I'm confused what is it your trying to make? To me it looks like its throwing rice around and every now no disrespect Im just wondering what its so post to be doing. If it's a grinder isn't so post to have some stones grinding ontop of each other is a good consept but you need something harder then wood try to stones putting a hole in one with a masonry bit and cut some groves in one or both and try that I think you will get better results just try and get a good hard one. That just my thought. Good luck and thanks for sharing with us😀
Thanks for your valuable opinion. what i thought was that wooden wheel grinders are for de-hulling/husking rice and stone/concreate wheels for grinding cereals to flour. Once again thank you very much for your suggestion and fr watching .
In that case try rubber it could hold the rice and the husks and pull them apart have you ever tryed vocanized rubber. Its heated rubber till its so hard different rubbers have different hardness the right one could work very well plus you can cut channels into the rubber they come already round on the other haft try forming HDPE recycled plastic when it spins one will counter act with the other the rice should go one away from the husks. Well best of luck on endeavor.
The idea shows promise, but it seems like your shroud isn't really working and you can't control the gap between the two plates in a precise manner. I got curious, and found this: ua-cam.com/video/Y4zhZ0ViSL4/v-deo.html It seems like you could do the same, but mount your impeller directly to the grinder instead of using a shaft from the other side. As for feed rate control, you could probably use a sliding door method by putting a small plate flat into the neck of your hopper and pulling it out/pushing it in to control your feed rate. I'm not sure how helpful all this might be, but I wish you the best of luck with your next version.
Its good attempt.But pay attention to input n output.Also make provision to proper feeding,proper adjustment of wheel,proper collection of dry grind to make it more effective.Great!!!! Keep on improving.!!!!!!!!
It is not grinding anything? how anyone can say this is good is crazy I would say this would be best used at a wedding for throwing rice at the bride and groom am I wrong?
so creative. thank you for the video
Great idea. Very helpful in lockdown.
buena idea pero el producto desarrollado es precario e ineficiente
Super 🔔🔔🔔🔔🔔👍
Моя мельница.
Несколько видеороликов по моей авторской мельнице: внешний вид, принцип работы,характеристики.
1:
ua-cam.com/video/1RYGFuY-l7I/v-deo.html
2:
ua-cam.com/video/GwmF8Hlsr_o/v-deo.html
3:
ua-cam.com/video/7777-lKSib4/v-deo.html
Good for small farmer
Hi this is what I was searching for. Could you give the thickness of each wodden circle and the diameter.
Wow need to more upgread
I'm confused what is it your trying to make? To me it looks like its throwing rice around and every now no disrespect Im just wondering what its so post to be doing. If it's a grinder isn't so post to have some stones grinding ontop of each other is a good consept but you need something harder then wood try to stones putting a hole in one with a masonry bit and cut some groves in one or both and try that I think you will get better results just try and get a good hard one. That just my thought. Good luck and thanks for sharing with us😀
Thanks for your valuable opinion. what i thought was that wooden wheel grinders are for de-hulling/husking rice and stone/concreate wheels for grinding cereals to flour. Once again thank you very much for your suggestion and fr watching .
In that case try rubber it could hold the rice and the husks and pull them apart have you ever tryed vocanized rubber. Its heated rubber till its so hard different rubbers have different hardness the right one could work very well plus you can cut channels into the rubber they come already round on the other haft try forming HDPE recycled plastic when it spins one will counter act with the other the rice should go one away from the husks. Well best of luck on endeavor.
Thank you very much bro.
Dont confuse, watch carefully, output is without polish rice. This is gr8 project.
W
Crude!
Kalau ngeflog jabgan terlalu goyang itu hpnya bang....
Orang jadi jenuh...
😬
Kurang mnarik.nggak maksimal
Dimensi
Idea is bast but not sexes matrial use
Vraiment c'est moche ce travail j'ai rien compris ce que vous faites désolé
The idea shows promise, but it seems like your shroud isn't really working and you can't control the gap between the two plates in a precise manner.
I got curious, and found this:
ua-cam.com/video/Y4zhZ0ViSL4/v-deo.html
It seems like you could do the same, but mount your impeller directly to the grinder instead of using a shaft from the other side. As for feed rate control, you could probably use a sliding door method by putting a small plate flat into the neck of your hopper and pulling it out/pushing it in to control your feed rate.
I'm not sure how helpful all this might be, but I wish you the best of luck with your next version.
Thank you sir.
Nice video bro.
Worst idea...
Моя мельница.
Несколько видеороликов по моей авторской мельнице: внешний вид, принцип работы,характеристики.
1:
ua-cam.com/video/1RYGFuY-l7I/v-deo.html
2:
ua-cam.com/video/GwmF8Hlsr_o/v-deo.html
3:
ua-cam.com/video/7777-lKSib4/v-deo.html
😂😂😂😂😂😂😂😂😂just buy one from china😆
Its good attempt.But pay attention to input n output.Also make provision to proper feeding,proper adjustment of wheel,proper collection of dry grind to make it more effective.Great!!!! Keep on improving.!!!!!!!!
It is not grinding anything? how anyone can say this is good is crazy
I would say this would be best used at a wedding for throwing rice at the bride and groom am I wrong?
7:50 it's not for grinding its to knock off the chaff
Thank You for the video and information. I'm not sure if it's the lighting or my old eys, are you makingn white rice from brown rice? again Thank You.
I think those were broken grains
faltu
Wasting time
Rice kitna nikalega 1 hours me
what is this??? what you mean by rice mill? it is not to throw rice.
This is home model not like comersial mills we have better than this . in India
thx u Bos..!
You failed bro .
😮 Я в шоке от такой шарманки😄
The rice was all broken!!
Not dood
Big lol
very interesting and nice job. it's super mini brown rice mill
mesin gak jelas.. asal buat..
First comment, Great Video bro! Really nice
mN
18 m m Hard ply 2440 mm leng tL 1220 mm wide
I create amazing stone flour mills, they make 2 pounds of flour in less than 2 minutes. They cost 350 US
Got pics of it. I would be interested
nice vid.
tek hancor kudo bias ni ana ya
We have better methods in India
This was the ancient method they would use wooden hand grinder. It's very promising modification.
Bad
muito bom abraços valeu
откат нормальный
My
Great idea but I think it would work better with some sort of rubber.
Gr8 project bro. I tried to search without polish rice in market. But failed to find. Thanks for this easy project .