Thanku for your sugestion,I watched the video but I think that since my main job is shading, I think she has a very weak engine. I need a machine with a thin pen but a powerful motor.
I understand the motor for Lola Air is little weak, but you do not need a powerful Motor for PMU, you can run little higher voltage like 8 Volts 8.5 Volts on Lola Air, At the end of my video to show you the shading with stroke length and voltage, if you like the more powerful motor Flux Mini fixed 3.0 stroke length $799USD, don't forget to get a extra battery, No machine is the best machine, as long as you know how and when to use it. Hope that help.
Performing hair strokes with a nano machine requires a lot of knowledge and skill; it’s one of the most challenging techniques. I can only advise using low voltage, around a 2.8 mm stroke length, and very slow hand movements. Realizar trazos de cabello con una máquina nano requiere mucho conocimiento y habilidad; es una de las técnicas más desafiantes. Solo puedo aconsejar usar un voltaje bajo, una longitud de trazo de aproximadamente 2.8 mm y movimientos de mano muy lentos.
@@ViviAnaapibella Acabo de revisar la máquina Mini Diva PMU, no puedo encontrar la longitud de la carrera en su sitio web. ¿2 voltios para empezar? Nunca he probado 2 voltios, así que no puedo decirte. El voltaje más bajo que he usado es 4 voltios. Lo siento, no tengo esta máquina y no te puedo decir si me gusta o no. Espero que esto te ayude.
I prefer using the Lola Air for nano machine hair strokes. I have extensive knowledge and three years of practice with the nano machine. I’ve also taken some classes, but a lot of the information I found was inaccurate, so I ended up figuring things out on my own. Sometimes, I even had to look for tips from tattoo artists. I’ve considered teaching nano techniques in my class, but most clients' skin isn’t suitable for nano alone. I usually combine microblading with nano machine hair strokes. I recommend using a low voltage, around 4V, with a 2.8 mm stroke length and very slow hand movements. Hope that help
Hi, im on a research for pmu machine. I read that this machine is a bit weak for shading, and your suggestion on using higher voltage. What other machine would you suggest for good performance on strokes and shading? Thank you!
Hello. this Lola Air the machine is very weak, I like to use it for Nano Machine Hair stroke, I use Mast P60 or Mask Y22 for shading. Mast Tour 3.5 mm stroke when I use 3RL for shading. One machine is not enough, depend on your customer skin. May I ask you a question, which machine do you have now? Hope that hope!!!
Thanks for your reply! So, I can work for hair stroke technique and aquarelle lips with Lola, and for brows shading and powder, I can work with mast p60, or Y22? I work with biotek pratika machine and also with Freya pen-critical atomX. Unfortunately I can't seem to find the characteristics of neither of them. You know these two machines?
@@ΜΑΡΙΑΠΑΡΑΣΚΕΥΟΠΟΥΛΟΥ-κ8γ I do not have these two machine, These should be very good quality, I will say these two machine should be good for shading. I only can tell you I try Lola for hair stroke, that work fine to me. for the lips, depend of the inner or outer area of lips, it is a lot of technique and detail... hope that help
Thank you, I just check Artyst Hn1 and never try, But this Lola Air Pro can go as low as 3V, very good for Nano Machine Hair Stroke, So Many Advance PMU Artist are using flux Mini Tattoo machine, 2.5 mm and 3.0 mm. I already have Two Flux 2.3mm and 4.5 mm stroke, so my next one should be Flux Mini 3.0mm. I m thinking to try Bella as well!!
Hi,I bought mast p20 why is it the needle doesn't work back and forth? What's the problm of that machine? Hope you notice my question. Thanks in advance 😊
Hi Hausofsuvana, I have Mast P20 thats working fine for me, do you use the correct needles (the needle universals cartridge), and did the needles cartridge install correctly, well you can create a video on youtube and send me the link to me so I can check for you.
@@Loladanu sorry to hear that, I have so many Mast Machine, but all working fine.or you can record a video upload to youtube and send me the video link. you don't need to show your face. Before you return and exchange the machine.
Hi Thank you for watching. Lola Air Pro the Motor is little weak, but Mast so far they don't have Adjustable Stroke on Smaller Pen, I tested it is very good for PMU Lining work, example Nano Machine Hair Stroke, for shading you may need run little higher voltage. I can't need say which one is better, Depends on want you are going to use for. I own so many machine, I m still switch to use it. I m thinking flux mini 2.5 mm and 3.0 mm Stroke length, I m using 3.0 Stroke length the most! Hope that can help.
Дуже інформативний огляд! Дякую)
Thanku for your sugestion,I watched the video but I think that since my main job is shading, I think she has a very weak engine. I need a machine with a thin pen but a powerful motor.
I understand the motor for Lola Air is little weak, but you do not need a powerful Motor for PMU, you can run little higher voltage like 8 Volts 8.5 Volts on Lola Air, At the end of my video to show you the shading with stroke length and voltage, if you like the more powerful motor Flux Mini fixed 3.0 stroke length $799USD, don't forget to get a extra battery, No machine is the best machine, as long as you know how and when to use it. Hope that help.
Hola, en que potencia y stroke seria mejor trabajar la lola air pro oaea cejas hair stroke?
Performing hair strokes with a nano machine requires a lot of knowledge and skill; it’s one of the most challenging techniques. I can only advise using low voltage, around a 2.8 mm stroke length, and very slow hand movements. Realizar trazos de cabello con una máquina nano requiere mucho conocimiento y habilidad; es una de las técnicas más desafiantes. Solo puedo aconsejar usar un voltaje bajo, una longitud de trazo de aproximadamente 2.8 mm y movimientos de mano muy lentos.
@@MarriedwithPMU muchas gracias, ahora se que hay una nueva maquina , la Mini Diva de popu, de 2volts potencia minima.
@@ViviAnaapibella Acabo de revisar la máquina Mini Diva PMU, no puedo encontrar la longitud de la carrera en su sitio web. ¿2 voltios para empezar? Nunca he probado 2 voltios, así que no puedo decirte. El voltaje más bajo que he usado es 4 voltios. Lo siento, no tengo esta máquina y no te puedo decir si me gusta o no. Espero que esto te ayude.
Hi,what machine is best for nano hair strokes? Thank you
I prefer using the Lola Air for nano machine hair strokes. I have extensive knowledge and three years of practice with the nano machine. I’ve also taken some classes, but a lot of the information I found was inaccurate, so I ended up figuring things out on my own. Sometimes, I even had to look for tips from tattoo artists. I’ve considered teaching nano techniques in my class, but most clients' skin isn’t suitable for nano alone. I usually combine microblading with nano machine hair strokes. I recommend using a low voltage, around 4V, with a 2.8 mm stroke length and very slow hand movements. Hope that help
Thank you for response x
Hi, im on a research for pmu machine. I read that this machine is a bit weak for shading, and your suggestion on using higher voltage. What other machine would you suggest for good performance on strokes and shading?
Thank you!
Hello. this Lola Air the machine is very weak, I like to use it for Nano Machine Hair stroke, I use Mast P60 or Mask Y22 for shading. Mast Tour 3.5 mm stroke when I use 3RL for shading. One machine is not enough, depend on your customer skin. May I ask you a question, which machine do you have now? Hope that hope!!!
Thanks for your reply!
So, I can work for hair stroke technique and aquarelle lips with Lola, and for brows shading and powder, I can work with mast p60, or Y22?
I work with biotek pratika machine and also with Freya pen-critical atomX. Unfortunately I can't seem to find the characteristics of neither of them. You know these two machines?
@@ΜΑΡΙΑΠΑΡΑΣΚΕΥΟΠΟΥΛΟΥ-κ8γ I do not have these two machine, These should be very good quality, I will say these two machine should be good for shading. I only can tell you I try Lola for hair stroke, that work fine to me. for the lips, depend of the inner or outer area of lips, it is a lot of technique and detail... hope that help
Thank for sharing. What do you think about Artyst Hn1 and power babe hn2
Thank you, I just check Artyst Hn1 and never try, But this Lola Air Pro can go as low as 3V, very good for Nano Machine Hair Stroke, So Many Advance PMU Artist are using flux Mini Tattoo machine, 2.5 mm and 3.0 mm. I already have Two Flux 2.3mm and 4.5 mm stroke, so my next one should be Flux Mini 3.0mm. I m thinking to try Bella as well!!
Thank you so much for your insightful
@@TuyetTran-wl7jj No problem, I start loving this Lola Air Pro, just need to using little higher volt when you do shading, example 6.5 volts.
Hi,I bought mast p20 why is it the needle doesn't work back and forth? What's the problm of that machine? Hope you notice my question. Thanks in advance 😊
Hi Hausofsuvana, I have Mast P20 thats working fine for me, do you use the correct needles (the needle universals cartridge), and did the needles cartridge install correctly, well you can create a video on youtube and send me the link to me so I can check for you.
@@MarriedwithPMU in the morning still working. Then I tried noontime the needle doesn't bounced back and forth.
@@Loladanu sorry to hear that, I have so many Mast Machine, but all working fine.or you can record a video upload to youtube and send me the video link. you don't need to show your face. Before you return and exchange the machine.
Do you think this one it’s better than Mast machines?
Hi Thank you for watching. Lola Air Pro the Motor is little weak, but Mast so far they don't have Adjustable Stroke on Smaller Pen, I tested it is very good for PMU Lining work, example Nano Machine Hair Stroke, for shading you may need run little higher voltage. I can't need say which one is better, Depends on want you are going to use for. I own so many machine, I m still switch to use it. I m thinking flux mini 2.5 mm and 3.0 mm Stroke length, I m using 3.0 Stroke length the most! Hope that can help.