Thanks for the video. I’ve never used a jig before. I bought all the wood for making my own cornhole boards, but wasn’t sure how to join the 2x4’s to the 1/2” plywood. (A couple videos I watched the 2 gentlemen drilled straight through the 1/2” plywood and joined the 2x4’s and countersinking the decking screws. I thought “There has to be a more professional way to attach the plywood to the 2x4’s, not have screws visible, and potentially snag the bean bags during expansion or contraction of the wood. I bought a few extra 2x4x8’s to experiment/screw up. I’ll be watching your video several times during the process. Thanks again!
It’s a 50/50 chance. Although I think since it’s a little rustic it would look fine with a crack and add character . I have built some things this way even an apron and it was ok. What you can do for the apron is after drilling the hole for the pocket hole get a little bigger size drill and drill on the holes on the apron making it slightly bigger on the apron side which gives it some room for movement. I hope that makes sense. God bless .
What setting did you use for the 1 1/2" wood? The booklet states 1 1/2" slide and 1 1/2" drill bit slide. But that wouldn't even be on the board but starts before it and the stopping point is before the outside wall?
Let's watch another video:
ua-cam.com/video/qkHy4mvKR9Q/v-deo.html
ua-cam.com/video/Ck4i189bVE8/v-deo.html
ua-cam.com/video/AbWgWF-f_hU/v-deo.html
ua-cam.com/video/-8ItDK-aaUY/v-deo.html
ua-cam.com/video/YsFMwb-4BQc/v-deo.html
ua-cam.com/video/bN3uXlQLB0I/v-deo.html
Thanks for the video. I’ve never used a jig before. I bought all the wood for making my own cornhole boards, but wasn’t sure how to join the 2x4’s to the 1/2” plywood. (A couple videos I watched the 2 gentlemen drilled straight through the 1/2” plywood and joined the 2x4’s and countersinking the decking screws. I thought “There has to be a more professional way to attach the plywood to the 2x4’s, not have screws visible, and potentially snag the bean bags during expansion or contraction of the wood.
I bought a few extra 2x4x8’s to experiment/screw up. I’ll be watching your video several times during the process. Thanks again!
Undoubtedly, marvelous masterpiece made by master craftsman. Thanks
謝謝,詳細的解說
Tks Bác Toàn đã tặng 🥰
🥰🥰
Very nice
Maravilhoso trabalho de um Gênio...🇧🇷🇧🇷🇧🇷👍👍👍🤗🤗🤗😷😷😷😷Parabéns e Deus abençoe...
Thank you so much!
Nice little table 👌
Awesome!
Thank you! Cheers!
Well I have to try your method. You make it look as easy as eating Cake.....
Hope you enjoy
Great job and beutyful table brother
Thanks for visiting 😊😊
Dude. Heck yea. I like. Great video.
Thank you so much!
What’s the lumber list that you used?
@@justinmccallum1 I use pine
- Legs: 6x6cm, 4 pieces
- Cross bar: 3x6cm, 4 pieces
- Table top: 3x12cm, 4 pieces
length x width x height: 60x50x42cm
@@CAT.Creative need more vids brotha!!!!
Thank you for the video.
great job, man
Tks bro
Pocket holing along the apron like that ok? Would the boards not crack from wood movement
It’s a 50/50 chance. Although I think since it’s a little rustic it would look fine with a crack and add character . I have built some things this way even an apron and it was ok. What you can do for the apron is after drilling the hole for the pocket hole get a little bigger size drill and drill on the holes on the apron making it slightly bigger on the apron side which gives it some room for movement. I hope that makes sense. God bless .
I like it, good!
Thank you so much! ❤️❤️
@@CAT.Creative Would you be interested in working with us?
@@zokmokus5211 yep bro
@@CAT.Creative I have sent an email to you.
What setting did you use for the 1 1/2" wood? The booklet states 1 1/2" slide and 1 1/2" drill bit slide. But that wouldn't even be on the board but starts before it and the stopping point is before the outside wall?
Table top should be fashion with Z clips to allow for movement. It will split probably.
What pocket hole jig was you using.
Всё просто замечательно, но почему щит не склеил?
❤️🥰🤟
I like it,
Cool, 🥰
Loved watching.! What is the name of the tool you use to smooth the edges?
it's sand paper wrapped around a piece of scrap wood.
that is a hand planer
Not everything has to be mortise and tenon!
ÖLCÜLERİ NEDİR
At 2:11 this should never happen. You're suppose to clamp the two pieces together.
Hi what wood and varnish did you use?
Pine wood and acrylic PU
what type of wood is it?
It is pine,
Using a pocket hole jib. Simple top. Why all the useless filler, e.g., sanding the wood. Damn people.
There is something called wood glue
The point of the video is to not use glue!!!
You should've been a foley artist, not a woodworker
Wood working skills of a 3 yr old
Comment of a 3 year old