I can affirm that result, I have been using this setup for years Also using Siege on 669 castles results in 181 wounded, when using 1K layers with 1 Mil t14 siege and the rest t13 siege
@@cryptosovereign Monarch Gear surely doesn’t hurt, but It’s not necessary It really depends on your marchsize and General if you need additional buffs, just give it a try
Has anyone seen that this event evony changed all of the spirit beast seals from marching to attacking? I'm not sure if this really changes anything because i'm not sure what the difference is between marching and attacking buffs.... But weird that they change them with no mention
Well is a big big change, marching buffs thats it just when marching attack and the attack work on all scenarios between defending and attacking, reinforcing etc etc
Layers of 10 for all troops, remainder of your march size with T12 archers only (lead by your archer general). your buffs will kill castles with 40 wounded or less
We use 50 for all, then fill march with t13 archers. A friend and I got a total of 96 wounded on an 836M castle. I was the big player at 5B K40 (no 15). Other was 2.5B K36
Works great for 2800+ range attack buffs. If you're below that, enjoy those wounded until you get there. We have a k41 with 3k buffs, sending 50 in layers only getting 129 wounded.
All layers except siege should be at 50 troops. Siege should be at 15 troops . Than t13 should be maxed. Use rally method not attack,your buff will increase a lot. You should have under 100 wounds in total. I used to do barb without wound since 1 year and half ago,than Derrek posted this on his channel.
Depending on gen I use 100 layers with either t12,13, or 14 archers. This way on your last barb chance you can kill 6 1b barbs at once giving you a total of 15 barbs a day.
I just send 20 troops of everything and max 14s of the required troop type and best gens for such. my preset is made for Cav because thats usually what does best, but if i need archer instead i just swap the gens, 20 the cav 14s abd max the archer, same way if needed ground.
I tried what Genghis came up with and got 580 wounded. Tried a few of the other recommendations in the comments. Nothing came close to the claims made by the poster. Worst was 94,177 wounded (that was the layers of 50 post). My guess is your way works on lower power barbarian cities but not on the 1B cities this video is about.
@@nabeelbhatti767 BDplaysEvony put out a video a few months ago about the same subject. I tried to improve on what the video showed and I did. This is what I send: 200% march, 1 soldier for each T14 type, 1 soldier for T13 ground, 1000 soldiers from each T1 type, 1000 T2 siege, and 100 for everything else except T13 archers. I finish the march with all the T13 archers that will fit. I had weird results if I sent 100 T2 siege. Sometimes I had even fewer wounded and sometimes I had 50k+ wounded.
Layers of 100 and the rest t13 archers I get 193 wounded. Sometimes less depending on troop numbers in the Barb castle
I can affirm that result, I have been using this setup for years
Also using Siege on 669 castles results in 181 wounded, when using 1K layers with 1 Mil t14 siege and the rest t13 siege
Are you using ranged or mixed monarch gear? Also are troop buffs necessary? Thanks in advance.
@@cryptosovereign Monarch Gear surely doesn’t hurt, but It’s not necessary
It really depends on your marchsize and General if you need additional buffs, just give it a try
@@tjhtain my experience using monarch gear and troop buffs doesn’t hurt. Your base buffs are what matters. Higher the better.
Has anyone seen that this event evony changed all of the spirit beast seals from marching to attacking? I'm not sure if this really changes anything because i'm not sure what the difference is between marching and attacking buffs.... But weird that they change them with no mention
I think they just renaned... Also on blazons.
Well is a big big change, marching buffs thats it just when marching attack and the attack work on all scenarios between defending and attacking, reinforcing etc etc
amount in layer depends on your buffs, need to fins out testing
Layers of 10 for all troops, remainder of your march size with T12 archers only (lead by your archer general). your buffs will kill castles with 40 wounded or less
We use 50 for all, then fill march with t13 archers. A friend and I got a total of 96 wounded on an 836M castle. I was the big player at 5B K40 (no 15). Other was 2.5B K36
Works great for 2800+ range attack buffs. If you're below that, enjoy those wounded until you get there. We have a k41 with 3k buffs, sending 50 in layers only getting 129 wounded.
I've been opening 1b with min wounded since 2230 buffs... Like less than 1m power loss now I'm clean open
@@coopcity4979 agreed with this... I tried all arrangements stated in this post in comments.. I got wounded ....my archers buffs are 1560....
layers of 25, siege I only send 1. Usually end up with 30-50 wounded tops, zero siege wounded, 3 minute heal time. Full T13 range
All layers except siege should be at 50 troops. Siege should be at 15 troops . Than t13 should be maxed. Use rally method not attack,your buff will increase a lot. You should have under 100 wounds in total. I used to do barb without wound since 1 year and half ago,than Derrek posted this on his channel.
Depending on gen I use 100 layers with either t12,13, or 14 archers. This way on your last barb chance you can kill 6 1b barbs at once giving you a total of 15 barbs a day.
Our big matches his layers to the barb castle so if the barb castle has 11 in every year he sends 11 and maxed out t13
How do you get the box to pop up in your rally spot, to then choose what amount of layers populate?
hold the button on bottom left
@gamingaddictswithgenghis thanks, I'll try that
Wth when did they add feature to auto pop all layers like that 😮 Cool!
Why send archers with your siege general instead of archer general?
I just send 20 troops of everything and max 14s of the required troop type and best gens for such. my preset is made for Cav because thats usually what does best, but if i need archer instead i just swap the gens, 20 the cav 14s abd max the archer, same way if needed ground.
Layers of 100 for archers t13 only, layers of 10 for siege t13 only.
ty
100 layers with t13 or t12 archers you get less then 200 wounds
Use a bottle, NO wounded
I tried what Genghis came up with and got 580 wounded. Tried a few of the other recommendations in the comments. Nothing came close to the claims made by the poster. Worst was 94,177 wounded (that was the layers of 50 post). My guess is your way works on lower power barbarian cities but not on the 1B cities this video is about.
580 is pretty good...i used to get 9-20k
1B i got only 158 wounds
All 100 and t13
My method puts me at less than 450 wounded. Your method got me 64,671 wounded. I call BS.
What is your method@@kcclark9664
@@nabeelbhatti767 BDplaysEvony put out a video a few months ago about the same subject. I tried to improve on what the video showed and I did. This is what I send: 200% march, 1 soldier for each T14 type, 1 soldier for T13 ground, 1000 soldiers from each T1 type, 1000 T2 siege, and 100 for everything else except T13 archers. I finish the march with all the T13 archers that will fit. I had weird results if I sent 100 T2 siege. Sometimes I had even fewer wounded and sometimes I had 50k+ wounded.
Ramune will give 0 wounded on Barbs
This honestly is easy I open 1b with 56k power loss easily
What are your archer buffs
2800
2300
2300
@@nabeelbhatti767