Dang it! Took me an hour to decide on the purchase earlier this morning. I wish I saw this vid before I made purchase and should've added this to list of items I made a purchase of earlier. I wonder if I can still add this to my purchase to save on shipping - since the shipment haven't been picked up by the courier company
@@034motorsport Unfortunately I do not reside within the US and I paid for $35+ on shipping (meaning if I purchase this I have to pay another $35+) plus my responsibility of D&T and conversion to a different currency
Been having these issues for couple weeks now. Replaced cap twice and constantly keeps loosening….def need to order but before I do, is this problem covered under warranty? B9 2018
@@fartampliferthe trouble with the warranty replacement is that it’s bound to fail again, which can potentially be catastrophic when it does. It’s best to resolve the root problem without waiting for it to fail again.
In some instances Audi will warranty the failed part, yes, however the replacement part is bound to fail again in the future, which can cause catastrophic results. For the very low cost on the 034 PCV Breather Hose, it’s best to remove the failure point altogether and make the problem an issue of the past.
@@skibinskibuilt the same principle applies, however with that product its the plate itself on the engine that is the weak point. That is why our catch can kit for that car replaces the entire PCV plate
@@Sinister6_cuv yes this does apply to the EA839 found in the 4M.5 Q7 and Q8, however the 034Motorsport PCV Breather Hose is not yet available for this application. We’re working on finalizing that fitment currently.
@@034motorsportGreat, thanks. Hopefully that will be with a catch can too. Currently using an APR universal, but would love to rip it out and 034 everything. 🎉
This should work on any turbo inlet pipe where the OEM PCV Breather Hose also connects. If you’re still using the OEM PCV, then this kit should work fine for your car.
Instantly bought it once you mentioned 🔥 good enough for me 💳
@@Slow4b9 we appreciate that!
@@034motorsportnahh, we appreciate you
Awesome video! Straight to the point and very informative. Thank you!!!!
Great video.
@@hewantsmoke83 thank you!
Awesome definitely going to get it
Nice work gents! 🙌🏻💪
Dang it! Took me an hour to decide on the purchase earlier this morning. I wish I saw this vid before I made purchase and should've added this to list of items I made a purchase of earlier. I wonder if I can still add this to my purchase to save on shipping - since the shipment haven't been picked up by the courier company
@@BocaAtractivo82 we have free shipping on over $100 in the US, order in peace, no worries 😉
@@034motorsport Unfortunately I do not reside within the US and I paid for $35+ on shipping (meaning if I purchase this I have to pay another $35+) plus my responsibility of D&T and conversion to a different currency
You didn't tell us to clean the PCV valve off first Nick! 😁
You don't like tasting the oil to make sure it's fresh? 😆
Hi just curious. Is it safe to use the catch can kit in extremely cold weather conditions such as -30 to -40 degrees Celsius?
Our catch can is safe to use in extreme cold conditions without issue!
Can a bad PCV also show up as high vacuum and idle when removing oil cap?
No, the main symptoms would be oil around the cap or PCV block, and testing would be as shown in the video.
Any chanse for ECU and TCU* tune for A6/7 55 TFSI? No tcu on market right now
Is the pcv hose and catch can work for the C8 S6 2.9L
Just the PCV hose will fit the C8 S6
Are the hose squeeze fittings improved over OEM at all or in any way less annoying to remove?
The squeeze fittings we use are much easier to remove and install, while still performing as needed for the pressures at play here.
@ my pre-artheritic hands thank you 🙏
I'd love to see an install video of the catch can system.
Potentially in the future!
Hiya 034 -- what's stopping someone from installing this in a B9 SQ5?
Edit: just read the webpage saying it's in development...!
What about upgraded breathing hoses for B8 platform? Are you working on it or plan to offer solution for that platform?
We're evaluating upgrades for the B8 3.0T platform, however the solution is a bit different for that platform.
Been having these issues for couple weeks now. Replaced cap twice and constantly keeps loosening….def need to order but before I do, is this problem covered under warranty? B9 2018
I think Audi issued an extended warranty for the PCV system. I had mine fail two years after I bought my RS5 and it was replaced under warranty.
@@fartampliferthe trouble with the warranty replacement is that it’s bound to fail again, which can potentially be catastrophic when it does. It’s best to resolve the root problem without waiting for it to fail again.
In some instances Audi will warranty the failed part, yes, however the replacement part is bound to fail again in the future, which can cause catastrophic results. For the very low cost on the 034 PCV Breather Hose, it’s best to remove the failure point altogether and make the problem an issue of the past.
@@034motorsport That's why I ordered the catch can kit. 🙂 Plus I also wanted a catch can since I do mostly city driving.
What are the odds you can do the same video for the B8/B8.5 2.0T?
@@skibinskibuilt the same principle applies, however with that product its the plate itself on the engine that is the weak point. That is why our catch can kit for that car replaces the entire PCV plate
For EA839, but does that include the Q7 4M.5? Some things are different between the S5 and Q7 although they share the same motor.
@@Sinister6_cuv yes this does apply to the EA839 found in the 4M.5 Q7 and Q8, however the 034Motorsport PCV Breather Hose is not yet available for this application. We’re working on finalizing that fitment currently.
@@034motorsportGreat, thanks. Hopefully that will be with a catch can too. Currently using an APR universal, but would love to rip it out and 034 everything. 🎉
Hey i ordered mine the day it was released. When do you think itll be shipped to canada ?
@@bobbyratcliff5905 we have published. ETA is on the website page where you ordered from, thank you.
Will it fit on a cts turbo inlet pipe?
This should work on any turbo inlet pipe where the OEM PCV Breather Hose also connects. If you’re still using the OEM PCV, then this kit should work fine for your car.