Fixing P0013 P0014 Variable Valve Timing Camshaft Solenoid Chevy Malibu Cruze HHR Ion G5 G6 2.4l
Вставка
- Опубліковано 10 гру 2024
- Here I am fixing my P0013 and P0014 issue on my 2012 Malibu but is the same process for any 2.4l Ecotec used in the GM lineup.
Tools - amzn.to/3RDKKc4
Tools Continued - amzn.to/3TGssJJ
NEW Amazon Links to Suggested Tools and Car Parts:
Tools - amzn.to/2Sbxjzx
Car Parts and Upgrades - amzn.to/2r7geex
Electrical Tools - amzn.to/2Q611cI
Tactical Gear - amzn.to/2LdXR0Q
To View ALL Lists - amzn.to/2EkFcz9
Please Comment if you think of anything I forgot to add to the lists. Or let me know of things you think should or should not be on the list.
Thank you all so much for your support!!!
If you enjoyed please LIKE, Comment, and Subscribe!!
The fact that you did it with ease and a mechanic tried to charge me almost $400 to fix it. ☺️thank you.
Haha no problem at all 👍
Easy fix did mine to but I still got a warranty for I went to the shop.
How to remove a variable timmeung stlinoid
Those Videos are Only for Ideas.
Well done. No BS, just the facts. I related to the blue shop paper towel and ratchet hand position to keep the torque low.
Code scanner from HF - $32.00
Replacement parts from A->Z - $30.54
Chevy Dealership - Don't even want to think about it!
Thanks Tony!
Haha no problem at all. Glad you saved some money 👍👍👍
thank you for this video 😭
just did this on my grandmas 2010 malibu after the engine light has been on for years. i shit you not, the 0-60 time is like 3 seconds faster now
it has a much more responsive ride
Very educational video. Made it a 25 minute job. Thanks man👍
Thank you for explaining how to get the electrical connecter off.
Thank my guy I just fixed mine on a 2017 equinox your video was A1 watched and did it step by step no issues other than it was raining outside a little lol
Very nice. Glad the video helped. Thanks for watching
The air intake is a little different on the HHR bu this video gave me what I needed to get it swapped. Had P0014 & Traction control lights. New Exhaust cam sensor resolved both. Thanks.
Glad you found it helpful
You replied the sensor, or the solenoid as was done in the video?
This was exactly what I needed. Thank you
Glad you found it helpful!!
Did you replace intake and outtakes??
I just ran in to that problem with my 2016 chevy equinox . Thanks for the video. I
No problem at all 👍
Is it a good idea to just change both?
on my 2012 Buick Verano i am getting P0014 and P228D. replacing the VVT Solenoid will get rid of the P0014 issue?
Usually the scan tool will list them In an order of most important and sometimes giving the first code can in turn fix multiple codes.
Is that Bank 1 or 2?
Yeah i have a 07 Pontiac G6 an it has 3 codes . Poo10 , poo11 poo14
Should I replace both solenoids intake and exhaust . Also wish I could seen how to test for power at them
Yes you should replace both
@@whoreheysilver8664 yeah I did an I also cleaned the other 2 that can cause the code plus was a tad low on oil an after all of that . It's been perfectly fine no issues
So in this video are you changing the intake one or the exhaust one?
Exhaust
I have a 2008 Chevy Colorado 2.9. I got the code p0014. Says exhaust camshaft position timing. Could this be a actuator solenoid? And the only problem my truck is showing is when I first start it sometimes it acts like it doesn’t want to start and when I first drive it while it is cold it wants to bog down for a second around 2000rpm.
Yo get that looked at ASAP. Colorados have only one solenoid on the left side of the engine up near the front. About 40 dollars. Do that first. If that doesn’t help you need timing chain work. And a broken or loose chain will likely damage the engine
Good video. Good advise.
Thank you 👍
should I do this or replacing the cam position snesor? any way to tell? When would you need to replace both solenoids?
CPS is OK, otherwise the car will crank but fair to start.
Very helpful when replacing both Solenoids for code P0013 only. I did have a question, if after replacing the Solenoids and clearing the codes, if the P0013 code returns, what should be the next item to check?
Did it come back?
@@getchasome6230yes it did. Why tho?
My 08 is haulin ass now thanks so much
Glad I could help 👍👍
Thanks for the video man
Thanks for watching
I replaced both solinoids in my 2014 Cruz, but still getting code P0014 B Camshaft position Timing over - Advanced, Bank 1... 😔😔
Do you have any advice about it.. 😔
Same issue. 2012 equinox 2.4. Lost and confused.
@@southwestohiodashcam6838
Problem with the timing belt or cover.
Hi curious. Are both the parts the same. Meaning do i get 2 of the same if i have both codes 0013 0014. Thanks
I believe the 0014 it's the exhaust and the 0013 would be the intake.
@@LuisDiaz-vj3gw Thanks yes i had to get one with the black top and other was gray
The P0014 and P01400 is the same code ?
Wich one is bank 1?
I replaced the exhaust cam solenoid but the check engine light is still on. Code is p0014 B in a 2012 chevy malibu. Not really sure what to do. Also it's been a few days since I replaced it.
i allways remplace on pair intake and exhaust at the same time
My Car still isn’t cranking after changing these, any suggestions??
What should we look at next if this doesn't clear the code? I replaced mine and did an oil change... Still have same code 😥
Timing belt issue
Timing belt issue you may as well want to check the CPS.
So would I need to replace both or just the p0013 and p0014? Cause rhat the codes that my car was tossing up
Most likely not. One code usually causes the other but it's a possibility. But I mean as long as your replacing the one you might as well just do both its fairly inexpensive
Is this part the censor as well cause my dealer said its the censor?
What are the symptoms?
Nice video.
Thanks 👍
Do I need to clear the code with the Scanner Code Reader after replacing this part?
If this fixed it then it should clear on it's own.
Most parts store will have a scan tool and clear the code for you if you want.
Are NAPA brand okay to use for this or do I need to get ACDelco?
Napa brand is just fine
@@TonyTheTechnician Thanks for the quick reply!
@@JoshRange no problem 👍
90% of my parts are Napa. Acdelco are great. You’ll get the 1/100 parts every now and then when it comes to electronics that are bad right out of the box. But Napa is a great place for them with oe style parts at a discount price.
@@shoe_string_r6303 Depending on the parts, some AC Delco parts come from China and are just reboxed.
I have a 2013 chevy equinox and the p0014 code came up. I got an oil change and replaced the solenoids and the code come back up a couple hundred miles later. What else should I try
If the engine is sludgy, it's possible that the screens plugged or the car got low on oil. Or it could be that the timing chain has stretched and the slop is what's confusing the cam position sensor and setting the code.
Thanks!
👍👍👍
What voltage does the harness need to give out to the Vvt
Trying to figure that out my self did you figure it out
Thanks for video
👍
I took mine to a mechanic for these codes and they told me they checked the issue but didnt see a problem. When i do a scan I'm getting the code and my check engine light has come on. What do i do
Ok I replace the both solenoid and try cranking the car and it will crank but won't start what should I do but here a catch my throttle body didn't come with a clamp around it so could that be a problem
Replace CPS
I have a 2011 chevy equinox and bought the solenoids and its still popping the p0014 code
You have to drain your oil first ?
No you do not have to drain the oil 👍
Changing it is a wise idea with this code as well
Are the selenoids color coated ? As in the black is exhaust ?
Pcv valve loction please
I have a 2014 chevy equinox, and got the p0014 code, not the p0013 code. What would I need to replace?
Pretty much the same thing. 14 can be caused by sludge or buildup on the solenoid. I would check the wiring to the solenoids and check the condition of the solenoids
Copy, I really appreciate the help!! Won't be able to check the car until tomorrow though. But would you also know as to a loud rattling noise as well as a P228D code? Cause I havent been able to get a clear answer yet.
No problem. I would start by fixing this issue and then see how the car performs and see if the other code returns. If it does it looks to be fuel pressure related. I.e. the regulator and the voltage to it. Unfortunately that would take further diagnosis. But if that is an issue it could cause excessive fuel and could cause misfires which could cause engine vibration or noise. But it's hard to say what the clunking is without hearing it or knowing when it exactly happens. I'm sorry I couldn't be of more help
Thank you a lot brother, I will address the first problem like you suggest and will update after it runs for awhile.
@@oohoohdeenie4469 sounds good. Hope it all works out well for you
I bought a Malibu for $550 because the mechanic told them this CEL was "the timing going out" turns out it's a $45 solenoid?
Yes but timing guides are a huge issue with the 2.4 around 100k. Stay ahead of the issue and do the chain, guides, tensioner also
Mine are Sorento xm 2.4 where I almost change most of the part still this code appear. p0011 & p0014 Totally surrender !
Anyone have the hard shift issue?
Before the replacement or after?
hard shift. hoping it’s just the timing sensor.
What happens if only half come out
Only half the solenoid?
@@TonyTheTechnician yes
I bought both and still got p0013 code 🤔
Timing chain
Po713
I have same issue(code)
Cause my car is having the same problem