Nice sales pitch, but does nothing for techs. Yes Tech Tools is great, but could you provide something with more detail or a service manual link? I agree. I'd rather do a starter or any repair on a Volvo v/s an International. Their engineers did a great job of cutting down service times.
CAT
Shut up
The VOLVO & other vehicles wheels are manufactured in INDIA, KARNATAKA (st), MYSORE 'AUTO MOTIVE AXLE' Limited. I'm working on this factory.
great job
Fuel data Volvo FH 460
অনেক সুন্দর পোস্ট
The engine with 3 injectors pump is D11 the D13 & D16 are 6 injectors pump.
Ab VOLVO Sweden POWER How about the D12? Is it common rail too?
@@willmann30 no that is a unit
The injector is not supplying but asg is coming out from the tank
who's country was produced it ?
For trucks, Sweden.
👍👍👍👍👍👍👍👍👍
ល្អgood
Hola ING ayudeme con la calibración de un motor Volvo de 06 cilindros mil gracias soy de Ecuador
Good while new, then replacement only with new ones - the manufacturer is not part of the part for injector regeneration.
Dobre póki nowe, a potem wymiana tylko na nowe - producent nie udostępnia części do regeneracji wtryskiwaczy.
جميل
Detroit is king
Detroit series 60 12.7 ❤
Volvo engine best for truck and car
No. Best in boats and wheeloaders
Like a common rail and MEUI had some kind of a bastard child. Anyone know if flow rates are still on them or not?
Es mañana es hoy. 🎉🎉🎉🎉🎉
Interesting
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
when driving in jersey make sure you say volvo like balbo
👍
💞💞💞💞
Irgendwie stimmt die Zündfolge nicht. Da fehlen auf manchen Zylindern einfach die Einspritzung.....
Please am having problem with my gas system Volvo FM7 290 truck
Is this a 6 stroke engine?
4 stroke 6 cylinder engine
Someone could tell me how much pressure have the fuel sistem??
PerFoxX close to 35000 psi injection pressure......
gagan Bajwa ovejamolestosa
Common Rail Direction Engine System
What is cuz. The white moke of Volvo desiel engine
У меня на мапеде такой движок стоит
Chẳng có gì khó hiểu 🎏.th ư tử nó của đồng cô 6xy lạnh.cach chỉnh cảm co su pap.tui là OK .
Please i need help on my gas system Volvo FM7 290
FM 400 ka safed dhua Dene ka Karan kya hai
Volvo engine is earth push up
CC KETE NA KA. ..
new machine sir
JAYANTA DAS
Hindi👈✏️👈✓
Ji bhai
I want job in valvo as a technician iam 55 age
I am Retaird P.N Dockyard
start tomorrow.
João Pedro Soares
Wrong firing sequence 153624😊
Форсунки под клапаной крышкой😂😂
Ну ну вольво инжиниринг!